Opto.mib is a management information base (MIB) file that describes the Opto 22 network objects, such as SNAP Ethernet-based brains or controllers, that can be managed using the Simple Network Management Protocol (SNMP). If you are using SNAP Ethernet systems with an SNMP v2.0c-compliant management system such as Computer Associates' Unicenter®, Hewlett-Packard's OpenView®, or IBM's Tivoli®, you will need to download this MIB file.
This MIB file is used with SNMP 2.0c-compliant management systems. If your management system uses SNMP 1.0, download OPTOMIB1 instead.
The following firmware is required for use with this v2.0c MIB:
SNAP Device |
Firmware |
SNAP-PAC-S1 & SNAP-PAC-S2 controllers |
8.2a |
SNAP-PAC-R1 & SNAP-PAC-R2 controllers |
8.2a |
SNAP-PAC-EB1 & SNAP-PAC-EB2 brains |
8.2a |
Download