Groov Forum - Published: Mary, Is there going to be an SQL server on GROOV? If not is there going to be a direct SQL connection from PacControl to SQL through the GROOV? Is there going to be global and or private variables...moreMary, Is there going to be an SQL server on GROOV? If not is there going to be a direct SQL connection from PacControl to SQL through the GROOV? Is there going to be global and or private variables available in the GROOV HMI? Is there going to be scripting in the GROOV HMI?... <less
Groov Forum - Published: I understand based on something I read in one of the mag articles that GROOV will have an SQL database in it, is that true? If so, what DB tools or anything else you can tell me about this feature? Also,...moreI understand based on something I read in one of the mag articles that GROOV will have an SQL database in it, is that true? If so, what DB tools or anything else you can tell me about this feature? Also, will the GROOV have a ported version of SoftPac eventually? I assume since this is an embedded system that any other apps will have to come via Opto22 development, right? What embedded CPU is this based on?... <less
Groov USB Ports Forum - Published: Hello All, I am curious bout the usb ports on the front of the groov-ar1. What exactly can I use them for? Can I hook up an external harddrive to the groov box and use node-red to put data on there? Is...moreHello All, I am curious bout the usb ports on the front of the groov-ar1. What exactly can I use them for? Can I hook up an external harddrive to the groov box and use node-red to put data on there? Is there a mapped location for the usb ports? (I would like to use node-red to put information onto an external hard drive if possible using the file node as I believe its called.)... <less
Groov log details on a groov screen Forum - Published: A lot of people have been asking for this - the ability to put select parts of the groov log on a groov page. (I think the engineers are working a groov gadget to do this). @torchard has done a sweet...moreA lot of people have been asking for this - the ability to put select parts of the groov log on a groov page. (I think the engineers are working a groov gadget to do this). @torchard has done a sweet write-up over in the Node-RED forum on how to get all or just the bits you are interested in of the log displayed on a groov page; Putting groov log into a groov data store - Read intro on first post! Node-RED Edit by @Beno - Please use this with some caution. The log fil...... <less
Groov View 4.1c Bricked Groov Box Forum - Published: Good Morning All, I recently updated to Groov View 4.1c. Unfortunately when I updated it seems to have bricked my groov box. I can ping it, but I can’t get to any of the pages, or the admin. Any advice? ...Good Morning All, I recently updated to Groov View 4.1c. Unfortunately when I updated it seems to have bricked my groov box. I can ping it, but I can’t get to any of the pages, or the admin. Any advice? ... <less
Log in and out of Groov and Groov Updates Forum - Published: Where can I find a list of updates for groov? I want to see what has all changed/updated since my current revision. I have a client that is using 3 groov boxes to monitor 3 sites. They are very pleased...moreWhere can I find a list of updates for groov? I want to see what has all changed/updated since my current revision. I have a client that is using 3 groov boxes to monitor 3 sites. They are very pleased with what they are able to do with them. However, they just asked me if there was a way to show a list of who was all logged in at the same time. Sometimes when they get an alarm, multiple people log in at the same time and 1 person makes a change and another might change it back accidentally. The...... <less
Groov Find not Working Forum - Published: Has anyone been successful using Groov find? I’ve setup a number of Groov boxes and Groov Find has never worked for me. Here is my latest failed attempt after I was forced to reset my box to factory. image.png1896×877 92.6 KB ...Has anyone been successful using Groov find? I’ve setup a number of Groov boxes and Groov Find has never worked for me. Here is my latest failed attempt after I was forced to reset my box to factory. image.png1896×877 92.6 KB ... <less
Set Groov Startup Page Forum - Published: I know this is a dumb question but where do I set the startup page in Groov View?...I know this is a dumb question but where do I set the startup page in Groov View?... <less
Had to reset Groov Forum - Published: I had a client call and said it stopped receiving email alerts from groov (you could log into the app and view everything though). The last time this happened I just logged onto to Groov Admin and...moreI had a client call and said it stopped receiving email alerts from groov (you could log into the app and view everything though). The last time this happened I just logged onto to Groov Admin and rebooted the AR1 box. This time I reset the AR1 and then it never came back online. I can see there is a link to the cellular modem port, but I can’t log into the groov app or groov admin. Is there anything I can do besides driving 2 hours to manually reset this thing? Thanks, Dan... <less
Groov OPC Client Forum - Published: I have a specific application where the Groov is communicating with a version of Prosys Java OPC Server, for some unknow reason Groov is not able read AB UDTs from the server but any other OPC-UA client...moreI have a specific application where the Groov is communicating with a version of Prosys Java OPC Server, for some unknow reason Groov is not able read AB UDTs from the server but any other OPC-UA client that I tried can read it without issue. I know Kepware is the recommended OPC Server but it will be helpful for me to know what is Groov OPC client base on. Thanks for your help.... <less
Groov Epic Date / Time Forum - Published: Is there a document that has the address for the Groov Epic Date and Time. Does not appear to come up with Pac Manager. Capture.PNG820×565 16.9 KB ...Is there a document that has the address for the Groov Epic Date and Time. Does not appear to come up with Pac Manager. Capture.PNG820×565 16.9 KB ... <less
Error start Groov AT1 Forum - Published: Hi, i´m sorry my english is very bad!! I have a Groov AT1 and not running ok, please check pic. Captura de pantalla 2017-06-06 a la(s) 08.59.29.png2560×1600 963 KB I try to restart factory with no...moreHi, i´m sorry my english is very bad!! I have a Groov AT1 and not running ok, please check pic. Captura de pantalla 2017-06-06 a la(s) 08.59.29.png2560×1600 963 KB I try to restart factory with no results, Any idea how to reset it from the factory? Regards, Luis Llanos (Chile)... <less
Groov Write Queue Full Forum - Published: How many pending writes does the groov AR1 support and how fast are writes written between the onboard Node-Red server and the groov server? I’ve got an application in which I’m querying a device via...moreHow many pending writes does the groov AR1 support and how fast are writes written between the onboard Node-Red server and the groov server? I’ve got an application in which I’m querying a device via Ethernet TCP/IP (once a second), parsing the response, then writing tags to the groov server (32 tags at once). Everything was fine with one device connected. Then I added a second device (runs simultaneously in its own flow) and noticed that the number of writes in the queue (as seen in the Node...... <less
