Opto 22

43044 Business Park Drive, Temecula, CA 92590 USA
Local & outside the USA:(951) 695-3000
Toll-Free within the USA:(800) 321-6786
Fax: (951) 695-3095
Email: sales@opto22.com

All Opto 22 industrial control and automation software and firmware can be downloaded at any time. While most software is free, some software must be purchased and will require an OptoPassword to install.
> If I bought software and a new version is released, can I get the upgrade for free?
> For more sample files, see the OptoForum.
> Looking for groov files? Go to groov.com/use-groov.

Search Downloads:

Filter by:
   What are these?
CategoryDescription/File NameVersionDate
Drawings CAD 3D Drawing: SNAP-TEX-DRC10 DIN-Rail Adapter Clips
CAD 3D Drawing: SNAP-TEX-DRC10 Adapter Clips
This CAD file contains a 3-dimensional drawing of the SNAP-TEX-DRC10 DIN-rail adapter clips for mounting a SNAP PAC rack or breakout board on a DIN rail. For use with either narrow or wide end caps.
 03/24/2016
Drawings CAD 3D Drawing: SNAP-PAC-R1 Rack-mounted Controller
CAD 3D Drawing: SNAP-PAC-R1 Controller

This CAD file contains a 3-dimensional drawing of the SNAP-PAC-R1 rack-mounted programmable automation controller with high-speed digital functions. This drawing also applies to the SNAP-PAC-R1-FM, which is Factory Mutual approved.

 02/12/2016
Drawings CAD 3D Drawing: SNAP-SCM-232 Serial Communication Module
CAD 3D Drawing: SNAP-SCM-232 Module

This CAD file contains a 3-dimensional drawing of the SNAP-SCM-232 serial communication module, which provides two channels of high-speed serial data.

2.011/06/2015
Drawings CAD 3D Drawing: SNAP-PAC-RCK4 Mounting Rack
CAD 3D Drawing: SNAP-PAC-RCK4 Rack

This CAD file contains a 3-dimensional drawing of the SNAP-PAC-RCK4 mounting rack, which holds a SNAP PAC I/O processor (brain or rack-mounted controller) plus up to four analog, digital, or serial I/O modules. This drawing also applies to the SNAP-PAC-RCK4-FM, which is Factory Mutual approved.

 10/08/2014
Drawings CAD 3D Drawing: GROOV-AR1 groov Box
CAD 3D Drawing: GROOV-AR1

This CAD file includes drawings for the GROOV-AR1 groov Box. With the groov Box you can easily build and view mobile operator interfaces for almost any automation system. For more information, visit groov.com.

These drawings also apply to the GROOV-AR1-SNAP.

1.008/13/2014
Drawings CAD 3D Drawing: SNAP-PS5-24DC Power Supply
CAD 3D Drawing: SNAP-PS5-24DC Power Supply

This CAD file includes drawings for the SNAP-PS5-24DC power supply. This DC-to-DC power supply requires a 24 VDC input and provides 5 VDC power for a SNAP PAC rack with SNAP PAC controller or brain and SNAP I/O modules. It is ideal for systems using DC backup power.

1.005/27/2014
Drawings CAD 3D Drawing: SNAP-OMR6-C Mechanical Relay Output Module
CAD 3D Drawing: SNAP-OMR6-C Mechanical Power Relay Output Module

This CAD file contains a 3-dimensional drawing of the SNAP-OMR6-C mechanical power relay output module, which provides four channels of switching for up to 250 VAC or 30 VDC, 6 amp loads. Each of the four mechanical contacts can be used as normally open or normally closed.

1.001/24/2014
Drawings CAD 3D Drawing: SNAP-IDC-32 Digital Input Module
CAD 3D Drawing: SNAP-IDC-32 Module

This CAD file contains a 3-dimensional drawing of the SNAP-IDC-32 digital input module, which provides 32 channels of 10-32 VDC input. This drawing also applies to the SNAP-IDC-32-FM, which is Factory Mutual approved.

