Products > GRV-OACI-12
GRV-OACI-12
Hover over image to zoom in

GRV-OACI-12

$535.00 (USA and Canada only)

Availability: In stock
AC discrete output, 12 channels, 12-250 VAC, channel-to-channel isolation
Data Sheet

Production Specification

Part of the groov EPIC® system, the GRV-OACI-12 digital output module can switch up to 12 separate 12-250 VAC loads. The module's 12 channels provide channel-to-channel isolation plus 300 volts of transient protection for sensitive control electronics from industrial field signals. To minimize transients during switching, AC outputs are zero voltage turn on and zero current turn off.ndustrial field signals. AC outputs are zero voltage turn on and zero current turn off to minimize transients during switching. The module cover includes an LED that indicates status and a touch-sensitive pad. Touch the pad and the groov EPIC processor displays information about the module, including specifications and a wiring diagram.

The GRV-OACI-12 offers a full set of features, including:
  • On/off state    
  • Output pulsing    
  • On/off totalization
  • Open circuit indication
The GRV-OACI-12 module mounts on a groov EPIC chassis, with a GRV-EPIC-PR1 processor and other discrete, analog, and serial groov I/O modules, to provide the mix of signals you need at any location.

NOTE: For projects that require only on/off switching, see the GRV-OACIS-12 module, a lower-cost option.

All groov I/O modules are UL/cUL listed and compliant with the ATEX, Low Voltage, and EMC CE and UKCA directives. Each module is factory tested twice before shipment and most modules are guaranteed for life.

Opto Products, like GRV-OACI-12, are ideal for OEMs and machine designers, process control, machine monitoring, power and energy monitoring, predictive maintenance, remote installations like water-wastewater and oil & gas, SCADA, and industrial internet of things applications.
Feature GRV-OACI-12 GRV-OACIS-12 GRV-OAC-12 GRV-OACS-12
Number of Channels 12 12 12 12
Channel-to-Channel Isolation ⬤ ⬤    
On/Off State ⬤ ⬤ ⬤ ⬤
On/Off Totalization ⬤   ⬤  
Output Pulsing/TPO ⬤   ⬤  
Quality Indication        
Watchdog Timeout ⬤ ⬤ ⬤ ⬤
 
Specification GRV-OACI-12 GRV-OACIS-12 GRV-OAC-12 GRV-OACS-12
Line Voltage 12–250 VAC 12–250 VAC 12–250 VAC 12–250 VAC
Current Rating (per channel) 0.5 A 0.5 A 0.5 A 0.5 A
Recommended Max. Fuse (fast) or Circuit Breaker 2 A 250 VAC / channel, 6 A 250 VAC common 2 A 250 VAC / channel, 6 A 250 VAC common 2 A 250 VAC / channel, 6 A 250 VAC common 2 A 250 VAC / channel, 6 A 250 VAC common
Minimum Load Current 20 mA 20 mA 20 mA 20 mA
Output Voltage Drop 1 V 1 V 1 V 1 V
Off-state Leakage at Nominal Voltage - 60 Hz 1.25 mA @240 VAC 0.7 mA @120 VAC 1.25 mA @240 VAC 0.7 mA @120 VAC 1.25 mA @240 VAC 0.7 mA @120 VAC 1.25 mA @240 VAC 0.7 mA @120 VAC
Peak Blocking Voltage 500 V 500 V 500 V 500 V
Operating Frequency 40 to 60 Hz, 400 Hz 40 to 60 Hz, 400 Hz 40 to 60 Hz, 400 Hz 40 to 60 Hz, 400 Hz
Turn-on Time ≤ 1/2 cycle (zero crossing) ≤ 1/2 cycle (zero crossing) ≤ 1/2 cycle (zero crossing) ≤ 1/2 cycle (zero crossing)
Turn-off Time ≤ 1/2 cycle (zero crossing) ≤ 1/2 cycle (zero crossing) ≤ 1/2 cycle (zero crossing) ≤ 1/2 cycle (zero crossing)
TPO Period (min, max, resolution) 0.1 seconds, 429496.7296 seconds, 0.001 seconds N/A 0.1 seconds, 429496.7296 seconds, 0.001 seconds N/A
Quality Indications None None None None
Isolation (field-to-logic) 300 V working, 1500 V transient (1 minute) 300 V working, 1500 V transient (1 minute) 300 V working, 1500 V transient (1 minute) 300 V working, 1500 V transient (1 minute)
Isolation (channel-to-channel) 300 V working 300 V working None None
Number of Channels 12 12 12 12
Chassis Power Consumption 1.3 W 1.3 W 1.3 W 1.3 W
Minimum groov EPIC Firmware Version 1.0.0 1.0.0 1.0.0 1.0.0
Minimum PAC Project Version 10.0000 10.0000 10.0000 10.0000
Minimum Library Package for CODESYS Version 1.0.0.0 1.0.0.0 1.0.0.0 1.0.0.0
Wire Size 28–14 AWG 28–14 AWG 28–14 AWG 28–14 AWG
Wire Strip Length 0.315–0.354 inches (8–9 mm) 0.315–0.354 inches (8–9 mm) 0.315–0.354 inches (8–9 mm) 0.315–0.354 inches (8–9 mm)
Torque, connector screw 2.5 in-lb (0.28 N-m) 2.5 in-lb (0.28 N-m) 2.5 in-lb (0.28 N-m) 2.5 in-lb (0.28 N-m)
Torque, hold-down screw 3.5 in-lb (0.4 N-m) 3.5 in-lb (0.4 N-m) 3.5 in-lb (0.4 N-m) 3.5 in-lb (0.4 N-m)
Temperature (operating) -20 °C to +70 °C -20 °C to +70 °C -20 °C to +70 °C -20 °C to +70 °C
Temperature (storage) -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C
Relative Humidity (non-condensing) 5–95% 5–95% 5–95% 5–95%
MTBF (minimum, 25°C) 1.2 Mhrs 1.2 Mhrs 1.2 Mhrs 1.2 Mhrs
Agency Approvals UL/cUL (Class 1, Div 2)a; CE: ATEX (Category 3, Zone 2) and RoHS; DFARS; CB Scheme; UKCA
Warranty Lifetime

