Certified Trainers
Opto 22 Certified Trainers in the United States and Canada
The following trainers are certified to teach Introduction to the SNAP PAC
System. Note that training held by Certified Trainers may not be free of
charge.
For legacy FactoryFloor system training, contact our
Training Department.
-
Opto 22 Headquarters - Temecula, California
-
Active
Automation Systems - Clermont, Florida
-
Advanced
Control Solutions - Marietta, Georgia
-
Controlled
Environment Structures, Inc - Mansfield, Massachusetts
-
DB
Computer Solutions and Automation - Alberta, Canada
-
Jeff Owens Engineering, Inc. - Irving, Texas
-
Martindale Associates - Bradford, Massachusetts
(See current classes below)
-
Northeast Automation Co., Inc. - Dover, New Hampshire
-
Opto-Solutions Engineering & Design, Inc. - Emmett, ID
Interested in becoming a Certified Trainer?
Contact us.
Training outside the U.S.
and Canada
Current classes at Martindale Associates (Bradford, MA)
Register for any class:
Phone: 978-372-2120 or toll-free (in the U.S.): 1-800-447-1191
Email: training@martindaleassoc.com
Location: 65 Avco Road, Unit M, Ward Hill Industrial Park, Bradford, MA 01835
Four-day, hands-on SNAP PAC System Training
When: April 28–May 1, 2008, 8:30 a.m. to 4:30 p.m. Lunch is included.
Cost: $600 per person ($1000 if hardware is not purchased through Martindale Associates)
Limited to six (6) people
Description: Complete hands-on introduction to PAC Project automation software, SNAP PAC controllers, and SNAP I/O.
One-day Jump-Start Class
When: April 22, 2008, 8:30 a.m. to 5:00 p.m. Lunch is included.
Cost: $225 per person
Description: For those with experience in automation control programming. An introduction to developing a control strategy and HMI using SNAP PAC controllers and I/O.
Lunch & Learn
When: Any Thursday, 11:00 a.m. to 1:00 p.m., or by appointment
FREE demonstration, lunch included
Description: Come for lunch and learn about the reliable hardware and easy-to-use software in Opto 22's SNAP PAC System.
|
 |
Opto 22 Headquarters
The training facility at Opto 22 headquarters has state-of-the-art student
workstations. Each station has its own personal computer and two monitors, one
showing the same information as the instructor's computer, and another for
displaying the student's work. Each workstation is equipped with Opto 22
hardware, including a SNAP PAC controller and SNAP I/O modules, a load panel,
and serial devices. Workstations and Opto 22 controllers are networked together
on a 100-Mbps Ethernet network.
Class size is limited to nine students so that each student receives individual
attention. With each student at his or her own training station, everyone gets
the chance to write and debug programs. Every student goes home with a training
manual documenting classroom exercises with step-by-step details.
Opto 22's high-quality training is also available
on-site for larger groups. Contact the Training
Department for more information.
Active Automation Systems
Thomas J. Nicodemo, an Opto 22 Certified trainer, has more than 20 years in the
fields of automation and systems development. During this period I have
developed programming and operator interfaces for industrial water filtration
plants as well as installations in HVAC and Building Automation. In addition, I
have developed and installed automation systems for technically demanding
Animal Habitats under the review of the American Zoological Association.
Training can be tailored specifically to you application and can be delivered to
you and your team at my location or on your site. Upgrades from outdated
automation systems to Opto 22 hardware and software is my specialty. Please
visit my website or contact me for additional information and to view some of
my past projects.
15916 Lake Orienta Court
Clermont, Florida 34711
Thomas J. Nicodemo
Phone: (352) 242-1760
activeautomationsystems@yahoo.com
home.earthlink.net/~tjn15916/
Advanced Control Solutions
Advanced Control Solutions (ACS), an Opto 22 partner and distributor, provides
the Opto 22 product line as well as in-house applications engineers for product
support. Other industrial products available from ACS include computers,
controllers, operator interfaces, statistical analysis software, touch screens,
computer enclosures, resolvers, encoders, and programmable limit switches. They
offer a wide range of services, including training, start-up and programming
assistance, design implementation, and vision inspection qualification.
Advanced Control Solutions (ACS) has recently opened its state-of-the-art
training center. They are equipped to offer hands-on training for up to eight
students. ACS also offers personal, customized training at their Marietta
location or they will arrange on-site training at your location.
1335 Capital Circle, Suite L
Marietta, GA 30067
Karen Pilliod
Phone: (770) 956-7202
Fax: (770) 956-7190
karen@advancedcontrolinc.com
www.advancedcontrolinc.com
Controlled Environment Structures, Inc
CES designs, installs, and maintains state of the art control systems for the
Food Processing, Cold Storage, Semiconductor, Pharmaceutical, Biotechnology,
Automotive, and Waste Water industries. Applications include HVAC, Cold
Storage, Batch/Process Control, Machine Control, Data Acquisition, Data
Collection, and Data Monitoring.
CES is an Opto 22 Certified Trainer, an Opto 22 Partner, and distributor of Opto
22 products, with a great deal of experience and knowledge of the Opto 22
products including the following systems: Pamux, Optomux, Cyrano/MMI, Standard
I/O, G4 I/O, Mistic I/O, Snap I/O, SNAP Ultimate I/O, Factory Floor Software
Suite, and SNAP Ultimate I/O Software. As an integrator, CES has installed and
completed numerous applications using the Opto 22 hardware and software
products.