 12/02/2013
Drawings CAD 3D Drawing: SNAP-ODC-32-SRC Digital Output Module
CAD 3D Drawing: SNAP-ODC-32-SRC Module

This CAD file contains a 3-dimensional drawing of the SNAP-ODC-32 32-channel digital input and output modules. The drawing applies to the following modules:
- SNAP-ODC-32-SRC digital output module (load sourcing)
- SNAP-ODC-32-SRC-FM digital output module (load sourcing), Factory Mutual approved.
- SNAP-ODC-32-SNK digital output module (load sinking)
- SNAP-ODC-32-SNK-FM digital output module (load sinking), Factory Mutual approved.

 12/02/2013
Drawings CAD 3D Drawing: SNAP-PAC-RCK16 Mounting Rack
CAD 3D Drawing: SNAP-PAC-RCK16 Mounting Rack

This CAD file contains a 3-dimensional drawing of the SNAP-PAC-RCK16 mounting rack, which holds a SNAP PAC I/O processor (brain or rack-mounted controller) plus up to 16 analog, digital, or serial I/O modules. This drawing also applies to the SNAP-PAC-RCK16-FM, which is Factory Mutual approved.

 10/01/2013
Drawings CAD Drawing: GROOV-AT1
CAD Drawing: GROOV-AT1

This CAD file contains a two-dimensional drawing of the GROOV-AT1 groov Box, which contains all groov software. With groov, you can easily build effective operator interfaces for your control system and view them on any device with a modern web browser—computers, tablets, smartphones, even an HDTV—any screen size, any manufacturer.

For more information, visit groov.com.

 05/02/2013
Drawings CAD 3D Drawing: GROOV-AT1
CAD 3D Drawing: GROOV-AT1

This CAD file contains a 3-dimensional drawing of the GROOV-AT1 groov Box, which contains all groov software. With groov, you can easily build effective operator interfaces for your control system and view them on any device with a modern web browser—computers, tablets, smartphones, even an HDTV—any screen size, any manufacturer.

For more information, visit groov.com.

 04/30/2013
Drawings CAD 3D Drawing: SNAP-IDC5Q Digital Input Module
CAD 3D Drawing: SNAP-IDC5Q Module

This CAD file contains a 3-dimensional drawing of the SNAP-IDC5Q digital input module, which allows a SNAP brain to resolve two axes of rotating position information from quadrature encoder devices.

 10/09/2012
Drawings CAD 3D Drawing: SNAP-IDC5-FAST Digital Input Module
CAD 3D Drawing: SNAP-IDC5FAST Module

This CAD file contains a 3-dimensional drawing of the SNAP-IDC5-FAST digital input module, which provides four channels of high-speed 2.5-16 VDC digital input.

 10/08/2012
Drawings CAD 3D Drawing: SNAP-ODC5A-I Digital Output Module
CAD 3D Drawing: SNAP-ODC5A-I Module

This CAD file contains a 3-dimensional drawing of the SNAP-ODC5A-I digital output module, which provides four isolated channels of 5-200 VDC digital output, each switching a separate DC load. This drawing also applies to the SNAP-ODC5A-I-FM, which is Factory Mutual approved.

 10/08/2012
Drawings CAD 3D Drawing: SNAP-PAC-RCK8 Mounting Rack
CAD 3D Drawing: SNAP-PAC-RCK8 Mounting Rack

This CAD file contains a 3-dimensional drawing of the SNAP-PAC-RCK8 mounting rack, which holds a SNAP PAC I/O processor (brain or rack-mounted controller) plus up to eight analog, digital, or serial I/O modules. This drawing also applies to the SNAP-PAC-RCK8-FM, which is Factory Mutual approved.

 10/08/2012
Drawings CAD 3D Drawing: SNAP-PAC-EB1 Ethernet Brain
CAD 3D Drawing: SNAP-PAC-EB1 Brain

This CAD file contains a 3-dimensional drawing of the SNAP-PAC-EB1 Ethernet brain, which provides I/O processing and communications for SNAP I/O. This drawing also applies to the SNAP-PAC-EB1-FM, which is Factory Mutual approved.

