Opto 22

43044 Business Park Drive, Temecula, CA 92590 USA
Local & outside the USA:(951) 695-3000
Toll-Free within the USA:(800) 321-6786
Fax: (951) 695-3095
Email: sales@opto22.com

Would you like to have hands-on instruction with PAC Project software (PAC Control, PAC Display, OptoOPCServer, OptoDataLink, and PAC Manager) and Opto 22 SNAP hardware? If you can't come to Temecula for free training, you can learn with our self-paced tutorials.

OptoTutorials provide step-by-step instructions for specific features of PAC Project software, such as PID loop control. These tutorials are designed to be used with a SNAP PAC Learning Center. This fully operational bench kit provides a complete, standalone system for learning how to use a SNAP PAC controller, I/O, and PAC Project software.

If you don't have a SNAP PAC Learning Center, you may still find OptoTutorials useful. They contain general information and in some cases sample files that can be helpful with any application using PAC Project software. Tutorials are listed below.

Description/File NameVersionDate
OptoTutorial 1641: PID with PAC Control
1641_OptoTutorial_SNAP_PAC_PID.zip
This supplement to the SNAP PAC Learning Center Tutorial teaches you how to use proportional integral derivative (PID) loops with PAC Control software and a SNAP PAC R-series controller. This zip file includes the complete tutorial, sample files, and documentation.

The tutorial is designed to be used with a SNAP-PACLC learning center kit. If you don't have a Learning Center but are using PID with PAC Control, you will find conceptual information in the PDF document to be useful.
2.0a08/22/2012
SNAP PAC Learning Center Tutorial
1638_SNAP_PAC_Learning_Center.zip
The SNAP PAC Learning Center tutorial is a hands-on, learn-by-example training course developed for use with the SNAP-PACLC Learning Center kit.

Each part of the tutorial introduces aspects of the SNAP hardware and the PAC Project software suite. You'll learn to install and configure hardware, read and write to points, develop a control application (called a strategy), and create an HMI (human-machine interface) to interact with the controller and I/O.

This zip file includes the complete tutorial with sample files and documentation.
1.0b08/01/2008
OptoTutorial 1642: File Management and FTP
1642_OptoTutorial_File_Management_And_FTP.zip
This supplement to the SNAP PAC Learning Center tutorial teaches you how to use the file management and FTP features of SNAP PAC controllers.

This zip file includes the sample files and documentation.

The tutorial is designed to be used with a SNAP PAC Learning Center. If you don't have a Learning Center but are using SNAP PACs with ioControl, you will still find information in the PDF to be useful.
1.0a08/28/2006
OptoTutorial 1502: Using OptoGSM I/O
1502_OptoTutorial_OptoGSMIO.zip
Sample files for OptoGSMIO development kit.
 09/30/2004
OptoTutorial 1450: FTP and File Management
1450_OptoTutorial_FtpFileMgt.zip

This ZIP file contains the complete tutorial on using ioControl's FTP and file management features. This tutorial includes a PDF document and sample ioControl files and shows how to use the FTP and file management features of ioControl to create data files, read the data files from an FTP client, and then control points by uploading data to the SNAP Ultimate brain via FTP.

This is a hands-on tutorial for use with a SNAP Ultimate I/O Learning Center. If you have a SNAP PAC Learning Center, see File Management and FTP on SNAP PAC controllers instead.

04120702/17/2004

My.Opto22

All Opto22

Request Information
  • FREE Product Brochure
  • Product Demonstration
  • PreSales Engineering Assistance

Opto 22 Product Support

Opto 22 Product Support is FREE Monday through Friday 7 a.m. to 5 p.m. Pacific Time

Product Support Numbers:

Local: (951) 695-3080
Toll-Free: (800) 835-6786
Fax: (951) 695-3017
support@opto22.com

Products

None

Downloads

None

Documents

None