Opto 22's website will be unavailable for scheduled maintenance on Thursday February 29, 2024 at 10:00PM PST for an estimated 4 hours. We apologize for any inconvenience this may cause.

M4-Series Controller Ethernet Card Installation Guide

Documents/Manuals - 1156
File Size: 710 KB
Updated: 07/30/2019

The M4SENET-100 is an Ethernet network interface card designed for Opto 22’s legacy M4-series industrial controllers, such as the SNAP-LCM4 and the M4RTU.

Note: M4 controllers are not recommended for new development. For new development, use SNAP PAC S-series controllers.