Opto 22

43044 Business Park Drive, Temecula, CA 92590 USA
Local & outside the USA:(951) 695-3000
Toll-Free within the USA:(800) 321-6786
Fax: (951) 695-3095
Email: sales@opto22.com

Search Documents:

Filter by:
CategoryFormTitleDate
Product Data Sheets & Overviews2199 Digital I/O Carrier Board for Raspberry Pi Data Sheet
With Opto 22's Digital I/O Carrier Board for Raspberry Pi®, you can control industrial-level loads with a Raspberry Pi. Great for prototyping IIoT solutions, proofs of concepts, and projects where an industrially hardened controller isn't required.
12/5/2016
Product Data Sheets & Overviews0777 SNAP D Series Racks Data Sheet
The SNAP I/O D Series racks are designed for discrete control applications and can accommodate 4, 6, 8, or 12 SNAP 4-channel digital modules.
11/23/2016
Product Data Sheets & Overviews0274 G4 Digital I/O Mounting Racks (Header Connector) Data Sheet
The G4PB16H and G4PB8H Digital I/O Mounting Racks are designed for use with G4 digital I/O modules.

The G4PB8H accepts up to 8 digital I/O modules, and the G4PB16H accepts 16. Both racks work with Opto 22’s PBSA, PBSB, and PBSC power supplies.

This document provides the specifications, dimensions, and schematics for the G4PB16H and the G4PB8H.
11/21/2016
Product Data Sheets & Overviews0491 Digital Rack Power Supplies Data Sheet
The PBSA, PBSB, and PBSC 5 VDC power supplies are designed to work with an Opto 22 digital I/O mounting rack connected to an Optomux® E1 or B1 brain board, or a mistic™ B100 brain board. Each power supply is sized to provide power for the brain board and logic power for 16 digital I/O modules.

The PBSC can also be used with a Pamux® B5 brain board and is sized to provide power for the brain, 16 modules, and a Term1 Pamux bus terminator.

The PSBA, PSBC, and PSBC can also be used with a Raspberry Pi® and Opto 22’s Digital I/O Carrier Board for Raspberry Pi (part number OPTO-P1-40P) to monitor and control industrial devices.
11/21/2016
Product Data Sheets & Overviews1240 SNAP PAC System Enclosures Data Sheet

SNAP PAC System enclosures make it easy to install Opto 22 I/O where you need it. With a choice of rack, panel, and wall mounting, these enclosures provide convenience and protection for your processor and I/O.

Each enclosure includes an I/O mounting rack and a power supply, already wired. You add the I/O processor and the SNAP input and output (I/O) modules needed for your application.

11/18/2016
Product Data Sheets & Overviews2060 groov Data Sheet

groov is Opto 22’s way to build and view mobile operator interfaces to monitor and control systems and equipment from smartphones and tablets.

Using only a web browser, groov lets you quickly and securely build and deploy mobile interfaces for automation, monitoring, and control applications. No programming or coding required.

These operator interfaces can then be viewed on mobile devices using the free groov View apps for iOS and Android. They can also be viewed on any brand computer, mobile device, or web-enabled TV that has a web browser, regardless of the device's size or operating system.

10/24/2016
Product Data Sheets & Overviews1696 SNAP PAC System Specification Guide
This guide is a comprehensive introduction to the SNAP PAC System. The guide describes the system's four components (software, controllers, brains, and I/O); shows how to build a basic system and how to expand it; and includes installation instructions, wiring diagrams, dimensional drawings, and specifications for parts.
10/21/2016
Product Data Sheets & Overviews1182 SNAP Isolated Analog Input Modules Data Sheet
The isolated analog input modules described in this document are part of Opto 22's SNAP PAC System. They provide optical isolation, transformer isolation, and channel-to-channel isolation.
10/11/2016
Product Data Sheets & Overviews2011 Using Modbus Devices with Opto 22 Products Technical Note
This technical note introduces the Modbus protocol and gives you basic information for using it to communicate between Opto 22 products and other devices. Because Modbus and Modbus/TCP are handled differently by various manufacturers, the tech note describes specific areas that may be a concern and includes troubleshooting suggestions.
10/10/2016
Product Data Sheets & Overviews2020 SoftPAC Software-based Controller for PC-based Control
SoftPAC™ is a software-based programmable automation controller (PAC) designed for PC-based control. SoftPAC gives you the choice of running your control program in a Microsoft Windows environment rather than on a standalone or rackmounted PAC.
9/26/2016
Product Data Sheets & Overviews1756 SNAP TEX Cables and Breakout Boards Data Sheet
SNAP TEX cables and breakout boards are part of the SNAP TEX family of wiring and mounting accessories. These parts save time and expense during installation, maintenance, and debugging by reducing the time and effort required to wire field devices to SNAP I/O modules.
9/23/2016
Product Data Sheets & Overviews1684 SNAP PAC Racks Data Sheet

SNAP PAC racks mount one SNAP PAC brain or on-the-rack controller, plus up to 4, 8, 12, or 16 SNAP input/output (I/O) modules. Both standard wired controllers and brains and Wired+Wireless models are mounted on these racks.

I/O modules may be analog, digital, or serial modules. All module types can be mixed together on the same rack in any position.

9/23/2016
Product Data Sheets & Overviews1672 SNAP Motion Control Subsystem Data Sheet
The SNAP-SCM-MCH16 motion control host module is a serial communication module that links up to four SNAP-SCM-BB4 motion control breakout boards with a SNAP PAC brain or rack-mounted controller. When mounted on a SNAP PAC rack and connected to a breakout board, a single SNAP-SCM-MCH16 module allows a SNAP PAC controller running a PAC Control™ programming strategy to control up to 16 stepper motors.
9/20/2016
Product Data Sheets & Overviews1919 SNAP SSI (Serial Synchronous Interface) Module Data Sheet
The SNAP-SCM-SSI module provides two individually isolated serial synchronous interface (SSI) inputs for acquiring data from linear or rotary transducers used in motion control.
9/20/2016
Product Data Sheets & Overviews1949 SNAP Reed Relay Modules Data Sheet

The SNAP Reed Relay modules use reed relays and do not provide optical isolation. Current rating depends on the voltage the module is used with. These modules were designed for a very low-voltage DC load that is purely resistive (no inrush current). Because of their low 10 VA rating, these modules cannot be used with inductive or capacitive loads (even very small loads) nor 120 VAC.

NOTE: For many applications a better choice is one of the SNAP-OMR6 series modules, which can handle a full 6 A at 0-250 VAC or 0-30 VDC.

9/20/2016
Product Data Sheets & Overviews1967 SNAP Mechanical Power Relay Output Module Data Sheet

The SNAP-OMR6T-C and SNAP-OMR6-C mechanical power relay output modules give you four isolated channels for switching loads up to 6 amps at 250 VAC or 30 VDC.

NOTE: Specifications and wiring diagrams for the obsolete SNAP-OMR6-A module are included in this data sheet for reference.

9/20/2016
Product Data Sheets & Overviews1944 SNAP-SCM-ST2 Pulse Output Module Data Sheet
The SNAP-SCM-ST2 pulse output module is a two-channel serial communication module that provides pulse and direction signals for stepper motor drives.
9/20/2016
Product Data Sheets & Overviews1537 SNAP-SCM-CAN2B Communication Module Data Sheet
The SNAP-SCM-CAN2B is a high-speed serial communications module that provides one channel for transmitting data to or receiving data from devices on a Controller Area Network (CAN).

The SNAP-SCM-CAN2B module is designed for use with Opto 22’s SNAP PAC R-series controllers and SNAP PAC EB-series brains. The brain or controller processes the data from the module and can communicate the data to other parts of an Opto 22 SNAP PAC System™ or to another system (such as a Modbus® system or an OPC client).

9/20/2016
Product Data Sheets & Overviews2080 HART SNAP I/O Modules Data Sheet

HART® SNAP I/O modules for analog current input and output provide communication with other Highway Addressable Remote Transducer (HART) current loop devices.

9/20/2016
Product Data Sheets & Overviews1184 SNAP Serial Communication Modules Data Sheet

SNAP serial communication modules are designed for use with the SNAP PAC System and can also be used in I/O units without a controller. Each module provides one or two channels of serial data—RS-232 or RS-485/422—at a remote Ethernet location, on the same mounting rack with digital and analog I/O.

This document describes the SNAP-SCM-232 and SNAP-SCM-485-422 serial communication modules.

9/20/2016
Product Data Sheets & Overviews1144 SNAP Digital Output Modules Data Sheet
Opto 22 SNAP digital output modules are designed to mount on SNAP PAC racks and be used with SNAP PAC brains and R-series controllers, both standard wired and Wired+Wireless models. Customers can choose from AC or DC output modules.

These modules are also compatible with SNAP D-series and legacy M-series and B-series racks, and they can be used with legacy Ethernet-based brains as well as other SNAP brains, such as the serial B3000 or the B3000-HA.
9/20/2016
Product Data Sheets & Overviews1065 SNAP Analog Input Modules Data Sheet

SNAP I/O analog input modules are part of Opto 22's SNAP PAC System. This document includes descriptions, specifications, and wiring and dimensional diagrams for most analog input modules.

For analog modules with channel-to-channel isolation, see form #1182.

9/20/2016
Product Data Sheets & Overviews1066 SNAP Analog Output Modules Data Sheet
SNAP I/O analog output modules are part of Opto 22's SNAP PAC System. This document includes descriptions, specifications, and wiring and dimensional diagrams for all SNAP analog output modules.
9/20/2016
Product Data Sheets & Overviews0773 SNAP Digital Input Modules Data Sheet
SNAP digital input modules are designed to work with SNAP PAC racks and can sense either AC or DC signals. All SNAP digital input modules are compatible with SNAP PAC brains and R-series controllers, including Wired+Wireless models.

