Opto 22
43044 Business Park Drive, Temecula, CA 92590 USA
Local & outside the USA:(951) 695-3000
Toll-Free within the USA:(800) 321-6786
Fax: (951) 695-3095
Email: sales@opto22.com
This item has been successfully added to your favorites.
This item has been successfully added to your subscriptions.
This item has been successfully added to your cart.
The SNAP PAC Learning Center is a fully functional, complete package of Opto 22 hardware and software that provides everything you need to learn about Opto 22’s SNAP PAC System. The Learning Center includes PAC Project Basic software, a SNAP-PAC-R1 rack-mounted controller, SNAP I/O modules and mounting rack, and a load panel with digital and analog sensors and actuators (switches, LEDs, a temperature probe, a meter, and so on).
The included step-by-step tutorial guides you through the hardware assembly and software installation and gives you hands-on programming experience with the PAC Project software. You will configure I/O points, read and write to those points, create several flowcharts as part of a control strategy, and build a graphical user interface.
Because the SNAP PAC Learning Center consists of the same field-proven, real hardware and software used by Opto 22 customers all over the world, you'll be able to apply not only the knowledge you've learned, but also the actual Learning Center hardware and software in your next automation project.
Included Components
- - PAC Project Basic software
- - SNAP-PAC-R1 controller
- - SNAP-PAC-RCK8 8-position module mounting rack
- - Five SNAP I/O modules (two digital, three analog)
- - Learning Center load panel
- - Power cable. Input voltage range for the Learning Center is 120–300 VAC. The appropriate power cable is included, based on your location (U.S., international, or UK); if you need a different cable, please call Opto 22 at 800-321-6786 (toll-free in the U.S.) or 951-695-3000.
- - Ethernet Category 5 crossover cable
- - SNAP PAC Learning Center Guide (printed)
- - Complete PAC Project documentation (in PDF format)
Computer Requirements
To use the SNAP PAC Learning Center with your PC, you must have
the following minimum computer configuration:
- Computer with at least the minimum processor required for your version of Microsoft(R) Windows(R), and Ethernet capability.
- Microsoft Windows 7 Professional (32-bit or 64-bit), Windows Vista(R) Business (32-bit), or Windows XP Professional (32-bit, with SP2 or higher). Microsoft Windows server, 64-bit versions of Windows Vista and XP, and embedded operating systems are not supported.
- VGA or higher resolution monitor (Super VGA recommended), minimum size 800x600 with small fonts.
- Mouse or other pointing device. Printer optional.
- Available hard disk space required: 124 MB
| 1639 |
|
| 1696 |
|
| 1638 |
The SNAP PAC Learning Center Guide is a hands-on, learn-by-example training course developed for use with the SNAP-PACLC Learning Center kit.
Each chapter of the guide introduces aspects of the SNAP hardware and the PAC Project software suite. You'll learn to install and configure hardware, read and write to points, develop a control application (called a strategy), and create an HMI to interact with the controller and I/O.
This file contains only the guide itself as a PDF; for the complete tutorial, download 1638_SNAP_PAC_Learning_Center.zip.
|
| 1641 |
This supplement to the SNAP PAC Learning Center Guide teaches you how to use proportional integral derivative (PID) loops with PAC Control software and a SNAP PAC R-series controller.
This PDF is the manual only; for the complete tutorial, download 1641_OptoTutorial_SNAP_PAC_PID.zip.
The tutorial is designed to be used with a SNAP PAC Learning Center. If you don't have a Learning Center but are using PID with PAC Control, you will still find conceptual information in the PDF to be useful.
|
| 1642 |
This supplement to the SNAP PAC Learning Center Guide teaches you how to use the file management and FTP features of SNAP PAC controllers.
This PDF is the manual only; for the complete tutorial, download 1642_OptoTutorial_File_Management_And_FTP.zip.
The tutorial is designed to be used with a SNAP PAC Learning Center. If you don't have a Learning Center but are using SNAP PACs with ioControl, you will still find information in the PDF to be useful.
|
| 1646 |
|
| 2216 |
|
| 0892 |
|
| 1648 |
|
This supplement to the SNAP PAC Learning Center Tutorial teaches you how to use proportional integral derivative ( PID) loops with PAC Control software and a SNAP PAC R-series controller. This zip file includes the complete tutorial, sample files, and documentation.
The tutorial is designed to be used with a SNAP-PACLC learning center kit. If you don't have a Learning Center but are using PID with PAC Control, you will find conceptual information in the PDF document to be useful.
|
The SNAP PAC Learning Center tutorial is a hands-on, learn-by-example training course developed for use with the SNAP-PACLC Learning Center kit.
Each part of the tutorial introduces aspects of the SNAP hardware and the PAC Project software suite. You'll learn to install and configure hardware, read and write to points, develop a control application (called a strategy), and create an HMI (human-machine interface) to interact with the controller and I/O.
This zip file includes the complete tutorial with sample files and documentation.
|
|
|