 08/02/2012
Drawings CAD 3D Drawing: SNAP-PS5 Power Supply
CAD 3D Drawing: SNAP-PS5 Power Supply

This CAD file contains a 3-dimensional drawing of the SNAP-PS5 power supply, which provides 5 VDC power for loads up to 4 amps.

 08/02/2012
Drawings CAD 3D Drawing: SNAP-PS24 Power Supply
CAD 3D Drawing: SNAP-PS24 Power Supply

This CAD file contains a 3-dimensional drawing of the SNAP-PS24 power supply, which provides 24 volts (0.75 amps) of DC power and requires a 120 VAC input.

 08/02/2012
Drawings CAD 3D Drawing: SNAP-PAC-EB2 Ethernet Brain
CAD 3D Drawing: SNAP-PAC-EB2 Brain

This CAD file contains a 3-dimensional drawing of the SNAP-PAC-EB2 Ethernet brain, which provides I/O processing and communications. This drawing also applies to the SNAP-PAC-EB2-FM, which is Factory Mutual approved.

 08/02/2012
Drawings SNAP PAC angled front view images for Visio 2003
Opto_Snap_PAC_Visio_Angled_Front_Images
Visio stencil library of SNAP PAC system components for Visio 2003. Images are shown in a front view and angled position, as though the hardware were placed on a wall. Library includes left and right views.
307/03/2012
Drawings Opto 22 Visio Stencil Library of HMI Images
Visio stencil library of HMI images

Visio stencil library of graphics suitable for use in a human-machine interface (HMI) or in application diagrams. Images include a variety of small and large items such as arrows, pumps, valves, compressors, tanks, gauges, etc. Use with Visio 2003.

3.007/03/2012
Drawings SNAP PAC upright images for Visio 2003
Opto_Snap_PAC_Visio_Upright_Images

Visio stencil library of SNAP PAC system components for Visio 2003. Images are shown in an upright position, as though the hardware were placed on a table top. Library includes left and right views of hardware in upright positions. This library supersedes SNAP PAC 2007 release images. Front view images are in a separate download.

3.007/03/2012
Drawings SNAP PAC front view images for Visio 2003
Opto_SNAP_PAC_Visio_Front_Images

Visio stencil library of SNAP PAC system components for Visio 2003. Images are shown in front view, as though the hardware were mounted on a wall. This library supersedes SNAP PAC 2007 release images. Upright views are in a separate download.

307/03/2012
Drawings CAD 3D Drawing: SNAP-AIMA-32 Analog Input Module
CAD 3D Drawing: SNAP-AIMA-32 Module

This CAD file contains a 3-dimensional drawing of the SNAP-AIMA-32 analog input module, which provides 32 channels of -20 mA to +20 mA analog current input. This drawing also applies to the SNAP-AIMA-32-FM, which is Factory Mutual approved.

 05/25/2012
Drawings CAD 3D Drawing: SNAP-AITM-8 Analog Input Module
CAD 3D Drawing: SNAP-AITM-8 Module

This CAD file contains a 3-dimensional drawing of the SNAP-AITM-8 analog input module, which provides eight channels of thermocouple or millivolt input. This drawing also applies to the SNAP-AITM-8-FM, which is Factory Mutual approved.

 05/25/2012
Drawings CAD 3D Drawing: SNAP-AIMA-4 Analog Input Module
CAD 3D Drawing: SNAP-AIMA-4 Module

This CAD file contains a 3-dimensional drawing of the SNAP-AIMA-4 analog input module, which provides four channels of -20 mA to +20 mA analog current input.

 05/25/2012
Drawings CAD 3D Drawing: SNAP-AOA-23-iSRC Analog Output Module
CAD 3D Drawing: SNAP-AOA-23-iSRC Module

This CAD file contains a 3-dimensional drawing of the SNAP-AOA-23-iSRC analog output module, which provides two isolated channels of current output with a nominal output range of 4 mA to 20 mA and also includes built-in loop sourcing capability.

