KB53125
Published: August 23, 2006
Revision: 1.0

Modifying Custom Caption in windowless project, crashes OptoDisplay Configurator


Applies To:

FactoryFloor Software - OptoDisplay

Versions Affected:

Problem was discovered in version: R4.1a


Symptoms:

If the Custom Caption in an OptoDisplay project with no windows is modified, OptoDisplay Configurator crashes.

The Custom Caption field is accessed from OptoDisplay Configurator menu item Configure→Runtime. When OK is clicked after modifying the field, Configurator crashes.

[image1]


Workaround:

The following steps will resolve this issue:

  1. Add a blank window to the project in which the Custom Caption needs to be modified.
  2. Save and close the OptoDisplay project.
  3. Reopen the OptoDisplay project, and modify the Custom Caption as needed.
  4. Delete the blank window.
  5. Save the project. The Custom Caption has been successfully modified.

  6. Resolution:

    Opto 22 is aware of this issue.


    Questions?

    Contact: Opto 22 Product Support.
    Phone: 800-835-6786 or 951-695-3080
    Email: support@opto22.com


    DISCLAIMER

    This Opto 22 Knowledge Base ('OptoKB') article is intended to provide general technical information on a particular subject or subjects and is not an exhaustive treatment of such subjects. Accordingly, the information in this OptoKB article is not intended to constitute application, design, software, or other professional engineering advice or services. Opto 22 may modify the OptoKB articles at any time. Before making any decision or taking any action which might affect your equipment, you should consult a qualified professional.

    OPTO 22 DOES NOT WARRANT THE COMPLETENESS, TIMELINESS, OR ACCURACY OF THE DATA CONTAINED IN THIS OPTOKB ARTICLE AND MAY MAKE CHANGES THERETO AT ANY TIME AT ITS SOLE DISCRETION WITHOUT NOTICE. FURTHER, ALL INFORMATION CONVEYED HEREBY IS PROVIDED TO USERS 'AS IS.' IN NO EVENT SHALL OPTO 22 BE LIABLE FOR ANY DAMAGES OF ANY KIND INCLUDING DIRECT, INDIRECT INCIDENTAL, CONSEQUENTIAL, LOSS PROFIT, OR DAMAGE, EVEN IF OPTO 22 HAS BEEN ADVISED ON THE POSSIBILITY OF SUCH DAMAGES.

    OPTO 22 DISCLAIMS ALL WARRANTIES WHETHER EXPRESSED OR IMPLIED WITH RESPECT TO THE INFORMATION (INCLUDING HARDWARE, SOFTWARE, AND/OR FIRMWARE) PROVIDED HEREBY, INCLUDING THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, MERCHANTIBILITY, AND NON-INFRINGEMENT. Note that certain jurisdictions do not sanction the exclusion of implied warranties: thus, this disclaimer may not apply to you.

    Copyright © 2024 Opto 22. All rights reserved.