Opto 22's website will be unavailable for scheduled maintenance on Thursday February 29, 2024 at 10:00PM PST for an estimated 4 hours. We apologize for any inconvenience this may cause.

G4OAC5FM
Hover over image to zoom in

G4OAC5FM

Availability: Obsolete
OBSOLETE G4 AC Output 12-140 VAC, 5 VDC Logic

Production Specification

*** NOTE: This part is obsolete and no longer available. ***
Please use G4OAC5 or contact Opto 22 Pre-Sales engineers for more information.

G4 I/O family

The G4OAC5FM is a digital AC output module with an output voltage range of 12–140 VAC, requiring a typical logic voltage of 5 VDC. It is compatible with Opto 22 brains.

This AC output module is equivalent to a single-pole, single-throw, normally open contact (Form A, SPST-NO). It includes a 4 amp fast-blow fuse.

Opto 22’s G4 AC output modules are used to control or switch AC loads. Each module provides up to 4000 volts of optical isolation (transient) between field outputs and the control side of the circuit, and each features zero voltage turn-on and zero current turn-off.

Typical applications for AC output modules include switching loads such as AC relays, solenoids, motor starters, heaters, lamps, and indicators.

 

Units

G4OAC5*
G4OAC5FM** [Obsolete]

G4OAC5A*
G4OAC5AFM** [Obsolete]

G4OAC5A5*
G4OAC5A5FM** [Obsolete]

G4OAC5MA*

G4OAC5AMA*

Nominal line voltage

VAC

120

120/240

120/240

120

120/240

Output voltage range

VAC

12–140

24–280

24–280

12–140

24–280

Key feature

Normally closed

Diagnostic
switch

Diagnostic
switch

Current rating:
At 45 °C ambient
At 70 °C ambient

 

A
A

 

3
2

 

3
2

 

3
2

 

3
2

 

3
2

UL Motor Load Rating

A

1.5

1.5

1.5

1.5

1.5

Isolation input-to-
output (transient):
   1 ms
   1 minute

volts

 

4000
1500

 

4000
1500

 

4000
1500

 

4000
1500

 

4000
1500

Off-state leakage at
nominal voltage (60 Hz)

mARMS

5

1.25/2.5

1.25/2.5

5

1.25/2.5

Nominal logic voltage

VDC

5

5

5

5

5

Logic voltage range

VDC

4–8

4–8

4–8

4–8

4–8

Logic pickup voltage

VDC

4

4

4

4

4

Logic dropout voltage

VDC

1

1

1

1

1

Logic input current at
nominal logic voltage

mA

12

12

12

12

12

Control resistance
(Rc in schematic)

ohms

220

220

220

220

220

One-cycle surge

A peak

80

80

80

80

80

Turn-on time @ 60 Hz

milliseconds

≤8.3***

≤8.3***

≤8.3***

≤8.3***

≤8.3***

Turn-off time @ 60 Hz

milliseconds

≤8.3****

≤8.3****

≤8.3****

≤8.3****

≤8.3****

Peak repetitive voltage

VAC

500

500

500

500

500

Minimum load current

mA

20

20

20

20

20

Output voltage drop
maximum peak

V

1.6

1.6

1.6

1.6

1.6

Operating frequency

Hz

25–65

25–65

25–65

25–65

25–65

dV/dT-off-state

V/micro-seconds

200

200

200

200

200

dV/dT-commutating

--

snubbed for
0.5 power
factor load

snubbed for
0.5 power
factor load

snubbed for
0.5 power
factor load

snubbed for
0.5 power
factor load

snubbed for
0.5 power
factor load

Temperature
   Operating:
   Storage:

 

°C
°C

 

-30 to +70
-30 to +85

 

-30 to +70
-30 to +85

 

-30 to +70
-30 to +85

 

-30 to +70
-30 to +85

 

-30 to +70
-30 to +85

Agency Approvals   UL, CE, CSA; UKCA UL, CE, CSA; UKCA CE, CSA; UKCA
 
UL, CE, CSA; UKCA UL, CE, CSA, RoHS; UKCA

* Compatible with Raspberry Pi.
** These parts are no longer available, please contact  Pre-Sales Engineering for more information.
*** One-half cycle maximum. Module turns on at the zero volt crossing of the AC sine wave.
**** One-half cycle maximum. Module turns off at the zero current crossing of the AC sine wave.

Opto 22 RoHS 3 Statement of Compliance - Restriction of Hazardous Substances

This document is a statement of compliance with the EU Directive 2015/863/EU, Restriction of Hazardous Substances (RoHS 3). This document lists Opto 22 products that comply with the substance restrictions of the RoHS 3 directive.

CSA Approval Document

This document lists all Opto 22 part numbers that have the Canadian Standards Association (CSA) approval.

CE Declaration: EMC

This document is the Manufacturer's Declaration for the listed products as mentioned in the attachment - to which this confirmation refers - that they are in accordance with the mentioned European, international and/or national standards and regulations.

CE Declaration: Low Voltage

This document is the Manufacturer's Declaration for the listed products as mentioned in the attachment - to which this confirmation refers - that they are in accordance with the mentioned European, international and/or national standards and regulations.

No downloads are available for this product.
No videos or demos are available for this product.