Opto 22

43044 Business Park Drive, Temecula, CA 92590 USA
Local & outside the USA:(951) 695-3000
Toll-Free within the USA:(800) 321-6786
Fax: (951) 695-3095
Email: sales@opto22.com
Viewing
Product Type


OptoMMP Protocol Guide

Updated Document

Details: Added information for new SNAP I/O modules.

This guide is for programmers who are writing custom applications to communicate with Opto 22 memory-mapped devices. These devices include SNAP PAC controllers and SNAP PAC EB and SB brains; G4EB2 brains; SNAP Ultimate, SNAP Ethernet, and SNAP Simple I/O; E1 and E2 brain boards, and SNAP-LCE controllers.

The guide describes how to use the IEEE 1394-based OptoMMP memory-mapped protocol for programming. The guide also contains the complete memory map for all Opto 22 memory-mapped devices.

NOTE: This guide replaced previous individual programming guides for SNAP Ultimate I/O (form #1312) and SNAP Ethernet I/O (form #1227). This document was formerly called the "SNAP Ethernet-Based I/O Units Protocols and Programming Guide."

Jul 21, 2014 T12:34:53


SNAP I/O Module Integration Guide

Updated Document

Details: Added new modules

This manual is designed for OEMs and others who are communicating directly with SNAP I/O analog, digital, and serial modules. Details of both the serial and ARCNET protocols are included.

Jul 17, 2014 T17:12:38


SNAP PAC R-Series Controller Bootloader

Updated Download

Details: The R6.1a bootloader (or "loader") is now available on the Opto 22 website. This loader upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. New SNAP PAC R9.4a firmware must also be installed with the R6.1a loader to obtain microSDHC card support. See Opto 22 KB article KB83929, "Updating SNAP PAC Controllers to Use microSDHC Cards," on the Opto 22 website for important information on using the loader with SNAP PAC controllers. http://op22.co/KB83929 For more informat

This download contains special firmware for the SNAP PAC R-Series controllers that upgrades the controller bootloader (or "loader").

The R6.1a loader is now available on the Opto 22 website. This loader upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. New SNAP PAC R9.4a firmware must also be installed with the R6.1a loader to obtain microSDHC card support.

Jul 08, 2014 T11:34:15


SNAP PAC S-Series Controller Bootloader

Updated Download

Details: The R6.1a bootloader (or "loader") is now available on the Opto 22 website. This loader upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. New SNAP PAC R9.4a firmware must also be installed with the R6.1a loader to obtain microSDHC card support. See Opto 22 KB article KB83929, "Updating SNAP PAC Controllers to Use microSDHC Cards," on the Opto 22 website for important information on using the loader with SNAP PAC controllers. http://op22.co/KB83929 For more informat

This download contains special firmware for the SNAP PAC S-Series controllers that upgrades the controller bootloader (or "loader").

The R6.1a loader is now available on the Opto 22 website. This loader upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. New SNAP PAC R9.4a firmware must also be installed with the R6.1a loader to obtain microSDHC card support.

Jul 08, 2014 T11:33:59


Firmware for all SNAP PAC products

Updated Download

Details: The R9.4a firmware update for SNAP PAC controllers and brains is now available on the Opto 22 website. This update adds support for forthcoming HART protocol SNAP I/O modules and fixes issues with controller resets, communication handle operation, and Modbus communication. When installed along with the new R6.1a loader, R9.4a firmware also upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. See the SNAP PAC firmware README file for more information about fixes and improv

Firmware for all SNAP PAC products (single download)

Jul 08, 2014 T11:33:27


SoftPAC Controller Firmware

Updated Download

Details: The R9.4a firmware update for SNAP PAC controllers and brains is now available on the Opto 22 website. This update adds support for forthcoming HART protocol SNAP I/O modules and fixes issues with controller resets, communication handle operation, and Modbus communication. When installed along with the new R6.1a loader, R9.4a firmware also upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. See the SNAP PAC firmware README file for more information about fixes and improv

This download contains current firmware for the SOFTPAC software-based controller. Current firmware for all SNAP PAC brains and controllers is available in a single download here.

