Only the first 50 configured devices or computed tags appear in groov View for editing or deletion

Applies To:

groov View running on:

GRV-EPIC-PR1
GRV-EPIC-PR2
GROOV-SVR-WIN
GROOV-SVR-WIN-BASE
GROOV-SVR-WIN-SNAP

Versions Affected:

GRV-EPIC-PR1, GRV-EPIC-PR2: All versions prior to 3.6.0
All others: R3.0 to R4.5b

Resolved In Version:

GRV-EPIC-PR1, GRV-EPIC-PR2: 3.6.0
All others: R4.5c

Symptoms:

If you have more than 50 configured devices or computed tags in your groov View project, you may notice that only the first approximately 50 items appear in the Configure Devices and Tags dialog window for editing or deletion.

Workaround:

You can force groov View to load the next batch of items in increments of 50:

In the Configure Devices and Tags dialog window, scroll to the bottom of the list.
Click the last entry in the list to select it.
Press the Down Arrow key with the last entry selected to load the next 50 items.
Scroll back up to the top of the list and press the Up Arrow key, making the previous batch of 50 items visible.
Edit or delete those items as needed, and repeat these steps to view the next batch of 50 items if applicable.

Resolution:

Opto 22 has resolved this issue.

Questions?

Contact: Opto 22 Product Support.
Phone: 800-835-6786 or 951-695-3080
Email: support@opto22.com

DISCLAIMER

This Opto 22 Knowledge Base ('OptoKB') article is intended to provide general technical information on a particular subject or subjects and is not an exhaustive treatment of such subjects. Accordingly, the information in this OptoKB article is not intended to constitute application, design, software, or other professional engineering advice or services. Opto 22 may modify the OptoKB articles at any time. Before making any decision or taking any action which might affect your equipment, you should consult a qualified professional.

OPTO 22 DOES NOT WARRANT THE COMPLETENESS, TIMELINESS, OR ACCURACY OF THE DATA CONTAINED IN THIS OPTOKB ARTICLE AND MAY MAKE CHANGES THERETO AT ANY TIME AT ITS SOLE DISCRETION WITHOUT NOTICE. FURTHER, ALL INFORMATION CONVEYED HEREBY IS PROVIDED TO USERS 'AS IS.' IN NO EVENT SHALL OPTO 22 BE LIABLE FOR ANY DAMAGES OF ANY KIND INCLUDING DIRECT, INDIRECT INCIDENTAL, CONSEQUENTIAL, LOSS PROFIT, OR DAMAGE, EVEN IF OPTO 22 HAS BEEN ADVISED ON THE POSSIBILITY OF SUCH DAMAGES.

OPTO 22 DISCLAIMS ALL WARRANTIES WHETHER EXPRESSED OR IMPLIED WITH RESPECT TO THE INFORMATION (INCLUDING HARDWARE, SOFTWARE, AND/OR FIRMWARE) PROVIDED HEREBY, INCLUDING THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, MERCHANTIBILITY, AND NON-INFRINGEMENT. Note that certain jurisdictions do not sanction the exclusion of implied warranties: thus, this disclaimer may not apply to you.