This drawing also applies to the SNAP-AOA-23-iSRC-FM, which is Factory Mutual approved.

 05/25/2012
Drawings CAD 3D Drawing: SNAP-IDC5D Digital Input Module
CAD 3D Drawing: SNAP-IDC5D Module

This CAD file contains a 3-dimensional drawing of the SNAP-IDC5C digital input module, which provides four channels of 2.5-28 VDC digital input. This drawing also applies to the SNAP-IDC5DFM, which is Factory Mutual approved.

 05/25/2012
Drawings CAD 3D Drawing: SNAP-ODC5-i Digital Output Module
CAD 3D Drawing: SNAP-ODC5-i Module

This CAD file contains a 3-dimensional drawing of the SNAP-ODC5-I digital output module, which provides four isolated channels of 5-60 VDC digital output. This drawing also applies to the SNAP-ODC5-IFM, which is Factory Mutual approved.

 05/25/2012
Drawings CAD 3D Drawing: SNAP-ODC5R Reed Relay Module
CAD 3D Drawing: SNAP-ODC5R Module

This CAD file contains a 3-dimensional drawing of the SNAP-ODC5R digital output module, a Form A mechanical relay I/O module that is normally open. This drawing also applies to the SNAP-ODC5RFM, which is Factory Mutual approved.

 05/25/2012
Drawings CAD 3D Drawing: MP240D4 Solid State Relay
CAD 3D Drawing: MP240D4 Solid State Relay

This CAD file contains a 3-dimensional drawing of the MP240D4 solid state relay.

 12/10/2010
Drawings CAD 3D Drawing: 240D45 Solid State Relay
CAD 3D Drawing: 240D45 Solid State Relay

This CAD file contains a 3-dimensional drawing of the 240D45 solid state relay.

 12/10/2010
Drawings CAD 3D Drawing: Z240D10 Solid State Relay
CAD 3D Drawing: Z240D10 Solid State Relay

This CAD file contains a 3-dimensional drawing of the Z240D10 solid state relay.

 12/09/2010
Drawings CAD 3D Drawing: DC200P Solid State Relay
CAD 3D Drawing: DC200P Solid State Relay

This CAD file contains a 3-dimensional drawing of the DC200P solid state relay.

 12/09/2010
Drawings CAD 3D Drawing: 240D30-HS Solid State Relay
CAD 3D Drawing: 240D30-HS Solid State Relay

This CAD file contains a 3-dimensional drawing of the 240D30-HS solid state relay, which includes an integrated heat sink.

 12/09/2010
Drawings CAD 3D Drawing: SNAP-PAC-SB1 Brain
CAD 3D Drawing: SNAP-PAC-SB1 Brain

This CAD file contains a 3-dimensional drawing of the SNAP-PAC-SB1 serial brain.

 12/09/2010
Drawings CAD 3D Drawing: SNAP-IDC5MA Digital Input Module
CAD 3D Drawing: SNAP-IDC5MA Module

This CAD file contains a 3-dimensional drawing of the SNAP-IDC5MA digital input module, which provides four channels of 10-32 VDC digital input and has convenient manual off/manual on/automatic switches for testing.

 12/08/2010
Drawings CAD 3D Drawing: SNAP-PAC-S2 Standalone Controller
CAD 3D Drawing: SNAP-PAC-S2 Controller

This CAD file contains a 3-dimensional drawing of the SNAP-PAC-S2 standalone programmable automation controller.

 12/08/2010
Drawings CAD 3D Drawing: SNAP-PAC-S1-W Wired+Wireless Controller
CAD 3D Drawing: SNAP-PAC-S1-W Controller

This CAD file contains a 3-dimensional drawing of the SNAP-PAC-S1-W standalone programmable automation controller. This controller communicates over a wired Ethernet network, over a wireless LAN, or both at once.