Jul 08, 2014 T11:33:15


SNAP-PAC-S1-W Controller Firmware

Updated Download

Details: The R9.4a firmware update for SNAP PAC controllers and brains is now available on the Opto 22 website. This update adds support for forthcoming HART protocol SNAP I/O modules and fixes issues with controller resets, communication handle operation, and Modbus communication. When installed along with the new R6.1a loader, R9.4a firmware also upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. See the SNAP PAC firmware README file for more information about fixes and improv

This download contains current firmware for the SNAP-PAC-S1-W controller. Current firmware for all SNAP PAC brains and controllers is available in a single download here.

Jul 08, 2014 T11:32:42


SNAP-PAC-S2-W Controller Firmware

Updated Download

Details: The R9.4a firmware update for SNAP PAC controllers and brains is now available on the Opto 22 website. This update adds support for forthcoming HART protocol SNAP I/O modules and fixes issues with controller resets, communication handle operation, and Modbus communication. When installed along with the new R6.1a loader, R9.4a firmware also upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. See the SNAP PAC firmware README file for more information about fixes and improv

This download contains current firmware for the SNAP-PAC-S2-W controller. Current firmware for all SNAP PAC brains and controllers is available in a single download here.

Jul 08, 2014 T11:32:35


SNAP-PAC-S2 Controller Firmware

Updated Download

Details: The R9.4a firmware update for SNAP PAC controllers and brains is now available on the Opto 22 website. This update adds support for forthcoming HART protocol SNAP I/O modules and fixes issues with controller resets, communication handle operation, and Modbus communication. When installed along with the new R6.1a loader, R9.4a firmware also upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. See the SNAP PAC firmware README file for more information about fixes and improv

This download contains current firmware for the SNAP-PAC-S2 controller. Current firmware for all SNAP PAC brains and controllers is available in a single download here.

Jul 08, 2014 T11:32:25


SNAP-PAC-S1 Controller Firmware

Updated Download

Details: The R9.4a firmware update for SNAP PAC controllers and brains is now available on the Opto 22 website. This update adds support for forthcoming HART protocol SNAP I/O modules and fixes issues with controller resets, communication handle operation, and Modbus communication. When installed along with the new R6.1a loader, R9.4a firmware also upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. See the SNAP PAC firmware README file for more information about fixes and improv

This download contains current firmware for the SNAP-PAC-S1 controller. Current firmware for all SNAP PAC brains and controllers is available in a single download here.

Jul 08, 2014 T11:32:14


SNAP-PAC-R2-W Controller Firmware

Updated Download

Details: The R9.4a firmware update for SNAP PAC controllers and brains is now available on the Opto 22 website. This update adds support for forthcoming HART protocol SNAP I/O modules and fixes issues with controller resets, communication handle operation, and Modbus communication. When installed along with the new R6.1a loader, R9.4a firmware also upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. See the SNAP PAC firmware README file for more information about fixes and improv

This download contains current firmware for the SNAP-PAC-R2-W controller. Current firmware for all SNAP PAC brains and controllers is available in a single download here.

Jul 08, 2014 T11:32:06


SNAP-PAC-R2 Controller Firmware

Updated Download

Details: The R9.4a firmware update for SNAP PAC controllers and brains is now available on the Opto 22 website. This update adds support for forthcoming HART protocol SNAP I/O modules and fixes issues with controller resets, communication handle operation, and Modbus communication. When installed along with the new R6.1a loader, R9.4a firmware also upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. See the SNAP PAC firmware README file for more information about fixes and improv

This download contains current firmware for the SNAP-PAC-R2 controller. Current firmware for all SNAP PAC brains and controllers is available in a single download here.