SNAP PAC and groov Nodes Forum - Published: Hello All, I need a little bit of information about SNAP PAC and groov Nodes. I’ve been using Node-RED in different ways to interact with MSSQL databases and it’s worked great so far, but I’m having...moreHello All, I need a little bit of information about SNAP PAC and groov Nodes. I’ve been using Node-RED in different ways to interact with MSSQL databases and it’s worked great so far, but I’m having issues putting information from groov and SNAP-PAC nodes into the same database. It seems like the values no matter how I format them are coming up as Nulls in the database. What format are the SNAP PAC and groov nodes outputing their data as?... <less
Groov Build - Snap to Grid? Forum - Published: Is there any way to standardize templates with in Groov build? We have many pages I am trying to correct the layout of all gadgets and text for the “Handheld” view tab of Groov build. Is there a way to...moreIs there any way to standardize templates with in Groov build? We have many pages I am trying to correct the layout of all gadgets and text for the “Handheld” view tab of Groov build. Is there a way to create a template page? Or even better is there a way to do a “format painter” similar to what is possible in Excel where it looks at a previous page build and re-orders the gadgets into the same location. (Snap to Grid?) is it possible to read the locations from the previous page and get the gadg...... <less
Hide groov title bar Forum - Published: Is there a way to hide the groov title bar only on certain pages? Also, is there some sort of "drop-down page navigation? I know about the page links, but I do not want to clutter the display with links....Is there a way to hide the groov title bar only on certain pages? Also, is there some sort of "drop-down page navigation? I know about the page links, but I do not want to clutter the display with links.... <less
Groov and ip camera Forum - Published: Use groov, when multiple users use the browser (Firefox) to access a ip camera at the same time, the image will flicker. Is this normal?...Use groov, when multiple users use the browser (Firefox) to access a ip camera at the same time, the image will flicker. Is this normal?... <less
Groov SSL and SmartTV Forum - Published: Hello, I am setting up a LG smart TV to hit our Groov box. The TV uses webOS, and has a nice browser. The problem that it will not accept the Groov’s SSL certificate. From what I have read this is a...moreHello, I am setting up a LG smart TV to hit our Groov box. The TV uses webOS, and has a nice browser. The problem that it will not accept the Groov’s SSL certificate. From what I have read this is a common problem with smart TV’s. Short of using a Chromecast or a Raspberry pi, what can I do? Thanks, Malcolm... <less
Snap-to- Grid in Groov Build Forum - Published: Is there anyway to turn off the snap-to-grid funciton in Groov build or is there some keystroke combo that is more precise than the default? I’m trying to line up a pipe with a tank and the increments...moreIs there anyway to turn off the snap-to-grid funciton in Groov build or is there some keystroke combo that is more precise than the default? I’m trying to line up a pipe with a tank and the increments seem to be set at about a sixteenth of an inch. Thanks, Dave... <less
Groov Objects Forum - Published: I just realized that the when groov objects do not allow selection of bits when selecting a tag. How does the object know what bit to select in integers and floats? Is this only an object issue or is...moreI just realized that the when groov objects do not allow selection of bits when selecting a tag. How does the object know what bit to select in integers and floats? Is this only an object issue or is the tag selection logic an issue? I did see “array” box at the bottom of the tag selection window, however it was not active.... <less
Groov Node-RED tcp input Forum - Published: Is there a firewall on a GROOV-AR1-BASE that might be preventing a remote connection to a tcp node running on its Node-RED server? I created a test flow on the groov with just a tcp input node set to...moreIs there a firewall on a GROOV-AR1-BASE that might be preventing a remote connection to a tcp node running on its Node-RED server? I created a test flow on the groov with just a tcp input node set to “Listen” on port 8000 (server). On my laptop I’ve tried connected to it on that port (using a couple of terminal programs) but it fails. I’ve also tried other ports like 4000 and 11000. Alternatively, I have tried setting the tcp input node to “Connect” to my laptop (client) and that succeeds. I’v...... <less
Groov 3.4a upgrade Forum - Published: I really want to thank Opto22 and the groov development team for implementing a couple of fixes and features that solve major issues I’ve had with the product. Adding the update to the command button...moreI really want to thank Opto22 and the groov development team for implementing a couple of fixes and features that solve major issues I’ve had with the product. Adding the update to the command button eliminate the need to have multiple almost identical pages. Thanks again But I’ve got more ideas ... <less
Scaling in Groov Forum - Published: From our pump flow meters we collect total gallons over time and that number gets pretty big. Currently it’s at 3,713,041 gallons. I want to convert that to acre/ft. It’s an easy conversion that I...moreFrom our pump flow meters we collect total gallons over time and that number gets pretty big. Currently it’s at 3,713,041 gallons. I want to convert that to acre/ft. It’s an easy conversion that I know how to do. My problem is making it work in the Opto/Node-RED environment. Here’s the formula: 1 gallon = 0.0000030688832459704 acre/ft Here’s my issue: Groov will display the raw number if I make the tag a float. However I don’t know how to use the scaling function in Groov to do make the co...... <less
Groov and SoftPAC Forum - Published: Can a GROOV-AR1 read a strategy that is loaded to SoftPAC that is on your local network? Also, can you secure a strategy (.ssd file) and load it to SoftPAC?...Can a GROOV-AR1 read a strategy that is loaded to SoftPAC that is on your local network? Also, can you secure a strategy (.ssd file) and load it to SoftPAC?... <less
Groov EPIC and Modbus TCP Forum - Published: I was just testing out the upcoming release for Groov EPIC and the Modbus TCP functionality that will be built into the controller and wanted to share some information. Modbus TCP in Groov EPIC will...moreI was just testing out the upcoming release for Groov EPIC and the Modbus TCP functionality that will be built into the controller and wanted to share some information. Modbus TCP in Groov EPIC will work just as it did in SNAP PAC for talking to your Memory Map locations. It does not use base-one addressing and you can still find the Unit ID and Register Address for any scratch pad location with the Modbus Calculator in PAC Manager. The PAC Manager User’s Guide for Configuring Modbus Options may...... <less