Most digital input modules are also compatible with SNAP D-series or legacy M-series and B-series racks and with the brains that mount on them.
9/20/2016
Product Data Sheets & Overviews1416 SNAP-pH/ORP Module
The SNAP-pH/ORP module provides two isolated channels of high-impedance voltage input, either -1.00 to +1.00 volts or -0.50 to +0.50 volts. The module is ideal for differential voltage measurements and is used with pH or oxidation reduction potential (ORP) probes for monitoring bodies of water such as holding tanks, swimming pools, and cooling towers.
9/20/2016
Product Data Sheets & Overviews1453 SNAP Power Monitoring Modules Data Sheet

This data sheet describes the SNAP-AIPM, SNAP-AIPM-3, and SNAP-AIPM-3V analog input modules. These modules monitor AC voltage and current through a SNAP PAC rack-mounted controller or SNAP PAC brain.

The SNAP-AIPM monitors single-phase AC. The SNAP-AIPM-3 and SNAP-AIPM-3V monitor three-phase AC.

The SNAP-AIPM not only measures volts and amps simultaneously, but also calculates true power and volt-amps. From these values, you can easily calculate power factor. The SNAP-AIPM-3 and SNAP-AIPM-3V measure volts and amps and calculate true power and volt-amps for each of the three phases, and in addition calculate true power sums for all three.

9/20/2016
Product Data Sheets & Overviews1365 SNAP Wiegand Module Data Sheet
Ideal for access control applications, the SNAP-SCM-W2 serial communication module provides two channels of data input from attached devices that comply with the Wiegand interface format. The module works with analog/digital/serial SNAP Ultimate and SNAP Ethernet brains and with SNAP-IT units.
9/20/2016
Product Data Sheets & Overviews1556 SNAP High-Density Digital Modules Data Sheet

SNAP I/O high-density digital modules from Opto 22 provide 16 or 32 digital input or output points in one compact SNAP module. These modules are ideal for OEMs and others who have high point-count applications, or for anyone requiring more than 64 digital points on a single SNAP PAC rack. The high-density configuration reduces per-point costs of digital I/O systems by providing up to eight times as many I/O points in the same space.

SNAP high-density digital modules are part of the SNAP PAC System. They can also be used as part of intelligent remote I/O with an Allen-Bradley Logix PLC system.

HDD modules require a SNAP PAC R-series controller or a SNAP PAC brain for I/O processing. These modules work with standard wired controllers and brains and with Wired+Wireless models.

9/20/2016
Product Data Sheets & Overviews1590 SNAP Load Cell Modules Data Sheet

The SNAP-AILC and SNAP-AILC-2 load cell input modules each provide one channel of transformer and optically isolated analog-to-digital conversion for load cell inputs. These modules also provide isolated 10 VDC bridge excitation for up to four 350 ohm load cells.

This data sheet includes descriptions, specifications, and wiring and dimensional diagrams.

9/20/2016
Product Data Sheets & Overviews1585 SNAP Profibus Communication Module Data Sheet

The SNAP-SCM-PROFI module is a high-speed serial communications module that provides a standard electrical interface between Opto 22's Ethernet-based SNAP PAC System and PROFIBUS DP® networks. The SNAP-SCM-PROFI module is designed for use with Opto 22’s SNAP PAC R-series controllers and SNAP PAC EB brains, both the standard wired models and the Wired+Wireless models.

9/20/2016
Product Data Sheets & Overviews1053 SNAP Two-Axis Quadrature Input Module Data Sheet
The SNAP-IDC5Q quadrature input module is designed to allow a SNAP I/O unit to resolve two axes of rotating position information from quadrature encoder devices.
9/19/2016
Product Data Sheets & Overviews2060CS groov Data Sheet - Castilian
groov Data Sheet - Castilian
9/8/2016
Product Data Sheets & Overviews1693 Legacy and Current SNAP Product Comparison and Compatibility Charts
This document compares SNAP PAC System hardware and software with legacy Opto 22 SNAP systems and provides compatibility information in a series of detailed charts.

If you're combining SNAP PAC System components with older SNAP hardware and software, also consult form #1688, the SNAP PAC System Migration Technical Note.
9/2/2016
Product Data Sheets & Overviews1594 SNAP PAC R-Series Controller Data Sheet
This data sheet describes Opto 22's SNAP PAC R-series programmable automation controllers, part of the SNAP PAC System. A SNAP PAC R-series controller is an on-the-rack, industrially hardened unit that handles multiple control, automation, and data acquisition tasks involving digital and analog control, serial string handling, PID, and enterprise connectivity.
9/1/2016
Product Data Sheets & Overviews1662 OptoDataLink Data Sheet
OptoDataLink, part of the PAC Project Professional software suite, provides data exchange between the SNAP PAC System and popular databases such as Microsoft® SQL Server®, Access®, and MySQL®.
8/29/2016
Product Data Sheets & Overviews2072 ICTD Temperature Probes Data Sheet
ICTD temperature probes are temperature sensors used with Opto 22 ICTD analog input modules, including SNAP, G4, and Standard (G1) modules.
8/18/2016
Product Data Sheets & Overviews1677 SNAP PAC Controller and Brain Comparison Chart
This document compares features of SNAP PAC hardware controllers (SNAP PAC S-series and R-series) and SNAP PAC brains, all part of the SNAP PAC System.
7/22/2016
Product Data Sheets & Overviews1780 PAC Terminal SSD Data Sheet
PAC Terminal SSD (Secure Strategy Distribution™) is a special version of PAC Terminal that allows you to to safely distribute a PAC Control strategy (either Basic or Pro) and to protect it once it is downloaded to a controller. PAC Terminal SSD also can ensure that new controller firmware is from Opto 22 and has not been modified by anyone.
7/21/2016
Product Data Sheets & Overviews2037 SNAP PAC Controller Comparison Chart

This chart compares details for all SNAP PAC programmable automation controllers: SoftPAC software controller, SNAP PAC S-series standalone controllers, and SNAP PAC R-series rack-mounted controllers.

For additional details on SNAP PAC R-series controllers (including specific I/O processing features), see the SNAP PAC Controller and Brain Comparison Chart, form 1677.

7/21/2016
Product Data Sheets & Overviews1699 PAC Project Data Sheet
The PAC Project software suite is one of the four components of the SNAP PAC System. PAC Project comes in two forms: Basic and Professional.

PAC Project Basic is included free in your purchase of a SNAP PAC controller. It includes everything you need for most automation or monitoring applications: control programming, HMI development, and I/O configuration software.

PAC Project Professional is available for purchase as a suite or as individual software components. It includes everything in Basic and adds OPC communication, database connectivity, additional features, and support for legacy Opto 22 hardware.
7/21/2016
Product Data Sheets & Overviews0548 G4 Digital 2-Channel Quadrature DC Input Module Data Sheet
The G4IDC5Q quadrature input module pair is designed to allow a digital mistic 200 multi-function I/O Brick to resolve positional information from quadrature encoder devices.
7/14/2016
Product Data Sheets & Overviews1569 SNAP PAC System Product Guide
This document lists and describes all Opto 22 SNAP PAC System part numbers, including PAC Project software, SNAP PAC controllers, SNAP PAC brains, and SNAP I/O modules of all kinds. SNAP PAC mounting racks and SNAP power supplies are also listed.
6/9/2016
Product Data Sheets & Overviews1584 SNAP PAC S-Series Controllers Data Sheet
This data sheet describes Opto 22's SNAP PAC S-series programmable automation controllers. SNAP PAC S-series controllers are standalone industrial controllers that are used as part of an Opto 22 SNAP PAC System.
6/2/2016
Product Data Sheets & Overviews1567 E1 and E2 Architecture and Migration Overview
The E1 and E2 brain boards are Ethernet-ready I/O and communication processors for digital and analog I/O systems. Designed as drop-in replacements for Opto 22's serial-based B1 and B2 brain boards, the E1 and E2 support both serial and Ethernet networking and multiple simultaneous protocols, including Optomux, OptoMMP, and Modbus/TCP.

This overview describes the system capabilities of the E1 and E2 and illustrates methods for migrating existing Optomux systems to use Ethernet networking, while preserving existing I/O racks, modules, and field wiring.

5/27/2016
Product Data Sheets & Overviews1120 SNAP Power Supplies Data Sheet
SNAP power supplies provide the best source of AC or DC power for your Opto 22 SNAP PAC hardware. Packaged in a compact, sturdy housing, SNAP power supplies include a built-in fuse, an LED status indicator, and an ON/OFF power switch for ease of use.

This document provides information and specifications for SNAP-PS5, SNAP-PS5U, SNAP-PS24, SNAP-PS24U, and SNAP-PS5-24DC power supplies. It includes power supplies that were previously documented in form #953 (0953) as well as those covered in form #1120.
5/6/2016
Product Data Sheets & Overviews1689 SNAP PAC Brains Data Sheet

SNAP PAC brains are powerful and versatile I/O and network communications processors. Designed primarily to work in distributed systems controlled by a SNAP PAC controller, SNAP PAC Ethernet brains can also be used as intelligent remote I/O for Allen-Bradley Logix-based PLC systems.

SNAP PAC brains provide local intelligence for functions such as latching, counting, thermocouple linearization, watchdog timers, and PID loop control.