Jul 08, 2014 T11:31:49


SNAP-PAC-R1-W Controller Firmware

Updated Download

Details: The R9.4a firmware update for SNAP PAC controllers and brains is now available on the Opto 22 website. This update adds support for forthcoming HART protocol SNAP I/O modules and fixes issues with controller resets, communication handle operation, and Modbus communication. When installed along with the new R6.1a loader, R9.4a firmware also upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. See the SNAP PAC firmware README file for more information about fixes and improv

This download contains current firmware for the SNAP-PAC-R1-W controller. Current firmware for all SNAP PAC brains and controllers is available in a single download here.

Jul 08, 2014 T11:31:41


SNAP-PAC-R1 Controller Firmware

Updated Download

Details: The R9.4a firmware update for SNAP PAC controllers and brains is now available on the Opto 22 website. This update adds support for forthcoming HART protocol SNAP I/O modules and fixes issues with controller resets, communication handle operation, and Modbus communication. When installed along with the new R6.1a loader, R9.4a firmware also upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. See the SNAP PAC firmware README file for more information about fixes and improv

This download contains current firmware for the SNAP-PAC-R1 controller. Current firmware for all SNAP PAC brains and controllers is available in a single download here.

Jul 08, 2014 T11:31:32


SNAP-PAC-EB2-W Brain Firmware

Updated Download

Details: The R9.4a firmware update for SNAP PAC controllers and brains is now available on the Opto 22 website. This update adds support for forthcoming HART protocol SNAP I/O modules and fixes issues with controller resets, communication handle operation, and Modbus communication. When installed along with the new R6.1a loader, R9.4a firmware also upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. See the SNAP PAC firmware README file for more information about fixes and improv

This download contains current firmware for the SNAP-PAC-EB2-W brain. Current firmware for all SNAP PAC brains and controllers is available in a single download here.

Jul 08, 2014 T11:31:25


SNAP-PAC-EB2 Brain Firmware

Updated Download

Details: The R9.4a firmware update for SNAP PAC controllers and brains is now available on the Opto 22 website. This update adds support for forthcoming HART protocol SNAP I/O modules and fixes issues with controller resets, communication handle operation, and Modbus communication. When installed along with the new R6.1a loader, R9.4a firmware also upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. See the SNAP PAC firmware README file for more information about fixes and improv

This download contains current firmware for the SNAP-PAC-EB2 brain. Current firmware for all SNAP PAC brains and controllers is available in a single download here.

Jul 08, 2014 T11:31:16


SNAP-PAC-EB1-W Brain Firmware

Updated Download

Details: The R9.4a firmware update for SNAP PAC controllers and brains is now available on the Opto 22 website. This update adds support for forthcoming HART protocol SNAP I/O modules and fixes issues with controller resets, communication handle operation, and Modbus communication. When installed along with the new R6.1a loader, R9.4a firmware also upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. See the SNAP PAC firmware README file for more information about fixes and improv

This download contains current firmware for the SNAP-PAC-EB1-W brain. Current firmware for all SNAP PAC brains and controllers is available in a single download here.

Jul 08, 2014 T11:31:06


SNAP-PAC-EB1 Brain Firmware

Updated Download

Details: The R9.4a firmware update for SNAP PAC controllers and brains is now available on the Opto 22 website. This update adds support for forthcoming HART protocol SNAP I/O modules and fixes issues with controller resets, communication handle operation, and Modbus communication. When installed along with the new R6.1a loader, R9.4a firmware also upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. See the SNAP PAC firmware README file for more information about fixes and improv

This download contains current firmware for the SNAP-PAC-EB1 brain. Current firmware for all SNAP PAC brains and controllers is available in a single download here.

Jul 08, 2014 T11:30:56


SNAP-PAC-EB1 Brain Firmware

Updated Download

Details: None given.

This download contains current firmware for the SNAP-PAC-EB1 brain. Current firmware for all SNAP PAC brains and controllers is available in a single download here.