Groov test with pac R1 Forum - Published: Hello everyone, I am trying groov, it is very convenient to build a HMI. However, is there a way to know who is connected to the groov, who operated on the device, to form a record of operation? The...moreHello everyone, I am trying groov, it is very convenient to build a HMI. However, is there a way to know who is connected to the groov, who operated on the device, to form a record of operation? The customer wants all the operations to be documented and traceable. Who. What time to start the pump, stop the pump, etc… Thank you 788119763598483543.jpg640×960 64.3 KB 111.png1280×1400 119 KB ... <less
Groov AR1 Project Forum - Published: I have an AR1 and I can’t log into it any more. It has been powered off for about a year. I can get into the admin part of it. That seems to work, but I’m interested in the project that was last loaded...moreI have an AR1 and I can’t log into it any more. It has been powered off for about a year. I can get into the admin part of it. That seems to work, but I’m interested in the project that was last loaded to it. I use the username and password for the groov view and build, but it says “Incorrect username or password”. Can the AR1 lose the project that is loaded into to it if it were powered off for a year or so? Can I somehow get to the project from the Admin login? Thanks, Dan... <less
Groov Box Data Limit Forum - Published: Hello, I am new to the forum and just recently i convinced our company to order a Groov Box for trending data and storing that data in a database using the REST API. I have been looking through the...moreHello, I am new to the forum and just recently i convinced our company to order a Groov Box for trending data and storing that data in a database using the REST API. I have been looking through the other forum questions and i have not quite found the answer. My question is what would be the limit if I took a OPCUA tag and 1) trended it for at least 30 days 2) used it in about 3 locations on the GUI 3) Sent that data to a REST API(which i will be learning more about soon). Approximately how many ...... <less
New groov IO Nodes Forum - Published: Node-RED fans… We have released three new Node-RED nodes, all in the Node-RED-contrib-groov-IO package. Now you can talk directly to your IO points or any MMP address There are three types of nodes...moreNode-RED fans… We have released three new Node-RED nodes, all in the Node-RED-contrib-groov-IO package. Now you can talk directly to your IO points or any MMP address There are three types of nodes available: Input: scans for changes to an I/O channel value or property. Read: reads the current value or a related property of an I/O channel or MMP address. Write: writes a value to an I/O channel or MMP address. Check them out yourself; flows.nodered.org node-red-con...... <less
Groov trend options? Forum - Published: Is there a way to set the resolution of the trend data? I don’t really need 14 decimal place resolution. Also, is there a way to set the default zoom level whenever the page is opened? If not, there should be. groov_trends.png1391×489 21.5 KB ...Is there a way to set the resolution of the trend data? I don’t really need 14 decimal place resolution. Also, is there a way to set the default zoom level whenever the page is opened? If not, there should be. groov_trends.png1391×489 21.5 KB ... <less
Groov date time gadget Forum - Published: Any chance we can get a date/time picker for groov? I would expect it to read and write from a PAC Control table in the Opto date/time table format. There should also be options for just the date, just...moreAny chance we can get a date/time picker for groov? I would expect it to read and write from a PAC Control table in the Opto date/time table format. There should also be options for just the date, just the time, and both with various international formats. Something like this that is from jquery-ui: ... <less
List of things for Groov Forum - Published: Ok, here is a minimum level of required features for Groov that are needed last year… Select all. Crossing window to left, select all. Window to right, select. Delete without confirm, this one is...moreOk, here is a minimum level of required features for Groov that are needed last year… Select all. Crossing window to left, select all. Window to right, select. Delete without confirm, this one is killing me smalls. Zoom window to size required for display in build. Build size that is actually WYSG. Command/Button or objects in general that will scale down to size for adult use. Command button with dynamic text. Command button with pilot (not that little bitty led kinda thing…). Rectangular pilo...... <less
Tag Scaling in Groov Forum - Published: I have certain devices which use 4-20 mA for their output. These are connected to pumps which don’t run all the time. When the pump is off there is still a certain amount of current fluctuation which...moreI have certain devices which use 4-20 mA for their output. These are connected to pumps which don’t run all the time. When the pump is off there is still a certain amount of current fluctuation which manifests itself as small numbers in the display. Is there a way to “zero out” these tags if there’s nothing going on? I suppose I could do it in a strategy but I would have to rework everything as these are being pulled direct from a modbus device by Groov. ... <less
Groov Refresh Rate Forum - Published: I have a refresh rate problem in my Groov. I have two buttons that write a one or a zero to a PAC table and Modbus register on a different device, respectively. Both devices are on the same network...moreI have a refresh rate problem in my Groov. I have two buttons that write a one or a zero to a PAC table and Modbus register on a different device, respectively. Both devices are on the same network and same subnet. When I click the button associated with the PAC, it updates the table immediately but the button doesn’t reflect the change in status, or if it does it takes as long as two minutes. Identical button pointing to my Modbus device writes the register immediately and updates the butto...... <less
Groov RIO in the flesh Forum - Published: I have a working unit on my desk, so feel free to ask any questions and I will do my best to answer them. image.jpg700×1081 225 KB You can read about it in our blog post here; https://blog.opto22.com...moreI have a working unit on my desk, so feel free to ask any questions and I will do my best to answer them. image.jpg700×1081 225 KB You can read about it in our blog post here; https://blog.opto22.com/optoblog/announcing-another-opto-22-breakthrough-groov-rio-remote-i/o-for-the-iiot There is a single page describing it on our website as well; https://info.opto22.com/introducingRIO Download the press release from here; https://www.opto22.com/support/resources-tools/documents/2335-press-release...... <less
