Opto 22
43044 Business Park Drive, Temecula, CA 92590 USA
Local & outside the USA:(951) 695-3000
Toll-Free within the USA:(800) 321-6786
Fax: (951) 695-3095
Email: sales@opto22.com
This item has been successfully added to your favorites.
This item has been successfully added to your subscriptions.
This item has been successfully added to your cart.
SNAP PAC 16-Module Mounting Rack
$161.00 USD
Price in USA and Canada Only
Availability: In Stock
The SNAP-PAC-RCK16 mounts one SNAP PAC brain or on-the-rack controller and up to 16 analog, digital, serial, and special-purpose SNAP I/O modules. The SNAP-PAC-RCK16 can be DIN-rail or panel mounted.
This rack works with all SNAP I/O modules on the Opto 22 website. Analog, digital, and serial modules can be mixed on the rack and placed in any position. (Some serial modules are limited to a maximum of eight on one rack. See module data sheets for limitations and power requirements.)
Together with I/O modules and a brain or rack-mounted controller, this rack forms an I/O unit that provides distributed control in a SNAP PAC System. The I/O unit can also be used for PC-based control or as intelligent remote I/O for an Allen-Bradley MicroLogix PLC or other RSLogix-based system, such as ControlLogix or CompactLogix.
If you need Factory Mutual approval, see the SNAP-PAC-RCK16-FM instead.
Other SNAP PAC racks available:
NOTE: This rack replaces part number SNAP-M64. All brains that mount on a SNAP-M64 can also be mounted on this rack.
Power1 Requirements
|
5.0 to 5.2
VDC @ 4.2 Amps max
|
I/O Processor2
Compatibility
|
SNAP-PAC-R1
SNAP-PAC-R2
SNAP-PAC-EB1
SNAP-PAC-EB2
SNAP-PAC-SB1
|
SNAP-PAC-R1-FM
SNAP-PAC-R2-FM
SNAP-PAC-EB1-FM
SNAP-PAC-EB2-FM
SNAP-PAC-SB2
|
Replacement Fuse
|
SNAP-FUSE7.5AB
or Littelfuse 297 07.5
|
Rack Power Terminals
Wire Size
|
22 to 14
AWG
|
Operating Temperature
|
0 to 70
°C
|
Relative Humidity
|
95%, non-condensing
|
1 Power
requirements shown are for a rack, a processor, and a full load of analog
modules. Power requirements for SNAP serial and high-density modules
are higher. See module data sheets.
2 “I/O Processor”
means a SNAP PAC brain or SNAP PAC on-the-rack controller. For compatibility
with legacy Opto 22 products, see form #1693, Legacy and Current
Product Comparison and Compatibility Charts.
|
| 1684 |
SNAP PAC racks mount one SNAP PAC brain or on-the-rack controller, plus up to 4, 8, 12, or 16 SNAP input/output (I/O) modules. Both standard wired controllers and brains and Wired+Wireless models are mounted on these racks.
I/O modules may be analog, digital, or serial modules. All module types can be mixed together on the same rack in any position.
|
| 1569 |
|
| 1696 |
|
This CAD file includes drawings of the SNAP-PAC-RCK16, a mounting rack that holds one SNAP PAC brain or on-the-rack controller, plus up to 16 analog, digital, and serial SNAP I/O modules.
This drawing also applies to the SNAP-PAC-RCK16-FM rack, which is Factory Mutual approved.
|
This CAD file includes a drawing of the base for the SNAP-PAC-RCK16, a mounting rack that holds one SNAP PAC brain or on-the-rack controller plus any mix of up to 16analog, digital, and serial SNAP I/O modules.
This drawing also applies to the SNAP-PAC-RCK16-FM, which is Factory Mutual approved.
|