SNAP-ODC-HDB-FM

$249.00 (USA and Canada only)

Availability: In stock
Fused breakout rack for SNAP 32-channel digital (discrete) output modules, Factory Mutual approved

Please call (800) 321-6786 to order.

SNAP-ODC-HDB-FM

Production Specification

The SNAP-ODC-HDB-FM breakout rack is used with one 32-channel digital output module, such as the SNAP-ODC-32-SNK-FM or SNAP-ODC-32-SRC-FM. The breakout rack provides LED indicators and easily accessible fused connectors for output points.

The SNAP-ODC-HDB-FM is Factory Mutual approved. If you do not need FM approval, choose the SNAP-ODC-HDB rack instead.

For reference: Modules, Cables, and Breakout Boards Compatibility Charts

Build your system in the SNAP I/O Configurator.

SNAP-ODC-HDB and SNAP-ODC-HDB-FM Breakout Racks for High-Density Digital Output Modules

Used with

SNAP-ODC-32-SRC, SNAP-ODC-32-SRC-FM,
SNAP-ODC-32-SNK, and SNAP-ODC-32-SNK-FM

Connectors

40-pin header; connects to 32-point sourcing or sinking module using
SNAP-HD-BF6 header cable.
32 signal output connectors; each signal connector has a corresponding common connector.
For each zone of 8 signal outputs, 1 connection for either module common or field common.
Wire size for field connectors: 16-20 AWG

Indicators

1 LED for each signal output (32 signal LEDs total)
1 power status LED for each zone of 8 signal outputs (4 power LEDs total)

Fusing

1 A fuses; 1 fuse for each signal output (32 signal fuses total)
Replace with Pudenz 1 A automobile mini-fuse or equivalent.

Jumpers

For each zone of 8 signal inputs, 1 jumper controls whether module common or field common is used.

Voltage

32 VDC maximum, 12-24 VDC nominal

Agency Approvals

SNAP-ODC-HDB: UL, CE, RoHS, DFARS

SNAP-ODC-HDB-FM: FM, CE, RoHS, DFARS

Warranty

30 months from date of manufacture

SNAP TEX Cables and Breakout Boards Data Sheet

SNAP TEX cables and breakout boards are part of the SNAP TEX family of wiring and mounting accessories. These parts save time and expense during installation, maintenance, and debugging by reducing the time and effort required to wire field devices to SNAP I/O modules.

SNAP High-Density Digital Module User's Guide

This guide covers how to install and test SNAP 16-channel and 32-channel digital modules. These modules provide 16 or 32 points of digital input or digital output in the same space as a 4-channel digital module. They are ideal for OEMs and for anyone who needs up to 512 digital points on a single mounting rack.

Opto 22 RoHS 2 Statement of Compliance - Restriction of Hazardous Substances

This document is a statement of compliance with the EU Directive 2011/65/EU, Restriction of Hazardous Substances (RoHS 2). This document lists Opto 22 products that comply with the substance restrictions of the RoHS2 directive.

SNAP-ODC-HDB Jumper Settings

This document shows the jumper settings for the SNAP-ODC-HDB, a breakout board for high-density digital output modules. Also provided are dimensions for installing the board.

FM Approval Document

This document lists all Opto 22 part numbers that have Factory Mutual (FM) approval.

No downloads are available for this product.

Video: SNAP PAC System Overview

This overview describes the four integrated components of the SNAP PAC system: software, controllers, brains and I/O. This hardware and software system is designed for industrial control, remote monitoring and data acquisition.

Video: SNAP TEX Wiring and Mounting Accessories

A quick overview of SNAP TEX wiring and mounting accessories.