Node-red and Groov View Text Area Forum - Published: Greetings, Is that possible using node-red Groov Write Node to write data from text file into Text Area Gadget in Groov View? So that the Text Area Gadget could display data on Groov View. Or there is another way to show text file on Groov View? Eg: ...Greetings, Is that possible using node-red Groov Write Node to write data from text file into Text Area Gadget in Groov View? So that the Text Area Gadget could display data on Groov View. Or there is another way to show text file on Groov View? Eg: ... <less
Groov-srv-win demo Forum - Published: any ETA for the demo version of groov for windows? or will it be included in Ver2? thanks, nick...any ETA for the demo version of groov for windows? or will it be included in Ver2? thanks, nick... <less
Historian Plot In Groov Forum - Published: Hi Will GROOV 2.0 support Historical Graphing? Regards, Milind Raval...Hi Will GROOV 2.0 support Historical Graphing? Regards, Milind Raval... <less
API Key for a Groov Write Node Forum - Published: I’m trying to write to a Groov datastore using a Groov Node-RED write node. When I do I get a connect error saying bad API key. In the docs it just says you need the API key for the project. The...moreI’m trying to write to a Groov datastore using a Groov Node-RED write node. When I do I get a connect error saying bad API key. In the docs it just says you need the API key for the project. The only API key I know how to get out of Groov is from the user accounts page and they’re all different depending on the account… Where can I find the API key? Thanks, image.png810×414 21.2 KB ... <less
Known issues in groov View R3.5 Forum - Published: Hey all, just wanted to let folks know about issues that’ve been reported and confirmed in groov View R3.5. The groov Data Store Node-RED nodes aren’t working. There was an accidental change to some...moreHey all, just wanted to let folks know about issues that’ve been reported and confirmed in groov View R3.5. The groov Data Store Node-RED nodes aren’t working. There was an accidental change to some JSON that groov View spits out and it confuses the nodes. We’re working on getting an emergency R3.5b release covering this out in the next day or so. KB87269 The event scanner can crash if you run groov View with no events configured. This is mostly an issue for brand new projects, but it’s easy...... <less
Groov acting as a proxy server Forum - Published: I am trying to use a Groov appliance video gadget, with Groov acting as a proxy server. When the “Use Groov as proxy” is not selected, the video feed comes through fine; the moment I select “use as...moreI am trying to use a Groov appliance video gadget, with Groov acting as a proxy server. When the “Use Groov as proxy” is not selected, the video feed comes through fine; the moment I select “use as proxy”, it stops working and only the empty gadget frame appears. Here are some details about my question and network configuration: On the Groov box I am using both the Eth0 and Eth1 ports. The Eth0 port is configured using a subnet that has access to the internet (Lan-1), so is less secure. The ...... <less
Groov and Displaypro Forum - Published: Why is the image of the IP camera shown in the groov stable, but will the IP camera image flicker in DisplayPro? How to solve?...Why is the image of the IP camera shown in the groov stable, but will the IP camera image flicker in DisplayPro? How to solve?... <less
Can't Display Video URL in Groov Forum - Published: I have a Groov which is displaying a video URL. The URL is actually a .jpg that updates every minute from a wireless camera. The weird thing is it works on some computers but not on others. Same URL...moreI have a Groov which is displaying a video URL. The URL is actually a .jpg that updates every minute from a wireless camera. The weird thing is it works on some computers but not on others. Same URL. The Groov and the camera are on the same subnet but the connection to the Groov is from the Internet through a router which is port forwarding. Is there a port I need to open to display this URL to my remote computers? I have all the standard Groov ports open (443, 10000). Tried opening up po...... <less
Groov lose the internet Forum - Published: Hi , let me groov connected to monitor process but fails connect, the next day i realized that was static wlan led because this happens?...Hi , let me groov connected to monitor process but fails connect, the next day i realized that was static wlan led because this happens?... <less
Open ftp:\\10.10.0.22\sdcard0 in groov Forum - Published: Is it possible to have a link in groov that will open a windows explorer page that will look at saved csv files on the Pac R1 Controller. I am logging to CSV files now in Pac Control and opening them...moreIs it possible to have a link in groov that will open a windows explorer page that will look at saved csv files on the Pac R1 Controller. I am logging to CSV files now in Pac Control and opening them in Pac Display but I am migrating to Groov, from the groov screen I want to execute an external program or open windows explorer. Thanks... <less
Groov Server 4.2a for Windows Forum - Published: Am trying to download the trial version of Groov Server 4.2a for Windows, but when I go the ‘groov.com’ and go thru the process, it downloads 4.1. Any info on when this will be available Thanks Dave...Am trying to download the trial version of Groov Server 4.2a for Windows, but when I go the ‘groov.com’ and go thru the process, it downloads 4.1. Any info on when this will be available Thanks Dave... <less
Groov Server for Windows Forum - Published: Thought it would be a good way to start the thread with the announcement of a new way to build and view groov pages… BYOB. Bring your own box. Got a Windows PC? Wana run groov? Now you can. http://www...moreThought it would be a good way to start the thread with the announcement of a new way to build and view groov pages… BYOB. Bring your own box. Got a Windows PC? Wana run groov? Now you can. http://www.opto22.com/site/pr_details.aspx?cid=1&item=GROOV-SVR-WIN Software only groov! [B]To install and run [I]groov[/I] Server[/B] you’ll need: A PC on the same network as your SNAP PAC controller, with one of the following Microsoft® operating systems: Windows® 7 Professional (32-bit and 64-bit) Window...... <less
Pull Down Menus in Groov Build Forum - Published: I want to be able to select something in a pull-down menu in Groov. I don’t see that in any of the gadget or tag menus. I’m new to Groov development so forgive me if this topic has been covered. Thanks, Dave...I want to be able to select something in a pull-down menu in Groov. I don’t see that in any of the gadget or tag menus. I’m new to Groov development so forgive me if this topic has been covered. Thanks, Dave... <less
Public web pages in Groov Forum - Published: Is there any way to create a public web page in Groov so that users don’t need a login to see information?...Is there any way to create a public web page in Groov so that users don’t need a login to see information?... <less