4/15/2016
Product Data Sheets & Overviews1778 Modules, Cables, and Breakout Boards Compatibility Charts
This document shows which SNAP I/O modules, breakout boards, and cables can be used together.
3/17/2016
Product Data Sheets & Overviews1487 OptoOPCServer Data Sheet
This data sheet describes OptoOPCServer, part of the PAC Project software suite. OptoOPCServer is an OPC 2.0-compliant server that connects your OPC client software with Opto 22 Ethernet-based controllers and I/O units.
2/12/2016
Product Data Sheets & Overviews2060C groov Data Sheet - Catalan
groov Data Sheet - Catalan
1/11/2016
Product Data Sheets & Overviews0459 G4 Digital 32-Channel Rack Data Sheet
The G4PB32H I/O mounting rack can accommodate up to 32 Generation 4 digital I/O modules. It has a header connector and is typically used with a PAMUX B4 Brain Board.
12/30/2015
Product Data Sheets & Overviews1772 SNAP TEX Mounting/Wiring Tools and Spare Parts Data Sheet
SNAP TEX wiring and mounting accessories are covered in two data sheets. This document includes DIN-rail mounting kits, rack accessories, spare parts, and tools. For cables and breakout boards, see form #1756.
12/21/2015
Product Data Sheets & Overviews1777 DIN-Rail Mounting Clip Compatibility Chart
This compatibility chart shows which DIN-rail kit or clip to use with your SNAP power supply, controller, I/O mounting rack, breakout board, or classic brain board.
12/21/2015
Product Data Sheets & Overviews1639 SNAP PAC Learning Center Data Sheet
The SNAP PAC Learning Center is a fully functioning package of Opto 22 hardware and software designed to help you learn how to use the SNAP PAC System to meet your control, monitoring, and data acquisition needs.

9/11/2015
Product Data Sheets & Overviews2150 groov Action Plan Data Sheet

The groov Action Plan gives you a simple, effective mobile operator interface—your own custom mobile app designed for your automation systems and equipment—without having to build or configure it yourself.

8/4/2015
Product Data Sheets & Overviews0492 Strap2 and Strap8 Jumper Straps Data Sheet
Jumper straps are available for applications which require that one line of many adjacent I/O module positions be connected together.
7/6/2015
Product Data Sheets & Overviews0859 Solid-State Relays (SSRs) Data Sheet
Opto 22 provides a full range of reliable solid-state relays (SSR). This data sheet includes descriptions, specifications, dimensional drawings, and application information.
6/25/2015
Product Data Sheets & Overviews0512 Standard Digital 16-Channel Rack Data Sheet
The PB16A I/O mounting rack can accommodate up to 16 single-channel standard (G1) digital I/O modules.
5/28/2015
Product Data Sheets & Overviews0253 G4 Digital DC Input Modules Data Sheet
Opto 22’s G4 DC input modules are used to detect on/off DC voltage levels.
5/1/2015
Product Data Sheets & Overviews0440 Standard Voltage Input Modules Data Sheet
Voltage input analog modules provide a single channel of optically isolated voltage-to-digital conversion.
3/27/2015
Product Data Sheets & Overviews0444 Standard Analog RTD Input Modules Data Sheet
The AD10T2 and AD14T modules provide a single channel of optically-isolated RTD temperature-to-digital conversion with 4,000 V rms of transient isolation.
3/27/2015
Product Data Sheets & Overviews1990 OptoEMU Sensor DR (Demand Response) Data Sheet

The OptoEMU Sensor™ Energy Monitoring Unit with Demand Response (DR) monitors the electrical energy used in your facility and then signals electrical equipment to turn on or off in response to a request from an electric utility, demand response aggregator, or curtailment service provider (CSP).

To reduce peak energy use that triggers demand charges, electrical equipment loads can also be shed on predefined usage thresholds.

The OptoEMU Sensor DR makes it easy to reduce your energy costs by managing energy consumption, taking advantage of demand response programs, and gaining control over your energy pricing.

3/26/2015
Product Data Sheets & Overviews1981 G4EB2 Brain Data Sheet
The G4EB2 brain replaces a 32-channel digital brain in a serial or Pamux system with an Ethernet-based 32-channel brain that uses the OptoMMP protocol. Three part numbers are available for specific purposes.
12/15/2014
Product Data Sheets & Overviews2117 PAC Project 9.4 Release Notes

Release Notes for PAC Project Software Suite, version 9.4. PAC Project Basic provides control programming, HMI development and runtime, and configuration and utility programs. PAC Project Professional adds a robust OPC server, database connectivity, multiple PAC Display seats, controller redundancy, and legacy hardware support.

These release notes include new features and enhancements for PAC Control, PAC Display, PAC Manager, OptoOPCServer, SoftPAC, and OptoDataLink, as well as important notes on installation and use. For more details on bug fixes, see the PAC Project Readme Notes.

9/25/2014
Product Data Sheets & Overviews1546 E1 and E2 Brain Board Data Sheet

E1 and E2 brain boards are Ethernet-ready I/O and communication processors for digital and analog I/O systems. Each brain board communicates with a host computer and performs control functions for its I/O points.

Designed as drop-in replacements for Opto 22's serial-based B1 and B2 brain boards, E1 and E2 brain boards support simultaneous serial and Ethernet networking plus multiple simultaneous protocols, including Optomux, OptoMMP, and Modbus/TCP.

8/19/2014
Product Data Sheets & Overviews1936 OptoEMU Sensor 3V Data Sheet

The OptoEMU Sensor™ Energy Monitoring Unit monitors the electrical energy used in your facility and then delivers that data to online software applications, using your existing wired or wireless Ethernet network.

Energy data can also be incorporated into a control system, including the SNAP PAC System and systems communicating via Modbus/TCP or OPC. In addition, data can be sent to common SQL databases.

The OptoEMU Sensor gives you the detailed, real-time data you need to analyze energy consumption, manage use, and reduce energy costs.

8/8/2014
Product Data Sheets & Overviews1681 PAC Project Basic and Professional Comparison Chart
This chart compares the features included in PAC Project Basic and Professional. These software suites are part of the SNAP PAC System.
7/24/2014
Product Data Sheets & Overviews0261 PCI-AC5, PCIe-AC5, AC5, and G4AC5 Adapter Cards Data Sheet
The PCI-AC5, PCIe-AC5, AC5, and G4AC5 adapter cards provide a PC interface for Opto 22 digital I/O mounting racks.
6/11/2014
Product Data Sheets & Overviews0508 G4 Jumper Strap Data Sheet
The G4STRAP is ideal for applications that require a common connection between each I/O module position and can be used on all G4 I/O mounting racks.
5/15/2014
Product Data Sheets & Overviews1038 SNAP PAC Racks Assembly and Installation
This document comes packed in the box with a SNAP PAC I/O mounting rack. It shows where to find assembly and installation instructions, plus wiring accessories.
5/6/2014
Product Data Sheets & Overviews0442 Standard Analog Current Output Modules Data Sheet
The current output modules provide a single channel of optically-isolated digital-to-current conversion.
4/10/2014
Product Data Sheets & Overviews0529 Quad Pak Digital 32-Channel Rack Data Sheet

The PB32DEC I/O mounting rack is a 32-channel mounting rack that can accommodate up to eight Quad Pak I/O modules.

Use an OD-series cable with this rack. See the Classic Cables Data Sheet (form 0490) for more information.

3/20/2014
Product Data Sheets & Overviews0364 G4 Digital Dry Contact Output Modules Data Sheet
Opto 22’s G4 family of modules includes two dry-contact, low-contact-resistance DC output modules, the G4ODC5R and the G4ODC5R5.
3/6/2014
Product Data Sheets & Overviews0784 SNAP I/O Racks Data Sheet
SNAP B-series mounting racks are designed to hold an intelligent SNAP I/O processor (either a SNAP brain or an on-the-rack controller) and several I/O modules.

This data sheet includes detailed information and specifications for SNAP B-series racks as well as the digital-only SNAP-D64RS rack. Rack fuses and DIN-rail adapters are also included in the data sheet.

B-series racks are used with serial and some Ethernet I/O processors. With Ethernet processors such as the SNAP-B3000-ENET, B-series racks hold analog, digital, and serial modules. With serial processors such as the serial B3000 brain, they hold analog and digital modules.

NOTE: For racks to use with SNAP PAC brains and rack-mounted controllers, or with SNAP-UP1-M64 and SNAP Simple brains, see form #1684, the SNAP PAC Racks Data Sheet.
2/28/2014
Product Data Sheets & Overviews1165 PC-Based I/O Overview

This document shows examples of system architecture for PC-based I/O control systems and lists Opto 22 products that work together for PC-based control. System examples include:

- Ethernet systems using SoftPAC, a software-based programmable automation controller programmed with PAC Control
- Ethernet systems using the OptoMMP protocol
- Direct control of I/O using no I/O processor (no brain)
- Serial control using a brain and the mistic or Optomux protocol
- High-speed control using the Pamux protocol

11/15/2013
Product Data Sheets & Overviews1457 PCI-AC51 and PCIe-AC51 Adapter Card Data Sheet

The PCI-AC51 and PCIe-AC51 are high-speed adapter cards designed to link the Pamux® bus to PCI-compatible or PCI Express-compatible computers.
- The PCI-AC51 is compatible with a standard PCI bus.
- The PCIe-AC51 is compatible with PCI Express.

