Opto 22

43044 Business Park Drive, Temecula, CA 92590 USA
Local & outside the USA:(951) 695-3000
Toll-Free within the USA:(800) 321-6786
Fax: (951) 695-3095
Email: sales@opto22.com

Scaling and Linearization Example


Filename: Scaling_and_Linearizing_Example_R100.zip
File Size: 152 KB
Version: R1.0.0
Last Update: 8/23/2010
Compatibility:

Description:

A example strategy written in PAC Control Basic 8.2 that demonstrates how to scale and linearize values. This example strategy uses subroutines to perform most calculations.

Notes:

This example strategy is useful if you are using a SNAP-AIRTD module with an unsupported probe (a probe that is not 100-ohm platinum or, for the SNAP-AIRTD-10, 10-ohm copper). It is also helpful for converting resistance to temperature when you are using a thermistor with a SNAP-AIR40K module.

Here are some other situations where linearization is typically required:

* Calculating tank volume
* Using non-linear transducers (such as thermocouples or very high-temperature [non-linear] devices)
* Receiving data from a third-party serial device
* Linearizing non-linear mechanical measurements

My.Opto22

All Opto22

Request Information
  • FREE Product Brochure
  • Product Demonstration
  • PreSales Engineering Assistance

Opto 22 Product Support

Opto 22 Product Support is FREE Monday through Friday 7 a.m. to 5 p.m. Pacific Time

Product Support Numbers:

Local: (951) 695-3080
Toll-Free: (800) 835-6786
Fax: (951) 695-3017
support@opto22.com

Products

None

Downloads

None

Documents

None