Groov Logged In User in Node-RED Forum - Published: I’ve got a groov AR1 with Node-RED flows collecting data from a variety of devices. I’d like to setup a process by which a user would log into a page on the groov to enter specific data which would...moreI’ve got a groov AR1 with Node-RED flows collecting data from a variety of devices. I’d like to setup a process by which a user would log into a page on the groov to enter specific data which would then be logged to a database via Node-RED. My question is can Node-RED also collect the name or ID of the user that logged into the page? It would be useful to include that along with the entered data. Thanks.... <less
Groov EPIC SetPIDMode Forum - Published: Hi, I am facing difficulties with “setpidmode” under Groov EPIC controller. I am using “setpidmode(xxx, 0) when i was trying to change that particular PID to auto mode. It was working fine on snap pac...moreHi, I am facing difficulties with “setpidmode” under Groov EPIC controller. I am using “setpidmode(xxx, 0) when i was trying to change that particular PID to auto mode. It was working fine on snap pac system but not on the groov epic. Can someone please assist on this? Thanks... <less
Groov Epic simulator Forum - Published: Is there a way to simulate with Groov Epic? Right now when I run the simulator I get the error, “BOARD.GRV definition unknown.” I’m going to try adding in a snap-pac IO unit and move all my IO to it...moreIs there a way to simulate with Groov Epic? Right now when I run the simulator I get the error, “BOARD.GRV definition unknown.” I’m going to try adding in a snap-pac IO unit and move all my IO to it and then remove the epic for code testing purposes. This will most likely work but I wonder if there is a Groov Epic simulator available.... <less
Groov Data Store data types Forum - Published: I’ve been using both groov and node-red to make various dashboards at work. I keep finding the structure of the groov date store to be restrictive. Is there any good reason the data store couldn’t have...moreI’ve been using both groov and node-red to make various dashboards at work. I keep finding the structure of the groov date store to be restrictive. Is there any good reason the data store couldn’t have JSON as a data type option… this would make it so much easier to use in conjunction with node-red and it would make groov that much more flexible and web friendly to be able to use data within JSON with the various gadgets.... <less
Save Camera Image in Groov Forum - Published: I’ve got my first groov project coming up (yeah!) and I was wondering if it’s possible to upload an image from an IP camera either to a file (e.g. FTP) or a SQL database? Could this also be accomplished via Node-RED? Thanks....I’ve got my first groov project coming up (yeah!) and I was wondering if it’s possible to upload an image from an IP camera either to a file (e.g. FTP) or a SQL database? Could this also be accomplished via Node-RED? Thanks.... <less
Groov time on trends fixed? Forum - Published: What future features would you like to see in groov View? philip: Also, if you change the timezone on a PR1, it has to be restarted before groov view will recognize it. I think I have a fix for...more What future features would you like to see in groov View? philip: Also, if you change the timezone on a PR1, it has to be restarted before groov view will recognize it. I think I have a fix for that in the next release. There’ll still be a delay, but it should correct itself within a minute or so. Do you know if this ever got resolved? I looked through the firmware readme and didn’t see anything. I have an AR1 on R4.0c where the time on the trends were off by an hour after DST ended un...... <less
Where are Groov Images Stored? Forum - Published: I have a project created by someone else that I would like to take an image from. It’s on my Groov box and I have full rights to the project. I tried to copy and paste the image in Groov Build but...moreI have a project created by someone else that I would like to take an image from. It’s on my Groov box and I have full rights to the project. I tried to copy and paste the image in Groov Build but that didn’t work. The image library doesn’t seem to give you a way to export images. I even looked at the backup file I have of the project but didn’t see anything in there either. I just want to put the image in a graphics program and rotate it 90 degrees. Thanks, Dave... <less
Rotating Groov Pages (Tabs) Forum - Published: Greetings, I took the plunge and installed a Groov a couple of months ago. It is very useful and quite cool. I am installing an LG smart TV in our control room for displaying Groov to our plant...moreGreetings, I took the plunge and installed a Groov a couple of months ago. It is very useful and quite cool. I am installing an LG smart TV in our control room for displaying Groov to our plant operators. I want to display each page for 15 seconds, and then move to the next page for 15 seconds. How do I do this? I thought that there was an earlier post on this subject but I cannot find it. Is there a way to not rotate screens on other devices or limit it to that TV only? I have a telephone and s...... <less
Groov Bandwidth Usage Forum - Published: Hello all, Is there anyway I can monitor Groov’s Bandwidth usage without having access to the router on the network? Like is there anything that groov does to monitor it’s own bandwidth? Or can I manage it with a PAC? Any suggestions would be great....Hello all, Is there anyway I can monitor Groov’s Bandwidth usage without having access to the router on the network? Like is there anything that groov does to monitor it’s own bandwidth? Or can I manage it with a PAC? Any suggestions would be great.... <less
Groov as an autodialer? Forum - Published: Has anyone devised a way to use a groov box as an autodialer substitute? We have an upcoming project to update an I/O panel; one of the jobs the panel handles is sending alarms to an old-school...moreHas anyone devised a way to use a groov box as an autodialer substitute? We have an upcoming project to update an I/O panel; one of the jobs the panel handles is sending alarms to an old-school autodialer. Digital output modules trigger the multiple inputs on the autodialer. The good thing about the autodialer is it’s ability to dial any telephone number. Land line or mobile. I am not sure of any way the groov could handle this function. Thanks... <less
Groov Modbus Driver list Forum - Published: Hey guys, is there a list of modbus drivers for the groov? And do these drivers work on their own or does it require Igntion Edge?...Hey guys, is there a list of modbus drivers for the groov? And do these drivers work on their own or does it require Igntion Edge?... <less
Kinect and groov sample Forum - Published: Hello. This is a sample program for groov demonstration with using Kinect sensor. This program works on Kinect SDK 1.8. Visual Basic 2010 Express. OS Windows7,Windows8,Windows Server 2012. This...moreHello. This is a sample program for groov demonstration with using Kinect sensor. This program works on Kinect SDK 1.8. Visual Basic 2010 Express. OS Windows7,Windows8,Windows Server 2012. This software sends Kinect sensor value to scratchpad memory of PAC. And save the Skeleton people image. 1)app.config: Setting of PAC IP address and Kinect image file path. 2)Kinect sensor value is written to SPM of PAC. Status of SPM pacmanager.PNG817×574 24.8 KB Demo of groov demo.PNG769×563 73.7 KB (S...... <less