a For use in hazardous locations, equipment must be mounted in an enclosure that meets the requirements of the National Electrical Code, ANSI/NFPA 70, and ANSI/ISA-61010-1 (82.02.01).

Opto Products are ideal for OEMs and machine designers, process control, machine monitoring, power and energy monitoring, predictive maintenance, remote installations like water-wastewater and oil & gas, SCADA, and industrial internet of things applications.

2231

groov 12-250 VAC Output Modules Data Sheet

groov® 12-250 VAC output modules are part of Opto 22's groov EPIC® System. This document includes descriptions, specifications, and wiring and dimensional diagrams for the following part numbers:

View

RM_GROOV_IO

groov I/O Modules Firmware Release Notes

This document lists the latest updates to the firmware for groov I/O modules. It includes information on new features, enhancements, and bug fixes.

List of groov I/O module firmware download pages

Note: This document was formerly called a readme. The name was changed to more accurately describe its content.

View

2370

UKCA Declaration of Conformity (groov EPIC and groov RIO)

This document is the Manufacturer's Declaration of Conformity for groov EPIC and groov RIO and their accessories, in accordance with the rules, regulations and standards of the United Kingdom. The models cited have been tested to the essential requirements listed in the Standards section, and fully comply with the legislation as listed in UK Legislation section.

View

2330

ATEX Letter of Conformity for groov EPIC

This ATEX Letter of Conformity is provided to support CE Declaration of Conformity (groov EPIC and groov RIO), form 2261.

View

2261

Declaration of Conformity (groov EPIC and groov RIO)

This document is the Manufacturer's Declaration of Conformity for the products listed herein, in accordance with European, international, and/or national standards and regulations.

View

GRV-OACI-12 Module Firmware

This download contains current firmware for the GRV-OACI-12 module. For a list of bug fixes and enhancements included in this firmware, see the groov I/O Modules Firmware Release Notes.

You can download previous versions of the firmware by clicking on the corresponding link: 1.3c, 1.3b, 1.3a, 1.0l

View

CAD Drawing: groov I/O Module

This ZIP file includes drawings in a variety of file formats (pdf, dwg, stp) that apply to all groov I/O modules.

Note: These drawings do not apply to groov RIO modules.

View

CAD Drawings: groov EPIC and groov RIO I/O wiring

This ZIP file contains I/O wiring diagrams for groov EPIC I/O modules and groov RIO models, in DWG format.

View
No videos or demos are available for this product.

Related Accessories