Jul 08, 2014 T10:59:30


Firmware for all SNAP PAC products

Updated Download

Details: The R9.4a firmware update for SNAP PAC controllers and brains is now available on the Opto 22 website. This update adds support for forthcoming HART protocol SNAP I/O modules and fixes issues with controller resets, communication handle operation, and Modbus communication. When installed along with the new R6.1a loader, R9.4a firmware also upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. See the SNAP PAC firmware README file for more information about fixes and improv

Firmware for all SNAP PAC products (single download)

Jul 07, 2014 T11:15:35


SoftPAC Controller Firmware

Updated Download

Details: The R9.4a firmware update for SNAP PAC controllers and brains is now available on the Opto 22 website. This update adds support for forthcoming HART protocol SNAP I/O modules and fixes issues with controller resets, communication handle operation, and Modbus communication. When installed along with the new R6.1a loader, R9.4a firmware also upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. See the SNAP PAC firmware README file for more information about fixes and improv

This download contains current firmware for the SOFTPAC software-based controller. Current firmware for all SNAP PAC brains and controllers is available in a single download here.

Jul 07, 2014 T11:15:24


G4EB2 Brain Firmware

Updated Download

Details: The R9.4a firmware update for SNAP PAC controllers and brains is now available on the Opto 22 website. This update adds support for forthcoming HART protocol SNAP I/O modules and fixes issues with controller resets, communication handle operation, and Modbus communication. When installed along with the new R6.1a loader, R9.4a firmware also upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. See the SNAP PAC firmware README file for more information about fixes and improv

Firmware for the G4EB2 brain

Jul 07, 2014 T11:14:36


SNAP-PAC-S1-W Controller Firmware

Updated Download

Details: The R9.4a firmware update for SNAP PAC controllers and brains is now available on the Opto 22 website. This update adds support for forthcoming HART protocol SNAP I/O modules and fixes issues with controller resets, communication handle operation, and Modbus communication. When installed along with the new R6.1a loader, R9.4a firmware also upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. See the SNAP PAC firmware README file for more information about fixes and improv

This download contains current firmware for the SNAP-PAC-S1-W controller. Current firmware for all SNAP PAC brains and controllers is available in a single download here.

Jul 07, 2014 T11:13:53


SNAP-PAC-S2-W Controller Firmware

Updated Download

Details: The R9.4a firmware update for SNAP PAC controllers and brains is now available on the Opto 22 website. This update adds support for forthcoming HART protocol SNAP I/O modules and fixes issues with controller resets, communication handle operation, and Modbus communication. When installed along with the new R6.1a loader, R9.4a firmware also upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. See the SNAP PAC firmware README file for more information about fixes and improv

This download contains current firmware for the SNAP-PAC-S2-W controller. Current firmware for all SNAP PAC brains and controllers is available in a single download here.

Jul 07, 2014 T11:13:46


SNAP-PAC-S2 Controller Firmware

Updated Download

Details: The R9.4a firmware update for SNAP PAC controllers and brains is now available on the Opto 22 website. This update adds support for forthcoming HART protocol SNAP I/O modules and fixes issues with controller resets, communication handle operation, and Modbus communication. When installed along with the new R6.1a loader, R9.4a firmware also upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. See the SNAP PAC firmware README file for more information about fixes and improv

This download contains current firmware for the SNAP-PAC-S2 controller. Current firmware for all SNAP PAC brains and controllers is available in a single download here.

Jul 07, 2014 T11:13:38


SNAP-PAC-S1 Controller Firmware

Updated Download

Details: The R9.4a firmware update for SNAP PAC controllers and brains is now available on the Opto 22 website. This update adds support for forthcoming HART protocol SNAP I/O modules and fixes issues with controller resets, communication handle operation, and Modbus communication. When installed along with the new R6.1a loader, R9.4a firmware also upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. See the SNAP PAC firmware README file for more information about fixes and improv

This download contains current firmware for the SNAP-PAC-S1 controller. Current firmware for all SNAP PAC brains and controllers is available in a single download here.