11/14/2013
Product Data Sheets & Overviews0463 Optomux 16-Channel Digital and Analog Brain Boards Data Sheet
The B1 digital and B2 analog Optomux brain boards are intelligent digital processors that operate as slave devices to a host computer. Each brain board contains a microprocessor that provides the necessary intelligence to communicate with a host computer and also perform control functions at each channel of I/O.
7/22/2013
Product Data Sheets & Overviews1699C El Software PAC Project (Catalan)
(Catalan)
6/21/2013
Product Data Sheets & Overviews1699CS El Software PAC Project (Castellano)
(Castellano)
6/3/2013
Product Data Sheets & Overviews1699S El Software PAC Project (Spanish)
(Spanish)
5/17/2013
Product Data Sheets & Overviews0252 G4 Digital AC Output Modules Data Sheet
Opto 22’s G4 AC output modules are used to control or switch AC loads.
5/3/2013
Product Data Sheets & Overviews0429 G4 Analog ICTD Input Module Data Sheet
The G4AD4 analog input module works in conjunction with Opto 22’s ICTD probes and other industry-standard ICTDs. The module provides a single channel of optically isolated temperature-to-digital conversion.
5/1/2013
Product Data Sheets & Overviews0446 Standard Analog ICTD Temperature Module Data Sheet
The AD4 module provides a single channel of optically-isolated temperature-to-digital conversion.
4/30/2013
Product Data Sheets & Overviews2036 Network LED Dimmer Data Sheet

The Opto 22 Network LED Dimmer is a constant voltage PWM (pulse width modulation) dimmer that controls light-emitting diodes (LEDs). Used alone or in tandem, this compact dimmer is suited for applications involving LED color mixing; roadway, step, or path marking; backlighting; facade or wall lighting; or any other use that requires variable light from LEDs.

Use the Network LED Dimmer to control LEDs either manually or through standard serial protocols—including DMX512-A, Modbus/ASCII, and Optomux—and incorporate lighting control into existing building, automation, and lighting control systems.

1/10/2013
Product Data Sheets & Overviews0489 Opto 22 Fuses (for All Products) Data Sheet
Describes fuses used in Opto 22 racks, modules, power supplies, and other Opto 22 products.
1/7/2013
Product Data Sheets & Overviews0443 Standard Analog Current Input Modules Data Sheet
The AD3 and AD3T modules provides a single channel of optically-isolated current-to-digital conversion.
12/12/2012
Product Data Sheets & Overviews0254 G4 Digital DC Output Modules Data Sheet
Opto 22’s G4 DC output modules are used to control or switch DC loads.
9/21/2012
Product Data Sheets & Overviews0251 G4 Digital AC Input Modules Data Sheet
Opto 22’s G4 AC input modules are used to detect on/off AC or DC voltage levels.
9/20/2012
Product Data Sheets & Overviews0448 Standard AC Input Modules Data Sheet
AC input modules are used for sensing ON/OFF alternating current (AC) voltage levels.
9/20/2012
Product Data Sheets & Overviews0449 Standard Digital AC Output Modules Data Sheet
AC output modules are used for controlling or switching AC loads.
9/20/2012
Product Data Sheets & Overviews0450 Standard Digital DC Output Modules Data Sheet
DC output modules are used for controlling or switching DC loads.
9/20/2012
Product Data Sheets & Overviews0451 Standard Digital DC Input Modules Data Sheet
Input modules are used for sensing ON/OFF voltage levels.
9/20/2012
Product Data Sheets & Overviews1291 SNAP Ultimate Brain Data Sheet
The SNAP Ultimate brain is an I/O and communications processor that mounts on a standard SNAP rack. The brain features 10/100 Mbps Fast Ethernet connectivity, programmability, and built-in enterprise connectivity. The brain is programmed using flowchart-based ioControl programming software, which is included in the purchase price of the SNAP Ultimate brain.

NOTE: Although fully supported and still in production, this is a legacy product and not recommended for new development. For new development, see the SNAP PAC R-series controllers—they are more powerful, have two Ethernet network interfaces, run the latest PAC Project software, and are less expensive.
9/17/2012
Product Data Sheets & Overviews1938 Split-Core Current Transformers Data Sheet

Split-core current transformers (CTs) offer an easy, safe, and inexpensive method for monitoring electrical energy usage. This data sheet describes split-core CTs with a 0.333 VAC secondary.

These CTs are recommended for use with the OptoEMU Sensor 3V energy monitoring unit and with SNAP-AIPM-3V analog input modules, which monitor energy using CTs with a 333 mV secondary.

8/17/2012
Product Data Sheets & Overviews0490 Cables (Classic) Data Sheet
Opto 22 supplies several standard 50-conductor, ribbon cables that interface with various host controllers.
8/15/2012
Product Data Sheets & Overviews0480 Standard DC Input 16-Channel Integral Rack Data Sheet
The PB16J and PB16K DC input racks provide 16 channels of optically-isolated inputs for sensing ON/OFF DC voltage levels.
7/31/2012
Product Data Sheets & Overviews0481 Standard DC Output 16-Channel Integral Rack Data Sheet
The PB16L DC Output Rack provides 16 individual channels of optically-isolated output for controlling or switching small DC loads.
7/31/2012
Product Data Sheets & Overviews0778 SNAP D Series Racks (with Terminal Strip) Data Sheet
The SNAP I/O D Series racks are designed for discrete control applications and can accommodate 4, 6, 8, or 12 SNAP 4-channel digital modules. These MC and MC-P model racks provide a screw-type terminal strip for additional wiring requirements.
6/29/2012
Product Data Sheets & Overviews0486 Quad Pak AC Output Modules Data Sheet
Quad Pak modules contain the equivalent of four, single channel I/O circuits in a single high-density package.
6/20/2012
Product Data Sheets & Overviews0488 Quad Pak DC Output Modules Data Sheet
Quad Pak modules contain the equivalent of four single channel I/O circuits in a single high-density package.
6/20/2012
Product Data Sheets & Overviews0434 3.6V Controller Memory Battery Data Sheet
The G4BATT32 is a kit to replace a discharged memory retention battery on the Opto 22’s G4 and M4 Controllers.
6/13/2012
Product Data Sheets & Overviews0739 B6 Analog Brain Board Data Sheet and Installation Notes
The Pamux B6 is an addressable analog brain board that can control up to 16 input and output points in distributed I/O applications. The B6 is designed for use with Opto 22 mounting racks.
6/12/2012
Product Data Sheets & Overviews0460 G4 Digital 16-Channel (isolated control) Rack Data Sheet
The G4PB16I I/O mounting rack accommodates up to 16 G4 digital I/O modules and features channel-to-channel isolation between all field and control circuits.
6/4/2012
Product Data Sheets & Overviews0441 Standard Voltage Output Modules Data Sheet
The voltage output analog module provides a single channel of optically-isolated digital-to-voltage conversion.
10/27/2011
Product Data Sheets & Overviews0439 Standard Thermocouple Input Modules Data Sheet
The thermocouple analog modules provide a single channel of optically isolated temperature-to-digital conversion.
10/26/2011
Product Data Sheets & Overviews0445 Standard 0-5 Amp AC/DC Current Input Module Data Sheet
The AD16T module provides a single channel of optically-isolated true RMS current-to-digital conversion.
10/26/2011
Product Data Sheets & Overviews0497 Standard Analog 28-140 VAC Input Module Data Sheet
The AD15T module provides a single channel of optically-isolated voltage-to-digital conversion with 4,000 V rms transient-isolation.
10/26/2011
Product Data Sheets & Overviews0988 Mistic 200 Power Supplies Data Sheet
Four models of input power supplies are available for the G4LC32 and G4LC32SX controllers, and the family of mistic I/O bricks.
10/13/2011
Product Data Sheets & Overviews1364 Flat Pak I/O Module Data Sheet

Because of their low profile, Flat Pak modules are ideal for user-designed printed circuit boards where the standard single-channel or Quad Pak modules do not provide an exact fit.

Flat Pak modules include AC and DC input and output modules.

9/14/2011
Product Data Sheets & Overviews0882 OptoDriver Toolkit for Custom PC-based Control Data Sheet
The OptoDriver Toolkit provides the tools necessary to build custom PC-based control and SCADA solutions using Opto 22 I/O systems and controllers.
7/25/2011
Product Data Sheets & Overviews0452 Standard 16-Channel (with header connector) Rack Data Sheet
The PB16H I/O mounting rack can accommodate any combination of 16 standard single-channel digital I/O modules.
5/27/2011
Product Data Sheets & Overviews0245 G4 Digital 24-Channel Mounting Rack Data Sheet
The G4PB24 I/O mounting rack accommodates up to 24 G4 I/O modules secured by a threaded captive hold-down screw.
5/2/2011
Product Data Sheets & OverviewsRM_TOD_SCHED_EX Time of Day Scheduler Example Readme
This readme file applies to the Time of Day Scheduler Example for PAC Project. The PAC Project files provide an introductory example of how to implement time of day scheduling for events. For more information, see form 1916, the Time of Day Scheduler Example Technical Note.
4/4/2011
Product Data Sheets & Overviews0453 Standard Digital Output Reed Relay Module Data Sheet
The ODC5R is a Form A mechanical relay I/O module. This module is ideal for applications requiring a dry-contact closure.
2/1/2011
Product Data Sheets & Overviews0250 G4 Digital 16-Channel Mounting Rack with Terminal Strip
The G4PB16T I/O mounting rack accommodates up to 16 G4 I/O modules and features an extra terminal strip.
1/25/2011
Product Data Sheets & Overviews0519 AC38 RS-485 Datalink Repeater Data Sheet
The AC38 is an optically-isolated RS-485 repeater and can operate at up to 115.2 Kbaud.
9/15/2010
Product Data Sheets & Overviews1901 SNAP PAC Redundancy Option Kit Data Sheet

This data sheet describes the SNAP PAC Redundancy Option Kit, which includes a SNAP-PAC-SRA arbiter, a SNAP-RPSW redundant power switch, and the SNAP PAC Redundancy Option User’s Guide, form 1831.