New Trending for Groov Forum - Published: Can anyone give me an estimate on the amount of space the new interactive trend takes on groov? Like sizewise. I assume the information is going to be kept on the groov box so I would like to know how...moreCan anyone give me an estimate on the amount of space the new interactive trend takes on groov? Like sizewise. I assume the information is going to be kept on the groov box so I would like to know how much space this takes and how to purge the graph eventually if possible.... <less
Does the EPIC groov use OptoMMP? Forum - Published: Apparently, in order to get analog scaling values, you have to read them from the hardware memory map According to this discussion from a couple of years ago, the scale range values are in the...moreApparently, in order to get analog scaling values, you have to read them from the hardware memory map According to this discussion from a couple of years ago, the scale range values are in the hardware memory map which is documented in the OptoMMP Protocol Guide (doc #1465). The latest version of this guide predates the EPIC groov. Does the EPIC groov support the same HW Map as specified by OptoMMP?... <less
Groov Tag Scale or Scale Factor Forum - Published: I updated my Groov server today to the current version. If I configure a tag with a scale or use the Scale Factor on a round gauge, it doesn’t seem to work. I know the Scale Factor worked with a round...moreI updated my Groov server today to the current version. If I configure a tag with a scale or use the Scale Factor on a round gauge, it doesn’t seem to work. I know the Scale Factor worked with a round gauge on my previous version. Maybe I’m doing something wrong?... <less
Groov EPIC modules for CT Forum - Published: Hi I have a CT (OPTOEMU-ACT-0750-100), which I would like to monitor or get the power and energy measurements. My question is I am planning to use groov EPIC for this but I don’t know what modules...moreHi I have a CT (OPTOEMU-ACT-0750-100), which I would like to monitor or get the power and energy measurements. My question is I am planning to use groov EPIC for this but I don’t know what modules should I use to get the readings via the existing CT. Pls. help.... <less
Groov Email not Working Forum - Published: I’m trying to get Groov to send an email alert using a Gmail account. I’ve tried it on three different Groov boxes at three separate locations. One worked fine. The second I had to tweak the Gmail...moreI’m trying to get Groov to send an email alert using a Gmail account. I’ve tried it on three different Groov boxes at three separate locations. One worked fine. The second I had to tweak the Gmail security settings to get it to work. The third doesn’t work at all no matter what I try. Keep in mind that all the settings are identical on all three boxes and they’re all using the same Gmail account. There are no outbound firewall restrictions. The Internet connection is provided by identical ...... <less
CAN support on Groov EPIC Forum - Published: Hello, I’m new to the forum, but have not been able to find any related forum, I have some VFDs that communicate over Modbus RTU, or CANOpen Protocols, and Although the Modbus RTU side is covered by...moreHello, I’m new to the forum, but have not been able to find any related forum, I have some VFDs that communicate over Modbus RTU, or CANOpen Protocols, and Although the Modbus RTU side is covered by the Groov Epic using a USB to Serial adaptor, or the Serial Module, I was wondering if there is any solution at the moment for communicating using the CANOpen Protocol, perhaps a compatible USB to CAN converter that has been tested.... <less
Batching Groov Alerts Forum - Published: Is there a way to batch Groov alerts or put them on some kind of timer? We set up a number of alerts, well over a hundred, and we’re getting hammered by emails and texts. We have our own thresholds...moreIs there a way to batch Groov alerts or put them on some kind of timer? We set up a number of alerts, well over a hundred, and we’re getting hammered by emails and texts. We have our own thresholds, which is what triggers them and it would be nice to say “only send this alert every hour” or something to that effect. My alternative is to go to Node-RED which works really well but it’s a lot of work. Thanks, Dave... <less
Groov Epic Modbus Slave Forum - Published: I would like to setup the Groov Epic as a Modbus Slave in order for a 3rd party HMI to access and control the unit. What is the easiest way to accomplish this? I recently download the Modbus...moreI would like to setup the Groov Epic as a Modbus Slave in order for a 3rd party HMI to access and control the unit. What is the easiest way to accomplish this? I recently download the Modbus Integration Kit from Opto 22 not sure if this would be the best way to proceed or not. Any examples that can be provided would be very helpful.... <less
Kepserver for Groov Forum - Published: Hi All Does anyone know if the Kepserver Enterprise package bundled with the Rockwell Factory Talk suite will be compatible with groov? Thanks in advance!...Hi All Does anyone know if the Kepserver Enterprise package bundled with the Rockwell Factory Talk suite will be compatible with groov? Thanks in advance!... <less
Groov EPIC data to Nodered Forum - Published: Do we require to purchase SSL or CA Certificate for testing Groov EPIC data into Node Red through PAC Read or PAC Write node? Is there any way for testing without purchasing that certificate? so we can...moreDo we require to purchase SSL or CA Certificate for testing Groov EPIC data into Node Red through PAC Read or PAC Write node? Is there any way for testing without purchasing that certificate? so we can test that thing. Can anybody provide the steps? I have attached screenshots of my configurations and errors for reference. Thanks & Regards, Configuration-1.JPG1833×924 104 KB Configuration-2.JPG1830×927 97.6 KB Error-2.JPG1828×927 141 KB Error-1.JPG1829×925 138 KB Aanand... <less
Groov to Compact Logix Forum - Published: Good Morning All, What would be your reccomendations for getting data from a Allen Bradley Compact Logix plc into groov. I have an idea of how I’m going to do it, but I just wanted to hear some open...moreGood Morning All, What would be your reccomendations for getting data from a Allen Bradley Compact Logix plc into groov. I have an idea of how I’m going to do it, but I just wanted to hear some open ended suggestions. See if anyone might have any unique ideas.... <less
Drawing Tools in Groov Forum - Published: From what I can tell there are no drawing tools in Groov. So if I want to draw a box around a group of gadgets, how would I do that? I don’t want to use a Group Header gadget because I don’t want the...moreFrom what I can tell there are no drawing tools in Groov. So if I want to draw a box around a group of gadgets, how would I do that? I don’t want to use a Group Header gadget because I don’t want the header and a Line Header gadget just gives me a line and a label. Also it would be nice to be able to group gadgets so they could more easily moved around. Finally, while I’m at it, how about an Undo feature. Accidentally deleting 50 gadgets is no fun. Any plans for these?... <less
