The B3000-HA is obsolete and no longer available. There is no direct replacement.
Depending on your application, you may be able to use a
B3000-B brain with RS-485 instead of twisted-pair Arcnet, or you may want to migrate to the
SNAP PAC System.
Please contact Opto 22
Pre-Sales engineers with details about your specific application so they can help recommend parts.
NOTE: If you already have a B3000-HA and need additional I/O, note that not all SNAP I/O modules are compatible with this brain.
See
Legacy and Current Product Comparison and Compatibility Charts for compatibility information.
The B3000-HA is obsolete and no longer available.
|
Power Requirements
|
5.0 - 5.2 VDC at 1.0A max.
|
|
Operating Temperature
|
0 to 70 °C, 5–95% humidity, non-condensing
|
|
CPU
|
16-bit Intel 80C196 I/O processor
|
|
Communications Interface
|
Node 0 and Node 1; twisted-pair ARCNET at 2.5 megabits per
second. Either port can be used, or both ports can be used for
redundant processor-to-I/O communication.
|
|
Data Rates
|
2.5 megabits per second; baud jumpers, although present, have
no effect.
|
|
Range (Multidrop Mode):
|
Up to 1,000 feet with up to 17 nodes. Repeaters and conversion
from Coax cable are commercially available.
|
|
Counter/Frequency Measurement
|
Maximum Rate: 20 kHz
Minimum Pulse Width: 10 µsec
|
|
Output Pulse
|
Maximum Rate: 500 Hz
Minimum Pulse Width: 1 msec
|
|
PID Update Rate
|
100 msec (for 1 to 8 PID loops)
|
|
LED Indicators
|
RUN (Power On), XMT (Activity), PGM (Program), and COM ports
|
|
Options: Jumper Selectable
|
Address, Node 0 Termination, Node 1 Termination
|
|
Cable
|
CAT-3 or CAT-5 UTP
|
The B3000-HA is obsolete and no longer available. There is no direct replacement.
The SNAP-B3000-HA processor is used to remotely control a mix of both analog and digital I/O modules using Opto 22's SNAP B-Series I/O mounting racks.
This technical note shows you how to set offset and gain for Opto 22 analog input modules. It includes instructions for the following Opto 22 hardware:
- groov RIO Universal I/O units, such as the GRV-R7-MM2001-10, and modules attached to groov EPIC processors, such as the GRV-EPIC-PR2
- Modules attached to SNAP PAC controllers and brains, such as the SNAP-PAC-R1, and Ethernet-based I/O units, such as SNAP-B3000-ENET
- Analog modules for mistic brains and bricks, such as the B3000 and B3000-HA
- Analog cards (such as the G4AIVA) for mistic high-density analog bricks (such as the G4HDAR)
This document is the Manufacturer's Declaration for the listed products as mentioned in the attachment - to which this confirmation refers - that they are in accordance with Directive 2014/35/EU.
No downloads are available for this product.
No videos or demos are available for this product.