Opto 22

43044 Business Park Drive, Temecula, CA 92590 USA
Local & outside the USA:(951) 695-3000
Toll-Free within the USA:(800) 321-6786
Fax: (951) 695-3095
Email: sales@opto22.com

SNAP Reed Relay Modules Data Sheet


Filename: 1949_SNAP_Reed_Relay_Modules_Data_Sheet.pdf
File Size: 378 KB
Last Update: 9/20/2016

Description:

The SNAP Reed Relay modules use reed relays and do not provide optical isolation. Current rating depends on the voltage the module is used with. These modules were designed for a very low-voltage DC load that is purely resistive (no inrush current). Because of their low 10 VA rating, these modules cannot be used with inductive or capacitive loads (even very small loads) nor 120 VAC.

NOTE: For many applications a better choice is one of the SNAP-OMR6 series modules, which can handle a full 6 A at 0-250 VAC or 0-30 VDC.

Notes:

My.Opto22

All Opto22

Request Information
  • FREE Product Brochure
  • Product Demonstration
  • PreSales Engineering Assistance

Opto 22 Product Support

Opto 22 Product Support is FREE Monday through Friday 7 a.m. to 5 p.m. Pacific Time

Product Support Numbers:

Local: (951) 695-3080
Toll-Free: (800) 835-6786
Fax: (951) 695-3017
support@opto22.com

Products

None

Downloads

None

Documents

None