 12/08/2010
Drawings CAD 3D Drawing: SNAP-ODC5R5 Reed Relay Module
CAD 3D Drawing: SNAP-ODC5R5 Module

This CAD file contains a 3-dimensional drawing of the SNAP-ODC5R5 digital output module, a Form A mechanical relay I/O module that is normally closed. This drawing also applies to the SNAP-ODC5R5FM, which is Factory Mutual approved.

 12/08/2010
Drawings CAD 3D Drawing: SNAP-PAC-EB2-W Wired+Wireless Brain
CAD 3D Drawing: SNAP-PAC-EB2-W Brain

This CAD file contains a 3-dimensional drawing of the SNAP-PAC-EB2-W Wired+Wireless Ethernet brain. The brain provides I/O processing for a rack of I/O and communications on a wired Ethernet network, a wireless LAN, or both.

 12/08/2010
Drawings CAD 3D Drawing: SNAP-PAC-S2-W Wired+Wireless Controller
CAD 3D Drawing: SNAP-PAC-S2-W Controller

This CAD file contains a 3-dimensional drawing of the SNAP-PAC-S2-W Wired+Wireless standalone programmable automation controller. This controller communicates over a wired Ethernet network, a wireless LAN, or both.

 12/08/2010
Drawings CAD Drawing: Base for SNAP-PAC-RCK4, SNAP-PAC-RCK4-FM
CAD Drawing: SNAP-PAC-RCK4 Base

This CAD file includes a drawing of the base for the SNAP-PAC-RCK4, a mounting rack that holds one SNAP PAC brain or on-the-rack controller plus any mix of up to four analog, digital, and serial SNAP I/O modules.

This drawing also applies to the SNAP-PAC-RCK4-FM, which is Factory Mutual approved.

 12/14/2009
Drawings CAD Drawing: Base for SNAP-PAC-RCK8, SNAP-PAC-RCK8-FM
CAD Drawing: SNAP-PAC-RCK8 Base

This CAD file includes a drawing of the base for the SNAP-PAC-RCK8, a mounting rack that holds one SNAP PAC brain or on-the-rack controller plus any mix of up to eight analog, digital, and serial SNAP I/O modules.

This drawing also applies to the SNAP-PAC-RCK8-FM, which is Factory Mutual approved.

 12/14/2009
Drawings CAD Drawing: Base for SNAP-PAC-RCK12, SNAP-PAC-RCK12-FM
CAD Drawing: SNAP-PAC-RCK12 Base

This CAD file includes a drawing of the base for the SNAP-PAC-RCK12, a mounting rack that holds one SNAP PAC brain or on-the-rack controller plus any mix of up to 12 analog, digital, and serial SNAP I/O modules.

This drawing also applies to the SNAP-PAC-RCK12-FM, which is Factory Mutual approved.

 12/14/2009
Drawings CAD Drawing: Base for SNAP-PAC-RCK16, SNAP-PAC-RCK16-FM
CAD Drawing: SNAP-PAC-RCK16 Base

This CAD file includes a drawing of the base for the SNAP-PAC-RCK16, a mounting rack that holds one SNAP PAC brain or on-the-rack controller plus any mix of up to 16analog, digital, and serial SNAP I/O modules.

This drawing also applies to the SNAP-PAC-RCK16-FM, which is Factory Mutual approved.

 12/14/2009
Drawings CAD Drawing: Base for SNAP-B4M
CAD Drawing: SNAP-B4M Rack Base

This CAD file contains a drawing of the base of the SNAP-B4M mounting rack, which mounts SNAP I/O modules with a legacy brain or rack-mounted controller.

NOTE: For new development, we recommend SNAP PAC racks, brains, and controllers instead.

 12/14/2009
Drawings CAD Drawing: Base for SNAP-B8M
CAD Drawing: SNAP-B8M Rack Base

This CAD file contains a drawing of the base of the SNAP-B8M mounting rack, which mounts SNAP I/O modules with a legacy brain or rack-mounted controller.

NOTE: For new development, we recommend SNAP PAC racks, brains, and controllers instead.

