Resources & Tools


















Showing results 1 - 25 of 3515

documents/data sheets - 1639

Published:

Opto 22 Document

SNAP PAC Learning Center Data Sheet

The SNAP PAC Learning Center is a fully functioning package of Opto 22 hardware and software designed to help you learn how to use the SNAP PAC System to meet your control, monitoring, and data acquisition needs.  

documents/manuals - 1701

Published:

Opto 22 Document

PAC Control Command Reference

This document provides detailed information on commands used in PAC Control, part of the PAC Project Software Suite. PAC Control is control programming software for the Opto 22 SNAP PAC System.

documents/manuals - 1711

Published:

Opto 22 Document

Legacy Edition, PAC Control Command Reference

This document is the Legacy Edition of the PAC Control Command Reference. This guide includes all the commands that apply to both SNAP PAC and legacy hardware. Use this guide if your PAC Control...more

documents/data sheets - 1949

Published:

Opto 22 Document

SNAP Reed Relay Modules Data Sheet

The SNAP Reed Relay modules use reed relays and do not provide optical isolation. Current rating depends on the voltage the module is used with. These modules were designed for a very low-voltage DC load...more

documents/release notes - rm_grv_epic_pr1

Published:

Opto 22 Document

GRV-EPIC-PR1 Firmware Update Readme

Readme for the latest update to the groov EPIC processor, part number GRV-EPIC-PR1. Includes information on new features, enhancements, and bug fixes for each application in the processor: GRV-EPIC...more

knowledge base - KB87494

Published:

Opto 22 Knowledgebase

GRV-EPIC-PR1 host task locks up when examining errors on certain channel types

When you attempt to view the error messages in the processor's Message Queue that involve some of the new types of groov modules, the host task may lock up; in addition, PAC Control or PAC Terminal...more

knowledge base - KB87424

Published:

Opto 22 Knowledgebase

No warning generated in error queue if strategy I/O configuration does not match physical I/O

For I/O on a GRV-EPIC-PR1 I/O unit, no warnings are generated in the control engine error message queue when a strategy is run with an I/O configuration that specifies a channel type that is not...more

knowledge base - KB87464

Published:

Opto 22 Knowledgebase

Replace Tags for Entire Project misses historical log's "String Name" tag

The Replace in Entire Project feature (PAC Display Configurator > Edit > Replace > Search Scope = Entire Project, Search For = Control Engine) doesn't update control engine tag in the...more

knowledge base - KB87457

Published:

Opto 22 Knowledgebase

PAC Display Configurator won't finish loading project

Sometimes when you open a project in PAC Display Configurator, you'll see the typical "loading" messages (for example, "Verifying and reading in data" or "Reading internal...more

knowledge base - KB83184

Published:

Opto 22 Knowledgebase

OptoDataLink connection error: The ConnectionString property has not been initialized

If your OptoDataLink project has data links that connect to different databases, when you view or try to modify the links, OptoDataLink may display a connection error message that reads, "Could...more

documents/release notes

Published:

Opto 22 Document

PAC Project R10.0 Release Notes

Release Notes for PAC Project Software Suite, version 10.0. PAC Project Basic provides control programming, HMI development and runtime, and configuration and utility programs. PAC Project...more

documents - 2135

Published:

Opto 22 Document

.NET OptoMMP SDK for groov EPIC and SNAP PAC

The .NET OptoMMP Software Development Kit (SDK) for groov EPIC and SNAP PAC provides an easy-to-use interface for a developer to quickly create an Ethernet I/O-based application for Opto 22 products...more

documents - 2148

Published:

Opto 22 Document

.NET Controller SDK for groov EPIC and SNAP PAC Technical Note

The .NET Controller Software Development Kit (SDK) for groov EPIC and SNAP PAC provides a simple, easy-to-use interface for a developer to quickly create an application to access objects in a PAC...more

documents/data sheets - 1487

Published:

Opto 22 Document

OptoOPCServer Data Sheet

This data sheet describes OptoOPCServer, part of the PAC Project software suite. OptoOPCServer is an OPC 2.0-compliant server that connects your OPC client software with Opto 22 Ethernet-based controllers and I/O units.

documents/manuals - 1712

Published:

Opto 22 Document

Legacy Edition, PAC Display User's Guide

This document is the Legacy Edition of the PAC Display User's Guide. This guide includes all the information you need if you are using both SNAP PAC hardware and older Opto 22 hardware with PAC...more

documents/manuals - 1702

Published:

Opto 22 Document

PAC Display User's Guide

This guide shows you how to use PAC Display, part of the PAC Project Software Suite, to create human-machine interfaces (HMIs) for your SNAP PAC System.

documents/manuals - 2045

Published:

Opto 22 Document

SoftPAC Quick Start Guide

SoftPAC is a software-based programmable automation controller (PAC) designed for PC-based control. This short document shows you how to configure and run SoftPAC. SoftPAC is programmed with PAC...more

knowledge base - KB87492

Published:

Opto 22 Knowledgebase

PAC Control: Chart ".$cht contains an incorrect path" warning

When a strategy resides on a drive other than your computer's C:\ drive, PAC Control will display a warning message when you go into Debug mode (Mode > Debug). The message shows the path and...more

documents/manuals - 1700

Published:

Opto 22 Document

PAC Control User's Guide

This document shows you how to use PAC Control, part of the PAC Project Software Suite, to develop control programs to run on SNAP PAC controllers. These programs, called strategies, contain the...more

documents/manuals - 1710

Published:

Opto 22 Document

Legacy Edition, PAC Control User's Guide

This document is the Legacy Edition of the PAC Control User's Guide. It includes all the information you need to use PAC Control with both SNAP PAC hardware and legacy hardware. Use this guide...more

documents/manuals - 1704

Published:

Opto 22 Document

PAC Manager User's Guide

This guide shows you how to use PAC Manager, part of the the PAC Project Software Suite, to assign IP addresses, configure I/O, and inspect and maintain Opto 22 SNAP PAC hardware.