AD10T2
Hover over image to zoom in

AD10T2

$289.00 (USA and Canada only)

Availability: In stock
G1 100 Ohm RTD Analog Input Isolated

Production Specification

G1 I/O family

The AD10T2 is a 100 ohm platinum RTD analog input with a nominal temperature range of -50 °C to 350 °C (-58 °F to 662 °F). This module provides a single channel of optically isolated RTD temperature-to-digital conversion with 4,000 Vrms of transient isolation.

This module is suitable for temperature measurements where the RTD probe is grounded or when ground loop currents exist.

 

AD10T2

AD14T

RTD Input

100 Ω platinum (α = 0.00385)

10 Ω copper

Nominal Temperature Range

- 50 °C to 350 °C

- 55 °C to 150 °C

Nominal Temperature Range

- 58 °F to 662 °F

- 67 °F to 302 °F

Over/Under Range

- 60 °C to 812 °C

N/A

Over/Under Range

- 140 °F to 1493 °F

N/A

Accuracy

± 0.8 °C

± 0.6 °C

Resolution

12 bits

12 bits

Response Time

full scale step change in 100 ms

full scale step change in 100 ms

Isolation Transient
  Input-to-Output
  Input-to-Analog Supply

 

4,000 VRMS
4,000 VRMS

 

4,000 VRMS
4,000 VRMS

Power Requirements

45 mA at +15 (+/- 0.25) VDC and 45 mA at -15 (+/- 0.25) VDC

35 mA at +15 (+/- 0.25) VDC and 35 mA at -15 (+/- 0.25) VDC

Temperature
  Operating

 

0 °C to 70 °C
- 25 °C to 85 °C

 

0 °C to 70 °C
- 25 °C to 85 °C

Agency Approvals CE; RoHS; UKCA CE; RoHS; UKCA

Standard Analog RTD Input Modules Data Sheet

The AD10T2 and AD14T modules provide a single channel of optically-isolated RTD temperature-to-digital conversion with 4,000 V rms of transient isolation.

UKCA Declaration of Conformity (EMC, LVD, RoHS)

This document is the Manufacturer's Declaration of Conformity for the products listed herein, in accordance with the rules, regulations and standards of the United Kingdom. The models cited have been tested to the essential requirements listed in the Standards section, and fully comply with the legislation as listed in UK Legislation section.

Declaration of Conformity (EMC, LVD, RoHS)

This document is the Manufacturer's Declaration of Conformity for the products listed herein, in accordance with European, international, and/or national standards and regulations.

Opto 22 RoHS 3 Statement of Compliance - Restriction of Hazardous Substances

This document is a statement of compliance with the EU Directive 2015/863/EU, Restriction of Hazardous Substances (RoHS 3). This document lists Opto 22 products that comply with the substance restrictions of the RoHS 3 directive.

CE Declaration: EMC

This document is the Manufacturer's Declaration for the listed products as mentioned in the attachment - to which this confirmation refers - that they are in accordance with the mentioned European, international and/or national standards and regulations.

CE Declaration: Low Voltage

This document is the Manufacturer's Declaration for the listed products as mentioned in the attachment - to which this confirmation refers - that they are in accordance with the mentioned European, international and/or national standards and regulations.

No downloads are available for this product.
No videos or demos are available for this product.