 12/14/2009
Drawings CAD Drawing: Base for SNAP-B12M
CAD Drawing: SNAP-B12M Rack Base

This CAD file contains a drawing of the base of the SNAP-B12M mounting rack, which mounts SNAP I/O modules with a legacy brain or rack-mounted controller.

NOTE: For new development, we recommend SNAP PAC racks, brains, and controllers instead.

 12/14/2009
Drawings CAD Drawing: Base for SNAP-B16M
CAD Drawing: SNAP-B16M Rack Base

This CAD file contains a drawing of the base of the SNAP-B16M mounting rack, which mounts SNAP I/O modules with a legacy brain or rack-mounted controller.

NOTE: For new development, we recommend SNAP PAC racks, brains, and controllers instead.

 12/14/2009
Drawings CAD Drawing: SNAP-SCM-232 Serial Module
CAD Drawing: SNAP-SCM-232 Module
This CAD file includes drawings for the SNAP-SCM-232 serial communication module. This module provides two RS-232 serial ports, so that local serial devices can communicate with the SNAP PAC I/O processor (rack-mounted controller or brain).
 02/24/2009
Drawings CAD Drawing: B3000-B SNAP Analog/Digital Brain, mistic Protocol
CAD Drawing: B3000-B SNAP Analog/Digital Brain, mistic Protocol
This CAD file includes drawings for the B3000-B analog/digital brain.
 11/25/2008
Drawings CAD Drawing: SNAP-PAC-S2 Standalone Industrial Controller
CAD Drawing: SNAP-PAC-S2 Controller
This CAD file includes drawings of the SNAP-PAC-S2 programmable automation controller, a standalone industrial controller.
 10/20/2008
Drawings Opto 22 legacy products for Visio 2003
Opto 22 Legacy Products for Visio 2003
Visio stencil library of Opto 22 SNAP (pre SNAP PAC system) and other hardware images for Visio 2003.
207/11/2008
Drawings CAD Drawing: SNAP-PAC-SB1 Brain
CAD Drawing: SNAP-PAC-SB1 Brain
This CAD file includes drawings for the SNAP-PAC-SB1 brain, which provides distributed control on a serial link for the SNAP PAC System.
 06/16/2008
Drawings CAD Drawing: SNAP-PAC-SB2 Brain
CAD Drawing: SNAP-PAC-SB2 Brain
This CAD file includes drawings for the SNAP-PAC-SB2 brain, which provides distributed control on a serial link for the SNAP PAC System.
 06/16/2008
Drawings CAD Drawing: SNAP-IDC-HDB breakout rack
CAD Drawing: SNAP-IDC-HDB breakout rack
This CAD file includes drawings for the SNAP-IDC-HDB, a fused breakout rack for SNAP 32-channel digital input modules such as the SNAP-IDC-32 and the SNAP-ODC-32-SNK. The rack simplifies field wiring to the module.
 03/16/2007
Drawings CAD Drawing: SNAP-SCM-BB4 Breakout Rack
CAD Drawing: SNAP-SCM-BB4 breakout rack
This CAD file includes drawings for the SNAP-SCM-BB4 breakout board. The SNAP-SCM-BB4 is part of the SNAP PAC Motion Control Subsystem.
 03/16/2007
Drawings CAD Drawing: SNAP-PAC-EB1 Brain
CAD Drawing: SNAP-PAC-EB1 Brain

This CAD file includes drawings for the SNAP-PAC-EB1 and SNAP-PAC-EB1-FM brains, which provide distributed control for the SNAP PAC System.

 03/16/2007
Drawings CAD Drawing: SNAP-PAC-EB2 Brain
CAD Drawing: SNAP-PAC-EB2 Brain

This CAD file includes drawings for the SNAP-PAC-EB2 and SNAP-PAC-EB2-FM brains, which provide distributed control for the SNAP PAC System.