The SNAP PAC Redundancy Option Kit provides you the tools you need to develop a control system with redundant controllers that provides an increased level of reliability that can survive single points of failure and improve your system’s mean time between failures (MTBF).

8/12/2010
Product Data Sheets & Overviews1106 SNAP-LCM4 Data Sheet
The SNAP-LCM4 is a powerful industrial controller that provides real-time control and communication to input/output (I/O) systems, serial devices, motion controllers, and networks.
6/21/2010
Product Data Sheets & Overviews1927 Configuring the B3000-B Technical Note

This document shows basic configuration data for the B3000-B serial brain, a drop-in replacement for the obsolete B3000. This document is included in the box when you receive a B3000-B brain.

For more complete information on the B3000-B, see form #1781, the B3000-B Serial Brain User's Guide.

6/9/2010
Product Data Sheets & Overviews1794 B3000-B Serial Brain Data Sheet
The B3000-B is a mistic serial brain designed as a modern drop-in replacement for the B3000. The B3000-B has the same functionality as the B3000, except that it does not support the Optomux protocol.
5/14/2010
Product Data Sheets & Overviews1051 SNAP Analog/Digital Modbus Slave Brain Board Data Sheet

The SNAP-B3000-Modbus is a high-performance processor designed to remotely control a mix of both analog and digital I/O modules on a SNAP B-series I/O mounting rack.

The SNAP-B3000-MODBUS works with any Modbus master device. The brain communicates to its master controller via RS-485 using the Modbus slave protocol in both ASCII and RTU modes.

3/4/2010
Product Data Sheets & Overviews1674 Opto 22 SSR Overview
One-page overview of Opto 22 solid-state relays (SSRs)
2/25/2010
Product Data Sheets & Overviews1815 Opto 22 Energy Monitoring Unit Data Sheet

The Opto 22 Energy Monitoring Unit (OptoEMU1) is a complete package of hardware and software that lets you monitor energy usage for a 3-phase electrical device—such as an air conditioning and heating unit, compressor, or electric motor—so you can anticipate energy bills and respond quickly when energy use rises unexpectedly.

The package also includes sample control and HMI files that you can use as examples or modify to suit your application.

2/24/2010
Product Data Sheets & Overviews0994 Quad Pak 32-Channel Rack Data Sheet
The PB32HQ I/O mounting rack is designed to mate with the PAMUX 32-channel Brain Board (P/N B4). This mounting rack has a header connector.
10/19/2009
Product Data Sheets & Overviews0484 Standard Analog 16-Channel Mounting Rack Data Sheet
The PB16AH I/O mounting rack can accommodate up to 16 standard analog I/O modules in any combination.
8/13/2009
Product Data Sheets & Overviews1892 N-TRON716FX2-ST Data Sheet

This data sheet describes the N-TRON716FX2-ST, a managed Ethernet switch with 14 10/100BaseTX copper ports and two 100BaseFX fiber optic ports with ST connectors. This is a plug & play unit with advanced management features, ideal for industrial use.

8/6/2009
Product Data Sheets & Overviews1633 Comparison Chart: SNAP 4-Channel and High-Density Digital Modules
This document compares 4-channel and high-density SNAP digital I/O modules.
8/6/2009
Product Data Sheets & Overviews1893 N-TRON716TX Data Sheet

This data sheet describes the N-TRON716TX, a fully managed Ethernet switch with 16 10/100BaseTX copper ports, ideal for industrial use.

8/5/2009
Product Data Sheets & Overviews1880 N-TRON708TX Data Sheet

This data sheet describes the N-TRON708TX, a highly reliable, fully managed Ethernet network switch for use in industrial automation. The switch has eight 10/100BaseTX copper ports.

8/5/2009
Product Data Sheets & Overviews1881 N-TRON708FX2-ST Data Sheet

This data sheet describes the N-TRON708FX2-ST, a highly reliable, fully managed Ethernet network switch for use in industrial automation. The switch has six 10/100BaseTX copper ports and two 100BaseFx fiber optic ports with ST connectors.

8/5/2009
Product Data Sheets & Overviews1833 N-TRON304TX-N Data Sheet

This data sheet describes the N-TRON304TX-N, a compact, unmanaged Ethernet switch with the ability to withstand harsh industrial environments.

8/4/2009
Product Data Sheets & Overviews1886 N-TRON302MC-N-ST Data Sheet

This data sheet describes the N-TRON302MC-N-ST, a media converter that lets you connect 10/100BaseTX Ethernet devices to your 100BaseFX fiber cabling infrastructure.

8/4/2009
Product Data Sheets & Overviews1887 N-TRON306FX2N Data Sheet

This data sheet describes the N-TRON306FX2-N-ST, a compact, unmanaged Ethernet switch with six ports (four copper and two fiber optic), ideal for industrial use.

8/4/2009
Product Data Sheets & Overviews1888 N-TRON308TXN Data Sheet

This data sheet describes the N-TRON308TX-N, a compact and sturdy unmanaged Ethernet switch. It has eight 10/100 BaseTX RJ-45 ports and is well suited for industrial applications.

8/4/2009
Product Data Sheets & Overviews1889 N-TRON508FX2-A-ST-S Data Sheet

This data sheet describes the N-TRON508FX2-A-ST-S, a managed Ethernet switch ideal for industrial applications. This switch has six copper and two fiber optic ports with ST connectors. It's a plug & play unit with advanced management features and a standard temperature rating.

8/4/2009
Product Data Sheets & Overviews1890 N-TRON516TX-A Data Sheet

This data sheet describes the N-TRON516TX-A, a managed Ethernet switch with 16 10/100BaseTX copper ports. This is a plug & play unit with advanced management features, ideal for industrial use.

8/4/2009
Product Data Sheets & Overviews1891 N-TRON517FX-A-ST-S Data Sheet

This data sheet describes the N-TRON517FX-A-ST-S, a managed Ethernet switch with 16 10/100BaseTX copper ports and one 100BaseFX fiber optic port with ST connectors. It has a standard temperature rating. This is a plug & play unit with advanced management features, ideal for industrial use.

8/4/2009
Product Data Sheets & Overviews1878 N-TRON508TX-A Data Sheet

This data sheet describes the N-TRON508TX-A, a highly reliable, managed Ethernet network switch for use in industrial automation. The switch has eight 10/100BaseTX copper ports.

8/4/2009
Product Data Sheets & Overviews1885 N-TRON702W Industrial Ethernet Wireless Device User Manual and Installation Guide

This installation guide shows you how to install and use the N-TRON702-W wireless access point (AP). This access point is highly reliable in industrial settings and is ideal for use with Opto 22 Wired+Wireless controllers and brains.

8/3/2009
Product Data Sheets & Overviews1809 SNAP IO4AB Learning Center Data Sheet
The SNAP IO4AB Learning Center is a fully functioning package of Opto 22 hardware and software designed to help you learn how to configure and use messaging via EtherNet/IP between an Allen-Bradley Controller and Opto 22's intelligent remote SNAP I/O.

4/6/2009
Product Data Sheets & Overviews1047 SNAP LCSX Controllers Data Sheet
The SNAP-LCSX and SNAP-LCSX-PLUS controllers are the cost-effective answer to applications requiring small, powerful, real-time industrial control.
7/10/2008
Product Data Sheets & Overviews1471 SNAP-LCE Data Sheet
The SNAP-LCE, part of Opto 22's SNAP Ethernet Systems family, is a older, standalone, small-footprint, industrial controller designed for use with SNAP Ethernet-based I/O units and ioProject software. It is used primarily in industrial control applications. The SNAP-LCE provides real-time control and is programmed with the included ioControl, a flowchart-based control programming software.

NOTE: The SNAP-LCE and ioProject are not recommended for new development. For new development, use a SNAP PAC controller and PAC Project software.
6/11/2008
Product Data Sheets & Overviews0729 Mistic 16-Channel Digital Brain Board Data Sheet
The B100 is a high-performance digital brain board used to control up to 16 channels of remote digital I/O using Opto 22’s digital I/O mounting racks and modules.
6/10/2008
Product Data Sheets & Overviews0787 SNAP Analog/Digital Mistic/Optomux Brain Data Sheet
The B3000 is a high-performance I/O processor used to remotely control a mix of both analog and digital I/O modules using Opto 22's SNAP I/O B Series I/O mounting racks
3/4/2008
Product Data Sheets & Overviews1055 SNAP High-Speed Analog/Digital Pamux Brain Data Sheet
The SNAP-B6 is a high-speed, addressable brain board that can remotely control a mix of both analog and digital I/O modules using the Pamux protocol.
11/21/2007
Product Data Sheets & Overviews0521 Fiber Optic Datalink Repeater Data Sheet
The AC40 is a fiber optic repeater designed to allow RS-485 communication devices to communicate over a fiber optic data link.
8/24/2007
Product Data Sheets & Overviews1083 SNAP Ethernet Brain Data Sheet
With Opto 22's high-performance, flexible SNAP Ethernet brains, you can connect to state-of-the-art Opto 22 industrial I/O hardware using a standard TCP/IP Ethernet connection.
8/6/2007
Product Data Sheets & Overviews1452 SNAP Simple Brain Data Sheet
NOTE: Although still fully supported and in production, the SNAP Simple brain is not recommended for new development. We recommend the SNAP-PAC-EB2 brain instead.