Jul 07, 2014 T11:13:31


SNAP-PAC-R2-W Controller Firmware

Updated Download

Details: The R9.4a firmware update for SNAP PAC controllers and brains is now available on the Opto 22 website. This update adds support for forthcoming HART protocol SNAP I/O modules and fixes issues with controller resets, communication handle operation, and Modbus communication. When installed along with the new R6.1a loader, R9.4a firmware also upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. See the SNAP PAC firmware README file for more information about fixes and improv

This download contains current firmware for the SNAP-PAC-R2-W controller. Current firmware for all SNAP PAC brains and controllers is available in a single download here.

Jul 07, 2014 T11:13:22


SNAP-PAC-R2 Controller Firmware

Updated Download

Details: The R9.4a firmware update for SNAP PAC controllers and brains is now available on the Opto 22 website. This update adds support for forthcoming HART protocol SNAP I/O modules and fixes issues with controller resets, communication handle operation, and Modbus communication. When installed along with the new R6.1a loader, R9.4a firmware also upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. See the SNAP PAC firmware README file for more information about fixes and improv

This download contains current firmware for the SNAP-PAC-R2 controller. Current firmware for all SNAP PAC brains and controllers is available in a single download here.

Jul 07, 2014 T11:13:10


SNAP-PAC-R1-W Controller Firmware

Updated Download

Details: The R9.4a firmware update for SNAP PAC controllers and brains is now available on the Opto 22 website. This update adds support for forthcoming HART protocol SNAP I/O modules and fixes issues with controller resets, communication handle operation, and Modbus communication. When installed along with the new R6.1a loader, R9.4a firmware also upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. See the SNAP PAC firmware README file for more information about fixes and improv

This download contains current firmware for the SNAP-PAC-R1-W controller. Current firmware for all SNAP PAC brains and controllers is available in a single download here.

Jul 07, 2014 T11:13:02


SNAP-PAC-R1 Controller Firmware

Updated Download

Details: The R9.4a firmware update for SNAP PAC controllers and brains is now available on the Opto 22 website. This update adds support for forthcoming HART protocol SNAP I/O modules and fixes issues with controller resets, communication handle operation, and Modbus communication. When installed along with the new R6.1a loader, R9.4a firmware also upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. See the SNAP PAC firmware README file for more information about fixes and improv

This download contains current firmware for the SNAP-PAC-R1 controller. Current firmware for all SNAP PAC brains and controllers is available in a single download here.

Jul 07, 2014 T11:12:54


SNAP-PAC-EB2-W Brain Firmware

Updated Download

Details: The R9.4a firmware update for SNAP PAC controllers and brains is now available on the Opto 22 website. This update adds support for forthcoming HART protocol SNAP I/O modules and fixes issues with controller resets, communication handle operation, and Modbus communication. When installed along with the new R6.1a loader, R9.4a firmware also upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. See the SNAP PAC firmware README file for more information about fixes and improv

This download contains current firmware for the SNAP-PAC-EB2-W brain. Current firmware for all SNAP PAC brains and controllers is available in a single download here.

Jul 07, 2014 T11:12:45


SNAP-PAC-EB2 Brain Firmware

Updated Download

Details: The R9.4a firmware update for SNAP PAC controllers and brains is now available on the Opto 22 website. This update adds support for forthcoming HART protocol SNAP I/O modules and fixes issues with controller resets, communication handle operation, and Modbus communication. When installed along with the new R6.1a loader, R9.4a firmware also upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. See the SNAP PAC firmware README file for more information about fixes and improv

This download contains current firmware for the SNAP-PAC-EB2 brain. Current firmware for all SNAP PAC brains and controllers is available in a single download here.

