The 120D10 is a DC-controlled Power Series relay that switches 120 VAC at up to 10 A.
Power Series relays provide 4000 volts of isolation between input and output, and offer zero-voltage turn-on and zero-current turn-off. They are UL and CSA recognized and are a CE component.
Lots of information on choosing and using SSRs can be found in the SSR data sheet. Also see the Manufacturers' part number cross-reference list.
This SSR carries a lifetime warranty.
NOTE: We do not recommend mounting the terminal side of the SSR to a flat PCB (printed circuit board) or other flat surface, because there may be some variation in terminal height from one terminal to another and from one SSR to another. Use the MP or P series SSRs for PCB mounting.
Optical Isolation Input to Output
4,000 V
Turn-on Time
½ cycle maximum
Turn-off Time
Operating Frequency
25 to 65 Hz (operates at 400 Hz with six times off-state leakage)
Coupling Capacitance Input to Output
8 pF maximum
DV/DT Off-state
200 volts per microsecond
DV/DT Commutating
Snubbed for rated current at 0.5 power factor
120D3
120D10
120D25
120D45
Nominal AC Line Voltage
120
Nominal Current Rating (Amps)
3*
10*
25*
45*
1 cycle Surge (Amps) Peak
85
110
250
650
Nominal Signal Input Resistance (Ohms)
1000
Signal Pick-up Voltage
3VDC (32V allowed)
3VDC(32V allowed)
Signal Drop-out Voltage
1 VDC
Peak Repetitive Voltage Maximum
600
Maximum Output Voltage Drop
1.6 volts
Off-State Leakage (mA) Maximum
2.5mA
7 mA
Operating Voltage Range (Volts AC)
12–140
I2t Rating t=8.3 (ms)
30
50
1750
Isolation Voltage
4,000VRMS
θjc** (°C/Watt)
11
1.3
1.2
0.67
Dissipation (Watts/Amp)
1.7
1.6
0.9
Notes: * Ambient temperature will affect the current rating. For details, see the Thermal Ratings charts in the Solid State Relays Data Sheet (form 0859). ** θjc = Thermal resistance from internal junction to base. Maximum internal junction temperature is 110 °C.
Guaranteed-for-life Opto 22 solid state relays can often be substituted for other manufacturers' relays. This technical note lists part number matches and notes differences with other manufacturers' products.
For more information on SSRs, see the Solid State Relays Data Sheet, form 0859.