Groov View: Get rid of space top border Forum - Published: From groov Demo: ... From groov Demo: ... <less
Page Links between two Groov boxes Forum - Published: I am currently using two groov boxes to monitor two separate labs. Within each Groov box I have created page links that open pages within the other groov box. When clicking on these links, a new tab is...moreI am currently using two groov boxes to monitor two separate labs. Within each Groov box I have created page links that open pages within the other groov box. When clicking on these links, a new tab is opened. If I switch multiple times between groov boxes, I have many tabs open on my webpage. How do I stop the new tabs from opening each time I switch between Groov boxes?... <less
Can a page in a Groov project be exported? Forum - Published: excuse me Can a page in a Groov project be exported? Then import this page into another new Groov project. Thank you...excuse me Can a page in a Groov project be exported? Then import this page into another new Groov project. Thank you... <less
How do you delete the old project in Groov Forum - Published: How do you delete the old project in Groov and then build a new project?...How do you delete the old project in Groov and then build a new project?... <less
Groov View R4.1c has been released! Forum - Published: You can download it via manage.groov.com. Issues fixed in this release: KB88221 - Stack Full error and groov View flashes yellow triangle on gadgets KB88193 - groov View gadgets may not update when time set back ...You can download it via manage.groov.com. Issues fixed in this release: KB88221 - Stack Full error and groov View flashes yellow triangle on gadgets KB88193 - groov View gadgets may not update when time set back ... <less
Write to a groov Data Store table with Node-RED Forum - Published: In case you missed it, @torchard has written up a nice solution for writing to a groov DataStore table (string, floats or ints) from a single Node-RED groov Write Node. This is a massive advantage if...moreIn case you missed it, @torchard has written up a nice solution for writing to a groov DataStore table (string, floats or ints) from a single Node-RED groov Write Node. This is a massive advantage if you are reading records from a database and displaying it on groov pages. (ie, select * from db). Writing a groov table with a single node Node-RED The simplest way to get an array from Node-RED to a groov data store table is to make a single write node for each of the ta...... <less
Groov writing to a database Forum - Published: How would you go about having Groov write back to a database such as MS Access?...How would you go about having Groov write back to a database such as MS Access?... <less
Groov Video Gadget - Can I link to a video on PC Forum - Published: With the Groov Video Gadget, is it possible to have it link to a video stored on the pc that runs Groov (Ie C:\Videos). These videos will be ‘help/instruction’ for the user, not external live feed cameras. Thanks...With the Groov Video Gadget, is it possible to have it link to a video stored on the pc that runs Groov (Ie C:\Videos). These videos will be ‘help/instruction’ for the user, not external live feed cameras. Thanks... <less
Feature Request: iframe in groov Forum - Published: I would like to be able to display another webpage in groov like can be done in PAC Display Pro....I would like to be able to display another webpage in groov like can be done in PAC Display Pro.... <less
Data to Groov From Business Network Forum - Published: Hello, We have a groov that is set up as using the ETH0 port to our business network via a direct fiber connection. ETH1 is on a plant network via a direct copper connection. We have S1 PAC’s on the...moreHello, We have a groov that is set up as using the ETH0 port to our business network via a direct fiber connection. ETH1 is on a plant network via a direct copper connection. We have S1 PAC’s on the plant network, and we have an R1 PAC on the business network. We are using the groov to display data from the plant network to the business network. We want to display data from the R1 that is on the business network using the groov. How can we get the R1 to send data to the groov from the ETH0 busin...... <less
How Can groov Get Excel or SQL Server Data? Forum - Published: Is there a way for a groov box to obtain and use data from an Excel spreadsheet or a SQL Server (or MS Access) table?...Is there a way for a groov box to obtain and use data from an Excel spreadsheet or a SQL Server (or MS Access) table?... <less
Does Groov support sound alarm? Forum - Published: Hello everyone, I’m sorry, a lot of problems. Groov can support up to several IP cameras? A few camera controls appropriate for a page? Does Groov support sound alarm? Like Display’s sound alarm...moreHello everyone, I’m sorry, a lot of problems. Groov can support up to several IP cameras? A few camera controls appropriate for a page? Does Groov support sound alarm? Like Display’s sound alarm function, what is the way to achieve sound alarm? My first groov application with a IP camera will begin, Wish me luck!... <less
Groov iPhone and Android app users Forum - Published: Hey all you groov fans using the mobile phone apps… have any of you had requests for a different logo (besides the groov infinity) e.g. for your own branding? I find a few options on the internet (at...moreHey all you groov fans using the mobile phone apps… have any of you had requests for a different logo (besides the groov infinity) e.g. for your own branding? I find a few options on the internet (at least for Android, no so much for Apple) and wondered if anyone had experience or suggestions along those lines…... <less
Getting Scaled Groov Data into Node-RED Forum - Published: I have a Modbus device which I pull data from and then scale it in Groov. Works great. Now I want to manipulate that data in Node-RED. I thought I should be able to access that data from a Groov...moreI have a Modbus device which I pull data from and then scale it in Groov. Works great. Now I want to manipulate that data in Node-RED. I thought I should be able to access that data from a Groov Read node but that node only lets me read from a Groov datastore. How can I read my nicely scaled values into Node-RED? If I just read the raw Modbus values then I have to scale them in Node-RED. Since these are 4-20mA values I have to use some formula that I’ve never understood. The nice thing abo...... <less
Groov EPIC and Microsoft Power BI Forum - Published: In the past, I have introduced groov EPIC features to our top managers. When explaining about groov View dashboard, this term always comes up from my audience; Power BI. And I go like, “I do not know...moreIn the past, I have introduced groov EPIC features to our top managers. When explaining about groov View dashboard, this term always comes up from my audience; Power BI. And I go like, “I do not know what Power BI is, but I am sure groov View can also do that.” After believing this for a long time, I finally came to conclusion that, we cannot beat Power BI, it is totally a different beast. As the saying goes, If you can’t beat them, join them. It is my day-1 learning about Power BI, but I am thi...... <less