Opto 22 SNAP Simple I/O™ is a low-cost solution that offers Ethernet/TCP communications as well as analog, simple digital, and serial capability on the same mounting rack. Used for high-density commercial and industrial applications and for remote monitoring applications with high I/O point counts, a SNAP Simple I/O unit consists of a SNAP-ENET-S64 brain mounted on a SNAP M-series rack with standard SNAP I/O™ analog, digital, and serial modules.
7/23/2007
Product Data Sheets & Overviews1473 ioProject Software Suite Data Sheet
This data sheet describes Opto 22's legacy ioProject software suite, which provides control and HMI development tools for a SNAP Ethernet-based control system. The ioProject suite includes ioControl, ioDisplay, OptoOPCServer, and ioManager.

NOTE: For new development, we recommend the PAC Project software suite instead.
7/23/2007
Product Data Sheets & Overviews0675 M4RTU Data Sheet
The Modular M4RTU Controller features powerful communications capabilities, built-in diagnostics, and 32-bit processors.
7/12/2007
Product Data Sheets & Overviews0664 M4 Controllers Serial Adapter Card Data Sheet
The M4SSER expands the number of serial ports on the M4 Modular Controllers from two to four.
1/4/2007
Product Data Sheets & Overviews0588 Low Cost, High Performance Mistic 200 Controller Data Sheet
The G4LC32SX is a cost effective, high performance controller designed to work within the Opto 22 family of rugged, compact controllers and I/O units.
11/15/2006
Product Data Sheets & Overviews0043 Optomux Half-Duplex Modem Adapter Card Data Sheet
The AC8 adapter card is a communications interface board that provides bi-directional RS-232 to half duplex RS-485/422 conversion, allowing half-duplex modems to be use with the Optomux network.
10/30/2006
Product Data Sheets & Overviews1109 SNAP Profibus Brain Data Sheet
With the SNAP Profibus-DP brain, you can use state-of-the-art Opto 22 digital I/O hardware with your existing Profibus DP-compatible controller.
10/16/2006
Product Data Sheets & Overviews1340 OptoTerminal Data Sheet
Opto 22's OptoTerminal family brings a programmable, Ethernet-enabled, graphics-based operator interface to any location with Opto 22 SNAP Ethernet I/O, SNAP Ultimate I/O, or SNAP-IT systems. Operators can use these mountable display terminals to send commands to and receive real-time data from plant floor equipment and other devices connected to Opto 22 hardware.
7/19/2006
Product Data Sheets & Overviews1519 PCI-AC48 Adapter Card
The PCI-AC48 is an isolated, high-speed adapter card designed to link RS-485 serial devices, such as Opto 22's B3000 brains, with computers using the Peripheral Component Interconnect (PCI) bus. This adapter card is ideal for customers who have been using Opto 22's AC37 adapter card, but must upgrade to a newer computer that uses the PCI bus instead of the ISA bus.
7/18/2006
Product Data Sheets & Overviews0374 G4 Digital Switch Modules Data Sheet
G4 digital switch modules are used to simulate an input on an I/O mounting rack (G4SWIN) or an output from a G4 module (G4SWOUT). These modules are ideal for testing application software and field wiring. Each module contains a manual toggle switch. The G4SWIN's switch closes a contact on the logic side of the module; the G4SWOUT's switch is on the field side.
7/5/2006
Product Data Sheets & Overviews1551 SNAP DNP I/O
SNAP DNP I/O from Opto 22 is a DNP slave hardware device for use with DNP3-based SCADA systems. A low-cost alternative to remote telemetry units (RTUs), SNAP DNP I/O systems provide a non-proprietary, standards-based way to bring critical utility assets under the scope of a DNP3 SCADA network.
6/9/2006
Product Data Sheets & Overviews0510 Standard Digital 4-Channel Rack Data Sheet
The PB4 I/O mounting rack is designed for use with standard single channel I/O modules in applications which require barrier strips on both the field and the logic sides.
5/19/2006
Product Data Sheets & Overviews0477 Standard Digital 4-Channel (with header connector) Rack Data Sheet
The PB4H I/O mounting rack features a 50-pin header connector for easy interface to computer I/O ports via 50-conductor ribbon cables.
1/18/2006
Product Data Sheets & Overviews1200 PCI-AC28 Adapter Card Data Sheet

PCI-AC28 is an obsolete product as of 1-18-05.

This document is provided for reference only.