Jul 07, 2014 T11:12:36


SNAP-PAC-EB1-W Brain Firmware

Updated Download

Details: The R9.4a firmware update for SNAP PAC controllers and brains is now available on the Opto 22 website. This update adds support for forthcoming HART protocol SNAP I/O modules and fixes issues with controller resets, communication handle operation, and Modbus communication. When installed along with the new R6.1a loader, R9.4a firmware also upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. See the SNAP PAC firmware README file for more information about fixes and improv

This download contains current firmware for the SNAP-PAC-EB1-W brain. Current firmware for all SNAP PAC brains and controllers is available in a single download here.

Jul 07, 2014 T11:12:27


SNAP-PAC-EB1 Brain Firmware

Updated Download

Details: The R9.4a firmware update for SNAP PAC controllers and brains is now available on the Opto 22 website. This update adds support for forthcoming HART protocol SNAP I/O modules and fixes issues with controller resets, communication handle operation, and Modbus communication. When installed along with the new R6.1a loader, R9.4a firmware also upgrades newer SNAP PAC controllers to use high-capacity microSDHC cards. See the SNAP PAC firmware README file for more information about fixes and improv

This download contains current firmware for the SNAP-PAC-EB1 brain. Current firmware for all SNAP PAC brains and controllers is available in a single download here.

Jul 07, 2014 T11:12:17


PCI-AC5, PCIe-AC5, AC5, and G4AC5 Adapter Cards Data Sheet

Updated Document

Details: Added dimensional drawing for PCIe-AC5.

The PCI-AC5, PCIe-AC5, AC5, and G4AC5 adapter cards provide a PC interface for Opto 22 digital I/O mounting racks.

Jun 11, 2014 T14:30:50


PAC Project Basic and Professional Comparison Chart

Updated Document

Details: Clarification of SoftPAC brain support

This chart compares the features included in PAC Project Basic and Professional. These software suites are part of the SNAP PAC System.

May 16, 2014 T12:12:33


SNAP Power Monitoring Modules Data Sheet

Updated Document

Details: Corrected wiring diagram for SNAP-AIPM-3V module.

This data sheet describes the SNAP-AIPM, SNAP-AIPM-3, and SNAP-AIPM-3V analog input modules. These modules monitor AC voltage and current through a SNAP PAC rack-mounted controller or SNAP PAC brain.

The SNAP-AIPM monitors single-phase AC. The SNAP-AIPM-3 and SNAP-AIPM-3V monitor three-phase AC.

The SNAP-AIPM not only measures volts and amps simultaneously, but also calculates true power and volt-amps. From these values, you can easily calculate power factor. The SNAP-AIPM-3 and SNAP-AIPM-3V measure volts and amps and calculate true power and volt-amps for each of the three phases, and in addition calculate true power sums for all three.

May 13, 2014 T16:16:52


E1 and E2 Architecture and Migration Overview

Updated Document

Details: Updated references to developer toolkit and the SNAP PAC System.

The E1 and E2 brain boards are Ethernet-ready I/O and communication processors for digital and analog I/O systems. Designed as drop-in replacements for Opto 22's serial-based B1 and B2 brain boards, the E1 and E2 support both serial and Ethernet networking and multiple simultaneous protocols, including Optomux, OptoMMP, and Modbus/TCP.

This overview describes the system capabilities of the E1 and E2 and illustrates methods for migrating existing Optomux systems to use Ethernet networking, while preserving existing I/O racks, modules, and field wiring.

May 07, 2014 T17:06:53


PAC Display Basic

Updated Download

Details: PAC Project 9.3004 fixes bugs in PAC Display software which could cause Configurator and Runtime applications to crash. See the PAC Project README file for specific information and links to corresponding Opto 22 KB articles.

PAC Display Basic, part of the PAC Project Software Suite, is a user-friendly HMI package for building operator interface applications to communicate with the SNAP PAC System. Technicians and operators can monitor the system, respond to alarms, and interact as necessary using a graphical display.

PAC Display Basic is downloaded as part of the PAC Project Basic Software Suite, which also includes software for control programming.