Why is the Time in my Groov Trend not Correct? Forum - Published: I’ve checked the groov and it’s correct for my time zone Pacific Standard Time but the trend looks like it’s showing GMT image.png854×376 6.57 KB ...I’ve checked the groov and it’s correct for my time zone Pacific Standard Time but the trend looks like it’s showing GMT image.png854×376 6.57 KB ... <less
Control Node-RED Flows with groov View Forum - Published: One way to have Node-RED react to some groov View action like a button press is to read the data from a groov data store tag, and then make a decision based on the value that is returned, for example...moreOne way to have Node-RED react to some groov View action like a button press is to read the data from a groov data store tag, and then make a decision based on the value that is returned, for example fetching some information or activating some function. Here is a simple example that generates a random number when you press an action button in groov View: image.png854×99 10.4 KB These are the steps the flow goes through to process and react to the button press: Node-RED reads the “action” bu...... <less
Connect groov view to samsung TV Forum - Published: GREETINGS, Is a new topic here. We planning to use 2 Samsung SmartTV connect to the router and open groov view via web browser that pre-installed in the TV. Everything work fine until login to the...moreGREETINGS, Is a new topic here. We planning to use 2 Samsung SmartTV connect to the router and open groov view via web browser that pre-installed in the TV. Everything work fine until login to the groov manage, it will keep loading like below image. Why is this happen? 15784782740184610833778542736611.jpg2138×2851 1.83 MB ... <less
Groov and KEPServerEX Forum - Published: I’m brand new to Groov and control programming. My background is in IT. I’m trying to connect to a KEPServerEX I installed on the same PC as I’m using for Groov Build. All I’m really looking for...moreI’m brand new to Groov and control programming. My background is in IT. I’m trying to connect to a KEPServerEX I installed on the same PC as I’m using for Groov Build. All I’m really looking for are tags so I can build my first app. Is this my best choice or is there a better place to get tags. Connecting to the KEP server seems pretty complicated. If someone could point me in the right direction I’d greatly appreciate it. D... <less
Modbus settings in Groov View Forum - Published: Hi, I have a Yokogawa controller (YS-1700) connected to Groov-AR1 using modbus TCP/IP. Some of the tags are using DWord. I don’t understand how do I configure that in Groov view? The values are showing...moreHi, I have a Yokogawa controller (YS-1700) connected to Groov-AR1 using modbus TCP/IP. Some of the tags are using DWord. I don’t understand how do I configure that in Groov view? The values are showing in groov View but I couldn’t send write to the tags, it’ll turn error everytime i try to key in new value. I suppose it is read-only for now although I’ve chosen the Read/Write access. I’ve also select Double as data type, enable function code 6, 22 and 5 is still same… Can help me on this? I’ve a...... <less
Setting NTP for Groov not working Forum - Published: I’ve tried a couple times to set NTP for Groov but it doesn’t seem to stick. I watched the “how to set the time” tutorial, adjusted the time to close to current time, hit set NTP, but it still seems to be off. Any one else having this issue?...I’ve tried a couple times to set NTP for Groov but it doesn’t seem to stick. I watched the “how to set the time” tutorial, adjusted the time to close to current time, hit set NTP, but it still seems to be off. Any one else having this issue?... <less
Subwindows of Groov view Forum - Published: Can Groovview achieve the effect of subwindows?...Can Groovview achieve the effect of subwindows?... <less
Groov to PAC S2 Timing question Forum - Published: I am using a momentary button in groov to turn on some lights. The button has to be held down for a couple seconds for the S2 controller to pick it up. From a PC, holding the button down that long is...moreI am using a momentary button in groov to turn on some lights. The button has to be held down for a couple seconds for the S2 controller to pick it up. From a PC, holding the button down that long is not a problem. From a mobile device though (iPhone), holding the button down that long activates other features on the phone (copy, paste, etc…). Is there a way to capture the groov push button action, with just a “normal length” push?... <less
Groov Demo Login Information Forum - Published: Ok, so I have been creating a Groov project for about a month now. It is only in demo or trial mode. Usually when I come home from work, I’ll bring it up and stop/start the server and I can continue...moreOk, so I have been creating a Groov project for about a month now. It is only in demo or trial mode. Usually when I come home from work, I’ll bring it up and stop/start the server and I can continue building and testing my application. However, today I came home and it is asking for my user name and passsword. I can’t seem to find or remember that information. Is there a way to get beyond this or at least recover the trial project I have been making? Uninstall and reinstall groov server??... <less
Launching groov from an email? Forum - Published: Is there a “simple” method of launching the groov app (prefer IOS) from an email? I know I can include the URL that uses the app format, but would prefer to have the link start the app. Any ideas?...Is there a “simple” method of launching the groov app (prefer IOS) from an email? I know I can include the URL that uses the app format, but would prefer to have the link start the app. Any ideas?... <less
Moving App From Groov to PAC Control Forum - Published: I want to be able to create a tag from a third-party PLC (ABB PM564-Eth) in PAC Control. I can do it in Groov easily by setting up a Modbus device and adding a tag with an address that’s been setup on...moreI want to be able to create a tag from a third-party PLC (ABB PM564-Eth) in PAC Control. I can do it in Groov easily by setting up a Modbus device and adding a tag with an address that’s been setup on my ABB environment (Application Builder/CoDeSys). Easy and works like a champ. How do I do that in PAC Control? I have the Modbus Integration Kit and I can write other Modbus devices by using the Function 06 routine but it doesn’t work for my PLC. But the Groov works fine so I think I must be d...... <less
Browser Crash After long use with Groov Forum - Published: We have tried multiple browsers (IE, Firefox, Chrome) and typically after 24 hours of displaying groov pages, the browser freezes up and we have to restart the browser every day....We have tried multiple browsers (IE, Firefox, Chrome) and typically after 24 hours of displaying groov pages, the browser freezes up and we have to restart the browser every day.... <less