1/6/2006
Product Data Sheets & Overviews0682 Analog Expansion Brick - Instructions
Opto 22 G4LAX and G4RAX analog expansion bricks each allow up to eight additional Opto 22 G4 analog I/O modules to be used with Opto 22 G4A8L and G4A8R analog bricks. The G4LAX expansion brick is used with the local G4A8L analog brick, and the G4RAX expansion brick is used with the remote G4A8R analog brick.
10/11/2005
Product Data Sheets & Overviews0601 G4 Analog Voltage Input 0-100 Volt AC/DC Module Data Sheet
The G4AD25 module provides a single channel of transformer and optically-isolated analog-to-digital conversion.
8/9/2005
Product Data Sheets & Overviews0582 G4 Rate Input Module Data Sheet
The G4AD20 module provides a single channel of transformer and optically-isolated analog to digital conversion.
8/9/2005
Product Data Sheets & Overviews0646 G4 Analog Rate Input Module Data Sheet
The G4AD26 module provides a single channel of transformer and optically-isolated analog-to-digital conversion.
8/9/2005
Product Data Sheets & Overviews0426 G4 Analog 4-20 Milliamp Input Module Data Sheet
The G4AD3 module provides a single channel of transformer and optically isolated current-to-digital conversion.
8/9/2005
Product Data Sheets & Overviews0427 G4 Analog RTD Input Module Data Sheet
The G4AD10 module provides a single channel of optically-isolated temperature-to-digital conversion.
8/9/2005
Product Data Sheets & Overviews0428 G4 Analog 0-5 Amp, AC/DC Current Module Data Sheet
The G4AD16 module provides a single channel of optically-isolated true RMS current-to-digital conversion.
8/9/2005
Product Data Sheets & Overviews0422 G4 Analog Thermocouple Input Modules Data Sheet
Thermocouple analog modules provide a single channel of transformer and optically- isolated temperature-to-digital conversion.
8/9/2005
Product Data Sheets & Overviews0423 G4 Analog Voltage Input Modules Data Sheet
Opto 22’s voltage input modules provide a single channel of transformer and optically- isolated voltage-to-digital conversion.
8/9/2005
Product Data Sheets & Overviews0737 B4 Digital Brain Board Data Sheet and Installation Notes
This document describes how to install the B4 digital I/O brain board on a compatible mounting rack.
8/1/2005
Product Data Sheets & Overviews0738 B5 Digital Brain Board Data Sheet and Installation Notes
The Pamux B5 is an addressable digital brain board that can control up to 16 input or output points in distributed I/O applications. The B5 is designed for use with a variety of Opto 22 I/O mounting racks, including racks that accept single-point digital I/O or quad pak digital I/O as well as racks with integrated digital I/O circuitry.
8/1/2005
Product Data Sheets & Overviews0730 Mistic 16-Channel Analog Brain Board Data Sheet
The B200 is a high-performance analog brain board used to control up to 16 channels of remote analog I/O using Opto 22’s Classic analog I/O mounting racks and modules.
7/28/2005
Product Data Sheets & Overviews1579 E1 and E2 Product Overview
E1 and E2 brain boards add powerful networking, software, and protocol options to existing Optomux systems. As drop-in replacements for existing B1 and B2 brain boards, E1s and E2s not only continue to run Optomux applications over serial, but also can communicate using Modbus/TCP, OPC, Optomux, and Opto 22's memory-mapped OptoMMP protocol over Ethernet.
7/19/2005
Product Data Sheets & Overviews0812 M4 Modular Controller Data Sheet
The Modular M4 Controller features powerful communications capabilities, built-in diagnostics, and 32-bit processors. Modular controllers are designed to work with Opto 22’s Windows 32-bit FactoryFloor software suite.
7/12/2005
Product Data Sheets & Overviews0478 Standard Digital 8-Channel Rack Data Sheet
The PB8H I/O mounting rack can accommodate up to eight standard single channel I/O modules in any combination.
5/16/2005
Product Data Sheets & Overviews0680 RAM & EPROM Memory Expansion Options Data Sheet
Tables and other information for selecting RAM and EPROM expansion options for controllers.
4/5/2005
Product Data Sheets & Overviews1558 SNAP-DNP-ASDS DNP3 Profile
This document lists the DNP3 requirements met by the SNAP-DNP-ASDS brain.
2/25/2005
Product Data Sheets & Overviews0955 SNAP High-Speed Digital Brain Board Data Sheet
The SNAP-B4 is a high-performance digital I/O processor used to connect and control up to 32 channels of digital I/O using Opto 22's SNAP B-Series I/O mounting racks and the Pamux bus.
2/21/2005
Product Data Sheets & Overviews0956 SNAP Remote Digital Brain Board Data Sheet
The SNAP-BRS brain board is a high-performance digital I/O processor used to remotely control up to 32 digital I/O modules using Opto 22's SNAP B-Series I/O mounting racks.
2/21/2005
Product Data Sheets & Overviews1000 SNAP 32-Channel ARCNET Brain Board Data Sheet
The SNAP-B3000-HA processor is used to remotely control a mix of both analog and digital I/O modules using Opto 22's SNAP B-Series I/O mounting racks.
2/21/2005
Product Data Sheets & Overviews1001 SNAP 32-Channel Digital ARCNET Brain Board Data Sheet
The SNAP-BRS-HA brain board is a high-performance digital I/O processor used to remotely control up to 32 digital I/O modules using Opto 22's SNAP B Series I/O mounting racks and can be used with either an Opto 22 controller or a host computer.
2/21/2005
Product Data Sheets & Overviews1076 FactoryFloor Software Data Sheet
FactoryFloor is a suite of industrial control software programs offering an unprecedented level of price and performance to PC-based automation users.
1/14/2005
Product Data Sheets & Overviews1496 OptoGSM I/O
OptoGSM I/O from Opto 22 integrates standard GSM/GPRS mobile networks and proven Opto 22 input/output (I/O) technology to provide a low-cost, flexible solution for remote monitoring and control. Integrated components (purchased separately) include the G4-SE-4A8D I/O rack, Sony Ericsson GT47 or GT48 remote communications unit, and industry-standard Opto 22 G4 digital I/O modules.
1/4/2005
Product Data Sheets & Overviews1419 SNAP N-Series Racks Data Sheet
N-Series racks are specially designed to accomodate a remote communication adapter for use with cellular modems, dial-up modems, or other wireless WAN radios. These racks are ideal for applications involving the wireless monitoring and control of analog, digital, and serial business assets.
12/16/2004
Product Data Sheets & Overviews0796 SNAP Racks Assembly Instructions
This legacy document describes how to install a legacy rack extrusion and how to install or remove a circuit board. It includes a list of SNAP rack accessories.
12/16/2004
Product Data Sheets & Overviews1296 ioDisplay Data Sheet
Part of the ioProject software suite, ioDisplay is an intuitive HMI software package used to build operator interfaces for your Microsoft Windows-based clients communicating with Opto 22 Ethernet systems.
9/28/2004
Product Data Sheets & Overviews0485 Quad Pak AC Input Modules Data Sheet
Quad Pak modules contain the equivalent of four single-channel I/O circuits in a single high-density package.
9/27/2004
Product Data Sheets & Overviews0487 Quad Pak DC Input Module Data Sheet
Quad Pak modules contain the equivalent of four single-channel I/O circuits in a single high-density package.
9/27/2004
Product Data Sheets & Overviews0247 G4 Digital 4-Channel Mounting Rack Data Sheet
The G4PB4 I/O mounting rack compactly accommodates up to four G4 I/O modules secured by a threaded captive hold-down screw.
9/24/2004
Product Data Sheets & Overviews0741 AC28 Installation Notes
This document describes how to install the AC28 adapter card.
9/17/2004
Product Data Sheets & Overviews1504 Nvio Starter Kit
The Nvio Starter Kit from Opto 22 provides in one turn-key system all the elements needed to monitor and manage remote devices so you can quickly evaluate or implement a machine-to-machine (M2M) application.
9/8/2004
Product Data Sheets & Overviews0672 Power Supplies for M4 Controllers Data Sheet
There are six models of input power supplies available for any Modular controller.
8/27/2004
Product Data Sheets & Overviews0631 M4 ARCNET Adapter Card Data Sheet
The M4SARC is a coaxial cable network interface card for Opto 22 M4BUS Modular controllers.
8/23/2004
Product Data Sheets & Overviews0248 G4 Digital 8-Channel Mounting Rack Data Sheet
The G4PB8 I/O mounting rack accommodates up to eight G4 I/O modules secured by a threaded captive hold-down screw.
8/23/2004
Product Data Sheets & Overviews0249 G4 Digital 4-Channel Outputs Mounting Rack Data Sheet
The G4PB4R output mounting rack accommodates up to four G4 output modules and features channel-to-channel isolation between all field and control circuits.
8/23/2004
Product Data Sheets & Overviews0246 G4 Digital 16-Channel Mounting Rack Data Sheet
The G4PB16 I/O mounting rack accommodates up to 16 G4 I/O modules secured by a threaded captive hold-down screw.
8/23/2004
Product Data Sheets & Overviews1154 M4 Controller Ethernet Card Data Sheet
The M4SENET-100 is an Ethernet network interface card designed for Opto 22's M4 series controllers, such as the SNAP-LCM4 and the M4RTU.
8/19/2004
Product Data Sheets & Overviews1373 SNAP-IT-1U Data Sheet
SNAP-IT-1U is a packaged solution to monitor, control, or acquire data from virtually any electrical, mechanical, or electronic device over a standard TCP/IP Ethernet network. Designed to mount on a standard 19-inch rack, SNAP-IT-1U comes with a SNAP Ethernet brain or with a SNAP Ultimate brain for applications requiring programming capability.
8/13/2004
Product Data Sheets & Overviews0515 Standard Digital 24-Channel Rack Data Sheet
The PB24 I/O mounting rack can accommodate up to 24 single-channel standard I/O modules.
5/6/2004
Product Data Sheets & Overviews1320 D64 Capture Firmware Data Sheet
Opto 22's high-speed D64 Capture Firmware gives an Opto 22 digital-only SNAP Ethernet I/O system or SNAP-IT unit the ability to capture on/off transitions, log transition data, and send the log to a PC or other host via standard 10/100 Mbps Ethernet. A typical application is monitoring sequential shutdown of power generation equipment to determine the source of a problem.
4/1/2004
Product Data Sheets & Overviews1455 M2M Solution Paper: Quick-Serve Restaurants
This paper describes M2M solutions in the area of quick-serve restaurants. It covers the monitoring and management of the restaurants' operations and equipment---using existing enterprise software---with M2M technology from Opto 22.
9/8/2003
Product Data Sheets & Overviews0466 RS232 to RS422/485 Converter Data Sheet
The AC7 is a stand-alone adapter card that converts RS-232 serial communication to RS-422 serial communication, which is directly compatible with the Optomux family of intelligent brain boards.
6/13/2003
Product Data Sheets & Overviews0700 Mistic 32-Channel Digital I/O Brick Data Sheet
The G4D32RS is a low-cost, high-I/O-capacity digital unit for the Opto 22 family of PC-based control products.
6/13/2003
Product Data Sheets & Overviews0511 Standard Digital 8-Channel Rack Data Sheet
The PB8 I/O mounting rack accommodates up to eight standard single channel I/O modules.
1/3/2003
Product Data Sheets & Overviews0469 RS422/RS485 Multidrop Repeater Data Sheet
The AC30A and AC30B adapter cards provide the ability to extend a multidrop RS-485 communications link beyond 5,000 feet and also allow branching from an RS-422/RS-485 link.
10/29/2002
Product Data Sheets & Overviews0990 Dual Twisted-pair ARCNET Interface Card Data Sheet
The M4DUALARC is a twisted-pair ARCNET network interface card for Opto 22 M4BUS Modular controllers.