 03/16/2007
Drawings CAD Drawing: SNAP-AIMA-HDB Breakout Rack
CAD Drawing: SNAP-AIMA-HDB Breakout Rack
This CAD file includes drawings for the SNAP-AIMA-HDB breakout rack, which is used to provide safe and convenient field wiring for the 32-channel SNAP-AIMA-32 analog input module.
 03/16/2007
Drawings CAD Drawing: SNAP-AIV-HDB Breakout Rack
CAD Drawing: SNAP-AIV-HDB Breakout Rack
This CAD file includes drawings for the SNAP-AIV-HDB breakout rack, which provides a convenient way to wire field devices to the 32-channel SNAP-AIV-32 analog input module.
 03/16/2007
Drawings CAD Drawing: SNAP-PAC-RCK4, SNAP-PAC-RCK4-FM Mounting Rack
CAD Drawing: SNAP-PAC-RCK4

This CAD file includes drawings of the SNAP-PAC-RCK4, a mounting rack that holds one SNAP PAC brain or on-the-rack controller plus any mix of up to four analog, digital, and serial SNAP I/O modules.

This drawing also applies to the SNAP-PAC-RCK4-FM, which is Factory Mutual approved.

 03/16/2007
Drawings CAD Drawing: SNAP-PAC-RCK8, SNAP-PAC-RCK8-FM Mounting Rack
CAD Drawing: SNAP-PAC-RCK8 Mounting Rack

This CAD file includes drawings of the SNAP-PAC-RCK8, a mounting rack that holds one SNAP PAC brain or on-the-rack controller plus up to eight analog, digital, and serial SNAP I/O modules.

The drawing also applies to the SNAP-PAC-RCK-8-FM rack, which is Factory Mutual approved.

 03/16/2007
Drawings CAD Drawing: SNAP-PAC-RCK12, SNAP-PAC-RCK12-FM Mounting Rack
CAD Drawing: SNAP-PAC-RCK12 Mounting Rack

This CAD file includes drawings of the SNAP-PAC-RCK12 mounting rack, which holds one SNAP PAC brain or on-the-rack controller plus up to 12 analog, digital, and serial SNAP I/O modules.

This drawing also applies to the SNAP-PAC-RCK12-FM rack, which is Factory Mutual approved.

 03/16/2007
Drawings CAD Drawing: SNAP-PAC-RCK16, SNAP-PAC-RCK16-FM Mounting Rack
CAD Drawing: SNAP-PAC-RCK16 Mounting Rack

This CAD file includes drawings of the SNAP-PAC-RCK16, a mounting rack that holds one SNAP PAC brain or on-the-rack controller, plus up to 16 analog, digital, and serial SNAP I/O modules.

This drawing also applies to the SNAP-PAC-RCK16-FM rack, which is Factory Mutual approved.

