Item

Specification

CPU

32-bit Motorola 68EC020 processor

CPU clock frequency

16.67 MHz

Memory
    RAM
    Flash ROM

1 MB with battery backup
256 KB

RAM/clock battery

3.6-volt lithium, non-rechargeable, user replaceable, p/n G4BATT32

I/O

Opto 22 remote I/O using RS-485

Communication

COM 0: jumper selectable as RS-232 or RS-485, 2-wire or 4-wire. Modem control signals are present for RS-232 (RTS, CTS, DTR, DCD, and R). Pull-up, pull-down, and termination are jumper selectable for RS-485 operation, allowing multidrop operation.

COM 1: dedicated Opto 22 remote I/O port (2-wire RS-485 with interrupt capability)

COM 2 and COM 3 (LCSX-PLUS only): jumper selectable RS-232 or RS-485. RS-232 signals include TX, RX, RTS, and CTS. RS-485 is either 2-wire or 4-wire, with selectable termination and biasing.

Note: All ports use low-noise slew-rate-limited drivers and are transient protected to 400 W.

Real-time clock

Clock/calendar, Epson 64613 with battery backup

Power requirements

5 VDC ± 5% at 500 mA (maximum)

Typical operating temperature

0 °C to 70 °C

Storage temperature

-40 °C to 85 °C

Humidity

5% to 95% relative humidity, non-condensing

Software

FactoryFloor (OptoControl, OptoDisplay, OptoServer, and OptoConnect) and Classic software (Cyrano, Mistic MMI, and MDS)

System monitor

Processor and power watchdog timers