If you are using multiple seats of PAC Display, we strongly recommend that you also purchase OptoOPCServer (either separately or as part of PAC Project Professional). OptoOPCServer manages all communication with the controller and reduces traffic on the control network.

Apr 30, 2014 T16:48:58


PAC Display Professional

Updated Download

Details: PAC Project 9.3004 fixes bugs in PAC Display software which could cause Configurator and Runtime applications to crash. See the PAC Project README file for specific information and links to corresponding Opto 22 KB articles.

PAC Display Professional, part of the PAC Project Professional Software Suite, is a user-friendly HMI package for building operator interface applications to communicate with the SNAP PAC System. Technicians and operators can monitor the system, respond to alarms, and interact as necessary using a graphical display.

PAC Display Professional is available as a separate application or as part of the PAC Project Professional Software Suite, which also includes software for control programming, OPC communication, and database connectivity.

The price for PAC Display Professional is for one seat. If you are using multiple seats of PAC Display, we strongly recommend that you also purchase OptoOPCServer (included in PAC Project Pro). OptoOPCServer manages all communication with the controller and reduces traffic on the control network.

Apr 30, 2014 T16:48:58


PAC Project Basic

Updated Download

Details: PAC Project 9.3004 fixes bugs in PAC Display software which could cause Configurator and Runtime applications to crash. See the PAC Project README file for specific information and links to corresponding Opto 22 KB articles.

The PAC Project Software Suite from Opto 22 provides all the software you need for industrial automation, remote monitoring, and data acquisition applications in any field. One of four components of the SNAP PAC System, PAC Project software is fully integrated with SNAP PAC controllers, brains, and I/O.

PAC Project Basic includes the following:

- PAC Control Basic for developing control programs to run on SNAP PAC controllers
- PAC Display Basic for creating HMIs for operators and technicians
- PAC Manager for configuration and maintenance

This product is a free download that includes software and documentation in Adobe Acrobat PDF format.

Apr 30, 2014 T16:48:58


PAC Project Professional

Updated Download

Details: PAC Project 9.3004 fixes bugs in PAC Display software which could cause Configurator and Runtime applications to crash. See the PAC Project README file for specific information and links to corresponding Opto 22 KB articles.

The PAC Project Software Suite from Opto 22 provides all the software you need for industrial automation, remote monitoring, and data acquisition applications in any field. One of four components of the SNAP PAC System, PAC Project software is fully integrated with SNAP PAC controllers, brains, and I/O.

PAC Project Professional includes the following:

- PAC Control Professional for developing control programs to run on SNAP PAC controllers
- PAC Display Professional for creating HMIs for operators and technicians
- PAC Manager for configuration and maintenance
- OptoOPCServer for communication with OPC 2.0 clients
- OptoDataLink for sharing SNAP PAC System data with databases
- SoftPAC for running control programs on a software-based programmable automation controller (PAC) designed for PC-based control

This product includes software and documentation in Adobe Acrobat PDF format on a CD. It also includes complete printed documentation.

Controller-level Redundancy:

PAC Project Professional includes support for controller-level redundancy when used with identical SNAP PAC S-series controllers and the SNAP PAC Redundancy Option Kit (part number SNAP-PAC-ROK). To use controller redundancy, controller firmware R9.1b or higher is required.

NOTE: OptoOPCServer and OptoDataLink are also compatible with Windows Server 2008 R2. (PAC Control, PAC Display, PAC Manager, and SoftPAC are not.)

Apr 30, 2014 T16:48:57

Cached at: 7/24/2014 5:19:02 AM

My.Opto22

All Opto22

Request Information
  • FREE Product Brochure
  • Product Demonstration
  • PreSales Engineering Assistance

Opto 22 Product Support

Opto 22 Product Support is FREE Monday through Friday 7 a.m. to 5 p.m. Pacific Time

Product Support Numbers:

Local: (951) 695-3080
Toll-Free: (800) 835-6786
Fax: (951) 695-3017
support@opto22.com

Products

None

Downloads

None

Documents

None