Alfred Stadnicki, a degreed Electrical Engineer, has over ten years experience
with the Opto 22 product line and over seven years experience as a certified
trainer. The Controls group has over 50 combined years of automation experience
offering assistance in the following areas: system design, CAD drawings,
control panel fabrication, sequence of operation, software development,
installation/start-up, training, and ongoing support.
137 High Street
Mansfield, MA 02048
Training Coordinator: Alfred Stadnicki
Phone: (508) 339-4237
Fax: (508) 339-5400
astadnicki@cesweb.com
www.cesweb.com
DB Computer Solutions & Automation
Founded in 1986, DB Computer Solutions provides engineering services and new
product development for OEM and commercial users in Canada. Since 1999, DB
Computer Solutions has developed and engineered Opto 22 systems for the oil and
gas industry, production services, truck-mounted control systems, data
acquisition, and home automation. DB Computer Solutions has experience with
FactoryFloor, ioProject, and SNAP Ethernet Systems hardware.
DB Computer Solutions is an OptoCertified Trainer and a system integrator and
will assist customers throughout the development of their custom applications.
DB Computer Solutions & Automation
7003 Girard Rd
Edmonton, Alberta
T6B 2C4
Canada
Training Coordinator: David Brosseau
Phone: 780-628-2485
Fax: 780-461-5827
dave@dbcomputersolutions.ca
www.dbcomputersolutions.ca
Jeff Owens Engineering, Inc.
Jeff Owens is a registered professional engineer with twenty years experience in
industrial controls design and programming.
Our customers include both OEM's and end users in the oil and gas, water, and
industrial markets. Jeff Owens Engineering, Inc. is dedicated to maximizing a
customer's control system benefits with engineering, programming, testing,
commissioning, and training. Opto 22 training can be provided on site, and
customized to your applications if desired.
1137 Briar Oaks
Irving, TX 75060
Training Coordinator: Jeff Owens
Phone: (972) 467-7312
Fax: (972) 513-0366
training@PLCwizard.com
www.PLCwizard.com
Martindale Associates, Inc.
Martindale Associates was incorporated in 1976 as a distributor of plant
automation products for the New England region. Martindale Associates, a
manufacturers' representative and distribution company, specializes in
computer-integrated manufacturing for the factory floor. The Martindale
Associates facility contains a customer center that is used for training,
seminars, and user group meetings. This training center is equipped with
computer stations for one-on-one training with a certified instructor.
Martindale also arranges customized, on-site training. Martindale not only
offers Opto 22's full line of products, but offers engineering services and
training on them as well. Opto 22 seminars and Opto 22 user group meetings are
held frequently throughout the year at Martindale's customer center. Training
courses on Opto 22 hardware and software are held every month.
Ward Hill Industrial Park
65 Avco Road, Unit M
Bradford, MA 01835
Training Coordinator: Carol Pelland
Phone: (978) 372-2120
Phone: (800) 447-1191
Fax: (978) 372-6537
training@martindaleassoc.com
www.martindaleassoc.com
Northeast Automation, Co. Inc.
NACI is the leading integrator of OPTO-22 systems in America's great Northeast.
With more successful field installations than any distributor or integrator
east of the Mississippi, Northeast Automation of Dover, NH serves Defense,
Telecom, and Research companies. Northeast Automation is truly a countrywide
supplier of turnkey systems.
We supply complete manufacturing solutions, from small system retro-fits, to
entire plant-wide distributed control systems. We provide training on-site at
customer locations and arrange training at the OPTO-22 headquarters in
Temecula, CA.
Our customer list includes NASA, the FAA, Massachusetts Institute of Technology,
Draper Labs, Photonis-USA, Prima Lasers, Bausch and Lomb, and many, many more.
Let us help you.
210 Dover Point Road
Dover, NH 03820
Phone: (603) 661-1166
Training Coordinator: Tomas Coombs
Email: Automatinc@aol.com
www.NortheastAutomationUSA.com
Opto-Solutions Engineering & Design, Inc.
In addition to working as an Applications Engineer for Opto 22 Sales, our Certified Trainer Anthony Dern also worked with the Opto 22 Training Department. His technical knowledge, combined with continual interaction with customers at every technical level, helped structure and refine the FactoryFloor training class. He taught software training classes at Opto 22 for five years and concurrently taught Microsoft software at the University of California, Riverside for two years.
As an OptoPartner, distributor, and integrator, our experience with diverse applications in varied industries allows us to provide both textbook and real-world practice. We can offer standardized introduction courses, as taught at Opto 22, client-specific custom classes, or a hybrid of the two. Custom topics can include pointer tables, Modbus, serial protocols, and OPC server communication to any industry-standard graphical user interface.
The classes can be taught on-site or at Opto 22 headquarters. Over time the application may mature and change along with the personnel, but we are constant: as a consultant, integrator, and/or trainer, we can help maintain and enhance your Opto 22 system.
828 S. Washington Ave. Suite 108
Emmett, ID 83617
Phone: (951) 764-4711
Training Coordinator: James Wilcox
Email: training@opto-solutions.com
www.opto-solutions.com
|
|
Cart
Downloads
|