11/7/2001
Product Data Sheets & Overviews0470 Addressable RS232-RS485 Interface Data Sheet
The AC31 adapter card is a general purpose addressable interface that allows any slave serial device that uses asynchronous serial communications (terminals, printers, barcode readers, etc.) to be addressed and attached to a multidrop network.
10/29/2001
Product Data Sheets & Overviews0363 G4 Digital 32-Channel (for DEC Computers) Rack Data Sheet
The G4PB32DEC I/O mounting rack accommodates up to 32 G4 digital I/O modules and is used to interface to a DEC computer DRV-11J parallel card.
5/1/2001
Product Data Sheets & Overviews0673 M4 ARCNET Fiber Optic/Repeater Data Sheet
The M4SARCF and M4SARCFR are fiber optic network interface cards for Opto 22 Modular controllers.
4/12/2001
Product Data Sheets & Overviews0662 G4LC32SX ARCNET Adapter Card
Directions for installing the G4LC32ARC adapter card.
4/6/2001
Product Data Sheets & Overviews0748 UCA4 Adapter Card Intallation Guide
4/5/2001
Product Data Sheets & Overviews0040 Standard 4-Channel Digital Switch Assembly Data Sheet
The PB4MOA is a four-channel digital switch assembly that connects directly to the barrier strip of any standard Opto 22 I/O mounting rack.
2/8/2001
Product Data Sheets & Overviews0390 G4 Digital 16-Channel (with header, common TB) Rack Data Sheet
The G4PB16HC I/O mounting rack accommodates up to 16 G4 I/O modules and features an extra row of terminals for field loop power connections.
2/6/2001
Product Data Sheets & Overviews0424 G4 Analog Voltage DC Output Modules Data Sheet
G4 analog voltage output modules provide a single channel of transformer and optically isolated digital to voltage conversion.
2/6/2001
Product Data Sheets & Overviews0425 G4 Current Loop Output Modules Data Sheet
Opto 22's current loop output modules provide a single channel of transformer and optically-isolated digital-to-current conversion for 0-20 mA and 4-20 mA current loops.
2/6/2001
Product Data Sheets & Overviews0431 Single Brick Terminal Adapter Data Sheet
The SBTA is used in remote systems to connect standard twisted pair communications cable to bricks not mounted on Mistic panels.
2/5/2001
Product Data Sheets & Overviews0454 Standard Digital Input Test Module Data Sheet
The input test module is a device that simulates an input on an I/O mounting rack ideal for simulating external discrete events in order to test the application software.
2/1/2001
Product Data Sheets & Overviews0455 Standard Digital Output Test Module Data Sheet
The output test module is a device that provides a manual toggle switch on the field side ideal for testing field wiring and field devices by simulating an output from the computer.
2/1/2001
Product Data Sheets & Overviews0456 Standard 16-Channel (with header, common TB) Rack Data Sheet
The PB16HC I/O mounting rack can accommodate up to 16 single-channel digital I/O modules.
2/1/2001
Product Data Sheets & Overviews0473 ISA Bus RS-422/485, Non-Isolated Adapter Card Data Sheet
The AC422AT is a non-isolated RS-422/485 adapter card that plugs directly into the IBM PC bus.
1/31/2001
Product Data Sheets & Overviews0475 LC4-family Single-board Controller Data Sheet
The LC4 family of controllers provides powerful, low-cost, single-board computers which perform the function of a local controller on a Pamux or Optomux network. LC4 controllers are available with onboard AC (model LC4A) or DC (model LC4B) power. Also available is the LC4DC controller, which requires a 10-28 VDC power source.
1/31/2001
Product Data Sheets & Overviews0468 ISA Bus RS-422/485 (with Isolation) Adapter Card Data Sheet
The AC24AT is an RS-422/485 adapter card that plugs directly into the IBM PC bus and provides up to 4,000 VAC isolation between the PC bus and the communications link.
1/31/2001
Product Data Sheets & Overviews0509 Standard Digital 4-Channel Outputs-Only Rack Data Sheet
The PB4R output mounting rack is designed for use with standard single channel output modules only, and features isolation between channels.
1/31/2001
Product Data Sheets & Overviews0498 Standard Rate Input Module Data Sheet
The AD20 module provides a single channel of frequency-to-digital conversion with 4,000 V rms transient isolation.
1/31/2001
Product Data Sheets & Overviews0493 Strap2Q and Strap4Q Jumper Straps Data Sheet
Jumper straps are available for applications which require that one line of each I/O module position be a common.
1/31/2001
Product Data Sheets & Overviews0479 Quad Pak Digital 16-Channel Rack Data Sheet
The PB16HQ I/O mounting rack can accommodate up to four Quad Pak I/O modules for a total of 16 I/O channels.
1/31/2001
Product Data Sheets & Overviews0482 Standard 4-Channel Analog Mounting Rack Data Sheet
The PB4AH I/O mounting rack can accommodate up to four standard analog I/O modules in any combination.
1/31/2001
Product Data Sheets & Overviews0483 Standard 8-Channel Analog Mounting Rack Data Sheet
The PB8AH I/O mounting rack can accommodate up to eight standard analog I/O modules in any combination.
1/31/2001
Product Data Sheets & Overviews0513 Standard Digital 16-Channel (with extra terminal strip) Rack Data Sheet
The PB16C I/O mounting rack can accommodate up to 16 single-channel standard I/O modules.
1/30/2001
Product Data Sheets & Overviews0514 Standard Digital 16-Channel (with Barrier Strips) Rack Data Sheet
The PB16T I/O mounting rack accommodates up to 16 single-channel standard I/O modules.
1/30/2001
Product Data Sheets & Overviews0534 Mistic 200 Remote Communication Kit Data Sheet
The G4RCOMMKIT is a collection of communication components used by remote Bricks and is only needed when Opto 22 mounting panels are not being used.
1/30/2001
Product Data Sheets & Overviews0535 Brick Jumper Strap Data Sheet
The BRICKSTRAP is a metal connecting device with epoxy coating on one edge to prevent accidental shorting with other wiring connections.
1/30/2001
Product Data Sheets & Overviews0537 AC37 High-Speed ISA Bus to Remote Bus Adapter Card Data Sheet
The AC37 is an isolated, high-speed serial interface for AT-class IBM-compatible computers and is compatible with all Opto 22 16-bit and 32-bit software and hardware.
1/30/2001
Product Data Sheets & Overviews0538 AC42 ISA Bus Fiber Optic Serial Interface Data Sheet
The AC42 is a fiber optic serial communications interface for ISA Bus PCs and compatible computers.
1/30/2001
Product Data Sheets & Overviews0539 AC39 ISA Bus to Local I/O Bus Interface Data Sheet
The AC39 is a high-speed Model 200 Local Bus interface for AT class IBM compatible computers.
1/30/2001
Product Data Sheets & Overviews0570 G4 Analog TPO Modules Data Sheet
The G4DA9 and G4DA10 time proportional output (TPO) modules provide digital control from a Mistic Analog brick or Modular controller.
1/30/2001
Product Data Sheets & Overviews0620 16-Channel High-Res, Voltage/Current Input Card Data Sheet
The G4AIVA Voltage/Current Input Interface Card is designed to be used with the Opto 22 high-density analog line of Mistic 200 bricks.
1/29/2001
Product Data Sheets & Overviews0663 G4LC32SX Serial Adapter Card Data Sheet
The G4LC32SER daughter card provides the controller’s COM0 and COM1, RS-232 or RS-422/485 serial ports.
1/29/2001
Product Data Sheets & Overviews0634 ISA Bus Mistic 200 Controller Data Sheet
The G4LC32ISA Controller is a high performance real-time controller designed to work within the Opto 22 family of processors and I/O control units.
1/29/2001
Product Data Sheets & Overviews0639 High Performance, Real-Time Mistic 200 Controller
The G4LC32 Controller is a high-performance real-time industrial microcomputer designed to work within the Opto 22 family of rugged and compact controllers and I/O units.
1/29/2001
Product Data Sheets & Overviews0640 Mistic Digital I/O Brick
The G4D16R is a high-performance digital I/O brick for Opto 22 processors and I/O.
1/29/2001
Product Data Sheets & Overviews0644 ISA Serial Adapter (for G4LC32ISA) Data Sheet
The G4LC32ISASER is a serial communication daughter card for the G4LC32ISA.
1/29/2001
Product Data Sheets & Overviews0645 ISA ARCNET Adapter for G4LC32ISA
The G4LC32ISAARC is an ARCNET daughter card for the G4LC32ISA.
1/29/2001
Product Data Sheets & Overviews0670 Mistic Analog I/O Brick Data Sheet
The G4A8R is a high performance analog I/O brick for the Opto 22 family of processors and I/O.
1/26/2001
Product Data Sheets & Overviews0671 M4 Controllers I/O Extender Data Sheet
The M4RTUX I/O extender is an I/O expansion option for the M4RTU that adds eight G4 digital and four G4 analog I/O channels.
1/26/2001
Product Data Sheets & Overviews0734 Low-Cost ISA Bus Controller Data Sheet
The G4LC32ISA-LT (ISA Lite) is a low-cost, general purpose, industrial microcomputer that is mounted on a standard IBM PC ISA bus card.
1/26/2001
Product Data Sheets & Overviews1002 AC47 Interface Card Data Sheet
The AC47 is an obsolete twisted-pair ARCNET network interface card for IBM PCs and compatibles using the ISA bus. The product is no longer available. This data sheet is provided for reference only.
1/26/2001
Product Data Sheets & Overviews0960 AC7A/B Adapter Card Data Sheet
The AC7A/B is a stand-alone adapter card that converts RS-232 serial communication to RS-422/485 serial communication, which is directly compatible with the Optomux family of intelligent brain boards.
1/26/2001
Product Data Sheets & Overviews0914 OptoIntegration Toolkit for Modbus Data Sheet
The OptoIntegration Kit for Modbus allows Opto 22 controllers using OptoControl to communicate via a serial port as a master or slave using either the Modbus ASCII or RTU protocol.
1/26/2001
Product Data Sheets & Overviews0759 DeviceNet 16-Channel Digital Brain Board Data Sheet
The BD-DEVNET is a 16-channel digital DeviceNet-compatible brain board that allows DeviceNet customers to utilize Opto 22 digital I/O mounting racks on the DeviceNet communication and power network.
1/22/2001
Product Data Sheets & Overviews0527 Quad Pak 24-Channel (with header connector) Rack Data Sheet
The PB24HQ I/O mounting rack can accommodate up to six Quad Pak I/O modules for a total of 24 I/O channels.
1/22/2001
Product Data Sheets & Overviews0528 Quad Pak Digital 24-Channel Mounting Rack Data Sheet
The PB24Q I/O mounting rack can accommodate up to six Quad Pak I/O modules for a total of 24 I/O channels.
1/22/2001
Product Data Sheets & Overviews0742 G4 Digital 16-Channel DC Output Integral Rack Data Sheet
The G4PB16L DC output rack provides 16 channels of optically-isolated outputs for controlling or switching small DC loads by a B1, B5, or B100 brain board, or any ISA bus-compatible computer with an Opto 22 G4AC5 adapter card.
1/19/2001
Product Data Sheets & Overviews0732 G4 Digital 16-Channel DC Input Integral Rack Data Sheet
The G4PB16J and G4PB16K DC input racks provide 16 channels of optically-isolated inputs for sensing on/off DC voltage levels by a B1, B5, or B100 brain board, or any ISA bus-compatible computer with an Opto 22 G4AC5 adapter card.
1/19/2001
Product Data Sheets & Overviews0628 Analog Brick Brain Board
The G4A8L is a high performance analog I/O brick for the Opto 22 family of processors and I/O.
9/5/1997

My.Opto22

All Opto22

Request Information
  • FREE Product Brochure
  • Product Demonstration
  • PreSales Engineering Assistance

Opto 22 Product Support

Opto 22 Product Support is FREE Monday through Friday 7 a.m. to 5 p.m. Pacific Time

Product Support Numbers:

Local: (951) 695-3080
Toll-Free: (800) 835-6786
Fax: (951) 695-3017
support@opto22.com

Products

None

Downloads

None

Documents

None