M4RTU
Hover over image to zoom in

M4RTU

Availability: Obsolete
OBSOLETE Opto 22 Modular Controller for FactoryFloor systems

Production Specification

*** NOTE: This product is obsolete and no longer available, due to the unavailability of essential parts. ***

NOTE: For new development, we recommend a SNAP PAC programmable automation controller and the PAC Project software suite. SNAP PAC controllers are more powerful and less expensive.

For system expansion or modernization, you can migrate to the SNAP PAC System from FactoryFloor. Learn how to migrate.

M4RTU (Obsolete)

Item

Specification

CPU

32-bit Motorola 68020 processor
16-bit 80C196 I/O processor
IEEE floating-point math

CPU clock frequency

16.67 MHz

Memory:
 RAM
 Flash EEPROM on controller
 Flash EEPROM on brain board

 

1 MB with battery backup (user programs & data)
1 MB (firmware and user programs) in Rev. 2 controllers (256 KB in older ones.)
128 KB (I/O firmware)

RAM/clock battery

3.6-volt lithium, non-rechargeable

I/O:
 Base unit
 Extender unit
 Expansion

 

8 digital, 4 analog, multifunction
Adds 8 digital, 4 analog, multifunction
Via RS-485 ports, using Opto 22 I/O

Communication:
 Base unit
 Expansion
 Modem support

 

1 RS-232 and 1 RS-485/422 port
Via daughter cards: configurable serial ports, Ethernet, ARCNET
Direct, lease, and radio

Real-time clock

Clock/calendar, Epson 62421A with battery backup

Power requirements

5 VDC at 3.5 A (maximum)
24 VDC at 300 mA (maximum)

Typical operating temperature

-20 °C to 70 °C

Storage temperature

-40 °C to 85 °C

Humidity

5% to 95% relative humidity

Software

FactoryFloor (OptoControl, OptoDisplay, and OptoServer)
Classic Software (Cyrano, Mistic MMI, and MDS)

System monitors:
 Host communications
 Watchdog timers
 RAM battery backup low
 Operating temperature

 

Detect communication errors from processor, I/O, etc.
Detect main power supply operation
Detects program corruption (checksum RAM test)
Detects temperature

M4 Controller Ethernet Card Data Sheet

The M4SENET-100 is an Ethernet network interface card designed for Opto 22's M4 series controllers, such as the SNAP-LCM4 and the M4RTU.

M4RTU Data Sheet

*** NOTE: This product is obsolete and no longer available, due to the unavailability of essential parts. ***

NOTE: For new development, we recommend a SNAP PAC programmable automation controller and the PAC Project software suite. SNAP PAC controllers are more powerful and less expensive. For system expansion or modernization, you can migrate to the SNAP PAC System from FactoryFloor. Learn how to migrate.
 
The Modular M4RTU Controller features powerful communications capabilities, built-in diagnostics, and 32-bit processors.

OptoControl-based Controller Firmware README

This README file lists revision changes made to the firmware used in the following Opto 22 controllers that run OptoControl strategies: G4LC32, G4LC32SX, M4, M4IO, M4RTU, SNAP-LCSX, SNAP-LCSX-PLUS, and SNAP-LCM4.

Cyrano-based Controller Firmware README

This README file lists revision changes made to the firmware used in the following Opto 22 controllers that run Cyrano strategies: G4LC32, G4LC32SX, G4LC32ISA, G4LC32ISA-LT, M4, M4IO, M4RTU, M4RTU Rev.2, SNAP-LCM4, SNAP-LCSX, and SNAP-LCSX-PLUS.

M4RTU/M4IO User's Guide

This reference manual provides complete specifications and instructions to set up and install an M4RTU or M4IO controller.

Mistic 200 Family Data Book

*** The Mistic family of controllers is OBSOLETE and no longer available. ***
Mistic 200 Family Data Book

UKCA Declaration of Conformity (ATEX, EMC, LVD, RoHS)

This document is the Manufacturer's Declaration of Conformity for the products listed herein, in accordance with the rules, regulations and standards of the United Kingdom. The models cited have been tested to the essential requirements listed in the Standards section, and fully comply with the legislation as listed in UK Legislation section.

