Part of the SNAP TEX family of mounting and wiring accessories, the SNAP-TEX-CBS6 cable provides neat, protected wiring from the top of a SNAP I/O module to a SNAP TEX breakout board. The cable is six feet (1.8 m) long.
Installation, maintenance, and troubleshooting are faster and simpler using SNAP TEX cables. Each cable snaps into the top of one module and terminates at the breakout board with 18-gauge, color-coded flying leads, already stripped and ready for wiring. The leads attach easily to the breakout board with spring connectors.
NOTE: On the SNAP-TEX-CBS6, wiring is straight through; there are no terminal connections. This cable can be used with many digital and analog input and output modules. See the data sheet for details.
Feature
|
SNAP-TEX-CBO6
|
SNAP-TEX-CBE6
|
SNAP-TEX-CBS6
|
Cable length
|
6 feet (1.8 meters)
|
6 feet (1.8 meters)
|
6 feet (1.8 meters)
|
Connector
|
8 pins, 0.2 in. (5.08
mm) center-to-center
|
8 pins, 0.2 in. (5.08
mm) center-to-center
|
8 pins, 0.2 in. (5.08
mm) center-to-center
|
Wires
|
8 pre-stripped, color-coded,
18 gauge
|
8 pre-stripped, color-coded,
18 gauge
|
8 pre-stripped, color-coded,
18 gauge
|
Bussing
|
Odd-numbered pins connected
|
Even-numbered pins connected*
|
No connected
|
*Do NOT
USE the CBE6 with a SNAP-TEX-FB16-H or -L breakout board. The FB16s
have odd-numbered pins connected.
|
| 1756 |
SNAP TEX cables and breakout boards are part of the SNAP TEX family of wiring and mounting accessories. These parts save time and expense during installation, maintenance, and debugging by reducing the time and effort required to wire field devices to SNAP I/O modules.
|
| 1775 |
SNAP TEX cables make wiring to field devices easier. This installation note shows how to install the following cables:
- SNAP-TEX-CBO6
- SNAP-TEX-CBE6
- SNAP-TEX-CBS6
|
| There are no related downloads for this product. |