Opto 22

43044 Business Park Drive, Temecula, CA 92590 USA
Local & outside the USA:(951) 695-3000
Toll-Free within the USA:(800) 321-6786
Fax: (951) 695-3095
Email: sales@opto22.com

All Opto 22 industrial control and automation software and firmware can be downloaded at any time. While most software is free, some software must be purchased and will require an OptoPassword to install.
> If I bought software and a new version is released, can I get the upgrade for free?
> For more sample files, see the OptoForum.
> Looking for groov files? Go to groov.com/use-groov.

Search Downloads:

Filter by:
   What are these?
CategoryDescription/File NameVersionDate
Diagnostics & Utilities OptoTagPreserve
OptoTagPreserve

OptoTagPreserve copies variables from your PAC Control strategy running on a SNAP PAC controller and saves them in a password-protected binary file or a plain-text XML, OptoScript, or init.txt file.

The primary reason you would use this utility is to make it easier to preserve variable states when you need to update firmware on the controller. Updating firmware erases battery-backed data including persistent variables and variables initialized on strategy download. Use OptoTagPreserve before loading new firmware to archive tag values to the computer, and then restore them after firmware is loaded and the strategy has been downloaded.

IMPORTANT:
- Make sure the strategy is stopped before restoring tag values. If the strategy is running, unexpectedly changing values can cause unpredictable results with strategy operation.
- Writing to a plain-text file requires that the strategy contain a special variable allowing plain text.

See the technical note included in the download for complete information on using the utility.

1.4c09/02/2016
Diagnostics & Utilities PamScan for Windows 8/7/Vista (32-bit)
PamScan for Windows 7 and Vista - 32-bit
PamScan for Windows 8/7/Vista (32-bit) is a software utility for troubleshooting PAMUX hardware.
R5.0c11/15/2013
Diagnostics & Utilities PamScan for Windows 8/7/Vista (64-bit)
PamScan for Windows 7 and Vista - 64-bit
PamScan for Windows 8/7/Vista (64-bit) is a software utility for troubleshooting Pamux hardware.
R5.0c11/15/2013
Diagnostics & Utilities PamScan PCI for Windows XP/2000
PamScan for Windows XP and 2000
PamScan PCI Windows XP/2000 is a software utility for troubleshooting PAMUX hardware.
R3.0a11/07/2012
Diagnostics & Utilities OptoEMU Sensor Analog Calibration File
OptoEMU Sensor Analog Calibration File

An analog calibration issue exists for OptoEMU-SNR-3V units with date codes of July 2011 and earlier. This issue only affects customers who are using the product with a "direct connection," that is, measuring power via current transformers (CTs). The calibration issue does not affect those using the product with pulse inputs.

This zip file contains a command line utility and a technical note (in PDF format) showing you how to determine whether your unit is affected and how to fix the issue.

1.008/03/2011
Diagnostics & Utilities PROFIBUS-DP Master Software
PROFIBUS DP EXAMPLE
The Opto 22 PROFIBUS DP® Master Software is an example of how to use Opto 22’s ioControl or PAC Control software to monitor and control a PROFIBUS DP network through a SNAP-SCM-PROFI module. The example includes a configuration utility and an example ioControl strategy.
R1.1305/05/2011
Diagnostics & Utilities PamScan for MS-DOS
pamscan.zip
PamScan for MS-DOS is a software utility for troubleshooting Pamux hardware.
R3.0a10/10/2003
Diagnostics & Utilities ArcTest ISA Bus Configuration Utility
arctest.zip
This software, mentioned in Application Note 9809 (see related documentation below), is for configuring an ISA bus card. The file contains the program source code, a help file, and a copy of Microsoft's QBASIC compiler.
 10/10/2003
Diagnostics & Utilities host60.zip
host60.zip
Mistic I/O is a serial (RS422/485) protocol allowing up to 4,096 I/O points (per serial link) to be connected to a computer or Mistic controller used with Mistic-protocol brains and brain boards such as the B100, B200, and B3000. For use with Mistic controllers and I/O.
 10/09/2003
Diagnostics & Utilities Mistic I/O Scanning Utility
mistuser.exe
Mistic I/O is a serial (RS422/485) protocol allowing up to 4,096 I/O points (per serial link) to be connected to a computer or Mistic controller used with Mistic-protocol brains and brain boards such as the B100, B200, and B3000. For Microsoft Windows 95/Windows NT users.
 10/09/2003

My.Opto22

All Opto22

Request Information
  • FREE Product Brochure
  • Product Demonstration
  • PreSales Engineering Assistance

Opto 22 Product Support

Opto 22 Product Support is FREE Monday through Friday 7 a.m. to 5 p.m. Pacific Time

Product Support Numbers:

Local: (951) 695-3080
Toll-Free: (800) 835-6786
Fax: (951) 695-3017
support@opto22.com

Products

None

Downloads

None

Documents

None