M4RTU/M4IO Important Notes

The M4RTU/M4IO controller was re-engineered in June 2007 because older parts are no longer available. This document contains important notes for the re-engineered controllers, which can be recognized by the Rev. 2 sticker on the unit.

CSA Approval Document

This document lists all Opto 22 part numbers that have the Canadian Standards Association (CSA) approval.

CE Declaration: EMC

This document is the Manufacturer's Declaration for the listed products as mentioned in the attachment - to which this confirmation refers - that they are in accordance with the mentioned European, international and/or national standards and regulations.

CE Declaration: Low Voltage

This document is the Manufacturer's Declaration for the listed products as mentioned in the attachment - to which this confirmation refers - that they are in accordance with the mentioned European, international and/or national standards and regulations.

BETA firmware for OptoControl-based controllers

This download contains BETA firmware for Opto 22 controllers running OptoControl strategies.

Beta Version Disclaimer:

OptoControl is a legacy product, which is no longer getting new features and no longer going through official release cycles. Beta versions of the firmware are made available as-is for those who need the related bug fixes.

In general, beta versions will include bug fixes since the last official release, without adding new features. This usually enhances product stability without introducing unwanted side effects. Beta versions for legacy products have been through basic testing only, and will not be formally tested.

Ultimately, the choice will be up to the user as to whether the benefit of using the beta version is worth the risk. We simply want to make the beta version available so that you have options.

M4RTU Controller Firmware

This download contains the current firmware for the M4RTU controller. The download also includes firmware for SNAP-LCM4, SNAP-LCSX, SNAP-LCSX-PLUS, M4, and other Opto 22 OptoControl-based controllers.

AutoCAD Drawings

This file contains AutoCAD drawings of Opto 22 products dating from 1988 to 2003. These are the same drawings that have been available on our BBS. Included is an Excel file describing the file names and relevant Opto 22 part numbers.

Controller Time Synchronization Application

This software application updates the internal clock for an Ethernet-connected Opto 22 controller. The application runs in Windows at the command prompt, and can update controller clocks regularly or just once.

This application is used with the following Opto 22 controllers:

  • SNAP PAC S- and R-Series
  • Ultimate I/O (UIO)
  • SNAP-LCE
  • SNAP-LCM4
  • M4
  • M4RTU
  • M4IO
This download is freeware. Before downloading, read the Legal Agreement.

Cyrano Flash Firmware

Current release of 16-bit Cyrano firmware. This firmware is required to run Cyrano strategies on legacy Opto 22 controllers.

Cyrano Flash Firmware and Installation Utility

Current release of 16-bit Cyrano firmware. This firmware is required to run Cyrano strategies on Opto 22 controllers. This file installs the Opto 22 Flash 200 utility (version R3.1i) and Cyrano firmware (version R3.2j).

Cyrano Software

The predecessor to OptoControl, Cyrano is a DOS application for flowchart control programming. This software does not run under Windows NT.

Ethernet Controller Driver - Linux

A demo that's like the OptoTerm program for Windows. It demonstrates how to retrieve strategy information from the controller and other simple information. This package only supports an Ethernet interfaced controller (SNAP-LCM4, M4, or M4RTU).

Mistic MDS

Mistic MDS is the predecessor to OptoServer. It is a DDE-only server for the Cyrano tagname database that operates under Windows 3.x.

Mistic MMI

Mistic MMI is the predecessor to OptoDisplay. It is a 16-bit Windows 3.x Man-Machine Interface package that is tightly integrated with Cyrano.

OptoTerm Utility for OptoControl Controllers

This download contains a full installation of the most recent version of OptoTerm, a software utility for:

  • Downloading new firmware to an OptoControl-based controller.
  • Viewing the status of an OptoControl-based controller.

No videos or demos are available for this product.