OptoDisplay and ioDisplay object dimensions are limited to 999 when entered in the Graphic Dynamic Attributes window

Applies To:

ioDisplay Professional
ioDisplay Basic
FactoryFloor Software - OptoDisplay

Versions Affected:

Problem was discovered in version: OptoDisplay R4.1a / ioDisplay R6.1a
Problem is corrected in version: ioDisplay R7.0a

Symptoms:

When a graphic is resized in the Graphic Dynamic Attributes window of OptoDisplay or ioDisplay Configurator, the maximum width (W:) and height (H:) is 999.

Workaround:

To set dimensions greater than 999 for the width (W:) and height (H:), use the graphic’s sizing handles.

Select a graphic with the Select tool.

Position the pointer over a square handle, click, drag, and release when the object is the size you want.

Sizes over 999 are now kept.

Resolution:

Opto 22 has corrected the described behavior in ioDisplay. The object dimension limits have been changed to 99,999.

Questions?

Contact: Opto 22 Product Support.
Phone: 800-835-6786 or 951-695-3080
Email: support@opto22.com

DISCLAIMER

This Opto 22 Knowledge Base ('OptoKB') article is intended to provide general technical information on a particular subject or subjects and is not an exhaustive treatment of such subjects. Accordingly, the information in this OptoKB article is not intended to constitute application, design, software, or other professional engineering advice or services. Opto 22 may modify the OptoKB articles at any time. Before making any decision or taking any action which might affect your equipment, you should consult a qualified professional.

OPTO 22 DOES NOT WARRANT THE COMPLETENESS, TIMELINESS, OR ACCURACY OF THE DATA CONTAINED IN THIS OPTOKB ARTICLE AND MAY MAKE CHANGES THERETO AT ANY TIME AT ITS SOLE DISCRETION WITHOUT NOTICE. FURTHER, ALL INFORMATION CONVEYED HEREBY IS PROVIDED TO USERS 'AS IS.' IN NO EVENT SHALL OPTO 22 BE LIABLE FOR ANY DAMAGES OF ANY KIND INCLUDING DIRECT, INDIRECT INCIDENTAL, CONSEQUENTIAL, LOSS PROFIT, OR DAMAGE, EVEN IF OPTO 22 HAS BEEN ADVISED ON THE POSSIBILITY OF SUCH DAMAGES.

OPTO 22 DISCLAIMS ALL WARRANTIES WHETHER EXPRESSED OR IMPLIED WITH RESPECT TO THE INFORMATION (INCLUDING HARDWARE, SOFTWARE, AND/OR FIRMWARE) PROVIDED HEREBY, INCLUDING THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, MERCHANTIBILITY, AND NON-INFRINGEMENT. Note that certain jurisdictions do not sanction the exclusion of implied warranties: thus, this disclaimer may not apply to you.