 03/16/2007
Drawings CAD Drawing: SNAP-RCK-M2B Rack Adapter
CAD Drawing: SNAP-RCK-M2B Rack Adapter
This CAD file includes drawings of the SNAP-RCK-M2B rack adapter. This adapter makes it possible for customers who are upgrading existing systems to temporarily mount a SNAP PAC brain or on-the-rack controller on a legacy SNAP B-series rack.
 03/16/2007
Drawings CAD Drawing: SNAP-AIV-32, SNAP-AIMA-32
CAD Drawing: SNAP-AIV-32, SNAP-AIMA-32
This CAD file includes drawings of the SNAP-AIV-32 and SNAP-AIMA-32 analog input modules, which each have 32 input points per module.
 03/07/2007
Drawings CAD Drawing: SNAP-IAC-16/IAC-A-16/IDC-16
CAD Drawing: SNAP-IAC-16/IAC-A-16/IDC-16
This CAD file includes drawings for three 16-channel SNAP digital input modules: the SNAP-IAC-16, the SNAP-IAC-A-16, and the SNAP-IDC-16. Each module provides channel-to-channel isolation.
 03/07/2007
Drawings CAD Drawing: SNAP-ODC-HDB Breakout Rack
CAD Drawing: SNAP-ODC-HDB Breakout Rack
This is a CAD drawing of the SNAP-ODC-HDB breakout rack, which is used with two SNAP high-density digital output modules: SNAP-ODC-32-SNK and SNAP-ODC-32-SRC.
 01/31/2007
Drawings CAD Drawing: SNAP I/O Module
CAD Drawing: SNAP Module
This CAD file includes drawings that apply to most SNAP analog and digital I/O modules.
 12/12/2006
Drawings CAD Drawing: B1 Digital Brain Board
CAD Drawing: B1 Brain Board
This CAD file is a drawing of the digital Optomux B1 brain board, a legacy product.
 12/12/2006
Drawings CAD Drawing: B2 Analog Brain Board
CAD Drawing: B2 Brain Board
This CAD file includes drawings for the analog Optomux B2 brain board, a legacy product.
 12/12/2006
Drawings CAD Drawing: SNAP-AITM-8 Analog Input Module
CAD Drawing: SNAP-AITM-8 Module
This CAD file includes drawings for the SNAP-AITM-8 analog input module. This module offers eight channels of thermocouple or millivolt input. Each channel can be individually configured to accept a type B, C, D, E, G, J, K, N, R, S, or T thermocouple or a -75 to + 75 mV, -50 to +50 mV, or -25 to +25 mV input.
 12/12/2006
Drawings CAD Drawing: SNAP-M64 I/O Mounting Rack
CAD Drawing: SNAP-M64 I/O Mounting Rack
This CAD file includes drawings for the SNAP-M64 I/O mounting rack. The SNAP-M64 rack mounts one SNAP PAC R-series controller or one SNAP Simple brain, and up to 16 analog, digital, and serial I/O modules.
 12/12/2006
Drawings CAD Drawing: SNAP-M48 I/O Mounting Rack
CAD Drawing: SNAP-M48 I/O Mounting Rack
This CAD file includes drawings for the SNAP-M48 I/O mounting rack. The SNAP-M48 rack mounts one SNAP PAC R-series controller or one SNAP Simple brain, and up to 12 analog, digital, and serial I/O modules.
 12/12/2006
Drawings CAD Drawing: SNAP-M32 I/O Mounting Rack
CAD Drawing: SNAP-M32 I/O Mounting Rack
This CAD file includes drawings for the SNAP-M32 I/O mounting rack. The SNAP-M32 rack mounts one SNAP PAC R-series controller or one SNAP Simple brain, and up to eight analog, digital, and serial I/O modules.
 12/12/2006
Drawings CAD Drawing: SNAP-PAC-R1/R2 On-the-rack Controllers
CAD Drawing: SNAP-PAC-R1 Controller

This CAD file includes drawings of the SNAP-PAC-R1 and SNAP-PAC-R2 programmable automation controllers. Both are rack-mounted controllers and I/O processors.

These drawings also apply to the SNAP-PAC-R1-FM and SNAP-PAC-R2-FM controllers, which are Factory Mutual approved.

 12/12/2006
Drawings CAD Drawing: SNAP-PAC-S1 and SNAP-PAC-S1-FM Standalone Industrial Controller
CAD Drawing: SNAP-PAC-S1 Controller

This CAD file includes drawings of the SNAP-PAC-S1 programmable automation controller, a standalone industrial controller.

The drawing also applies to the SNAP-PAC-S1-FM, which is Factory Mutual approved.

 12/12/2006
Drawings AutoCAD Drawings
Opto22AutoCadDrawings.zip
This file contains AutoCAD drawings of Opto 22 products dating from 1988 to 2003. These are the same drawings that have been available on our BBS. Included is an Excel file describing the file names and relevant Opto 22 part numbers.
1.108/31/2005

My.Opto22

All Opto22

Request Information
  • FREE Product Brochure
  • Product Demonstration
  • PreSales Engineering Assistance

Opto 22 Product Support

Opto 22 Product Support is FREE Monday through Friday 7 a.m. to 5 p.m. Pacific Time

Product Support Numbers:

Local: (951) 695-3080
Toll-Free: (800) 835-6786
Fax: (951) 695-3017
support@opto22.com

Products

None

Downloads

None

Documents

None