Resources & Tools

1 - 25 of 26 results for "integration kit"
Allen-Bradley DF1 Integration Kit for ioControl
Downloads - Published:
The Allen-Bradley DF1 Integration Kit provides users of Opto 22’s ioControl software (version 6.0 and above) an easy method of communicating with Allen-Bradley drivers or PLCs using the DF1...more
Allen-Bradley DF1 Integration Kit for OptoControl
Downloads - Published:
OPTOINTAB is an integration kit for communicating between OptoControl and third-party DF1 protocol devices. The integration kit includes subroutines, example strategies, and documentation. In addition...more
Modbus Integration Kit for OptoControl (Serial)
Downloads - Published:
The OPTOINTMB is an integration kit for communicating between OptoControl and third-party serial Modbus devices. The integration kit includes subroutines, example strategies, and documentation. In...more
Modbus/Serial Integration Kit for ioControl
Downloads - Published:
This Modbus/Serial Integration Kit for ioProject allows Opto 22 controllers, using ioControl, to connect via a serial network to any Modbus device and communicate using the Modbus protocol. The...more
Modbus/TCP Integration Kit for ioControl
Downloads - Published:
This Modbus/TCP Integration Kit for ioProject allows Opto 22 controllers, using ioControl, to connect via Ethernet to any Ethernet/TCP-Modbus device and communicate using the Modbus/TCP protocol. ...more
CAN Protocol Integration Kit for PAC Project, Receive Only
Downloads - Published:
NOTE: This part number replaces an old part number, PAC-INT-CAN. This Opto 22 CAN Integration Kit for PAC Project - Receive Only provides a sample PAC Control strategy to enable your Opto 22...more
TL1 Integration Kit for PAC Control
Downloads - Published:
The TL1 Integration Kit for PAC Project™ allows Opto 22 SNAP PAC controllers using PAC Control™ to manage telecommunication network elements (NEs) using the Transaction Language 1 (TL1...more
DNP3 Integration Kit for PAC Control
Downloads - Published:
The DNP3 Integration Kit for PAC Control allows Opto 22 SNAP PAC controllers, using PAC Control™, to connect via an Ethernet network or serial port and communicate using DNP3, the Distributed...more
CAN Protocol Integration Kit for PAC Project, Transmit and Receive
Downloads - Published:
The Opto 22 CAN Integration Kit for PAC Project - Transmit and Receive provides sample PAC Control subroutines and charts so that your Opto 22 SNAP PAC System equipped with one or more SNAP-SCM...more
PAC Control Integration Kit for 60870-5-101 and 60870-5-104 Protocols
Downloads - Published:
The IEC60870-5 Integration Kit for PAC Project allows Opto 22 SNAP PAC controllers using PAC Control to connect via an Ethernet network and serial port or serial module and communicate using the...more
Allen-Bradley DF1 Library File
Downloads - Published:
Use this library file together with the Allen-Bradley DF1 Integration Kit for OptoControl. Version R3.1a of the library file is released for users of OptoControl firmware versions R3.1a or newer. If...more
Allen-Bradley DF1 Library File
Downloads - Published:
Use this library file together with the Allen-Bradley DF1 Integration Kit for OptoControl. Version R3.0a of the library file is released for users of OptoControl controller firmware versions R3.0a...more
OptoControl SDK
Downloads - Published:
The OptoControl SDK includes example material showing how to call Opto 22 drivers when communicating with Opto 22 FactoryFloor-based controllers. This version has been updated for FactoryFloor R4.0.
SNAP-SCM-CAN2B Module Firmware
Downloads - Published:
This firmware adds transmit capability to a SNAP-SCM-CAN2B serial communication module, which communicates with devices on a Controller Area Network (CAN). (A SNAP-SCM-CAN2B module with firmware R1.0d...more
.NET OptoMMP Software Development Kit for groov EPIC, groov RIO, and SNAP PAC
Downloads - Published:
This is a 100% managed OptoMMP software development kit (SDK) that provides a simple, easy-to-use interface for a classic .NET developer to quickly create an I/O-based application for Opto 22 products...more
PAMUX Systems SDK for PCI Adapter Cards
Downloads - Published:
Software developer toolkit for high-speed control of multiple digital and/or analog I/O points, using a brain (I/O processor). The SDK requires a PCI-AC51 or a PCIe-AC51 adapter card and one of the...more
PC-Based Direct I/O SDK for PCI Adapter Cards
Downloads - Published:
Software developer kit for direct, high-speed control of hundreds of digital I/O points. No brain (I/O processor) is needed. Use with the following adapter cards: PCI bus: PCI-AC5 adapter card PCIe bus: PCIe-AC5 adapter card
.NET Controller Software Development Kit for groov EPIC and SNAP PAC
Downloads - Published:
The .NET Controller Software Development Kit (SDK) for groov EPIC and SNAP PAC provides a simple, easy-to-use interface for a developer to quickly create an application to access objects in a PAC...more
.NET HART Software Development Kit for SNAP PAC
Downloads - Published:
HART® SNAP I/O analog modules are designed to provide communication with other Highway Addressable Remote Transducer (HART) current loop devices. HART SNAP I/O modules include the SNAP-AIMA-iH...more
C++ OptoMMP Software Development Kit for groov EPIC and SNAP PAC
Downloads - Published:
This free product is a C++ developer toolkit for Windows® and Linux. The toolkit lets you use C++ programming tools such as Visual Studio® 2015 (Unmanaged C++) or the GNU Compiler Collection to...more
BACnet/IP Integration Kit for PAC Control
Downloads - Published:
BACnet/IP Integration Kit for PAC Control™ (Part # PAC-INT-BAC-IP) enables Opto 22 PAC systems equipped with a PAC controller running a PAC Control strategy to communicate with devices on a...more
Modbus Integration Kit for PAC Control
Downloads - Published:
Version R9.3a (and higher) of the Modbus Integration Kit for PAC Control (part number PAC-INT-MB) allows Opto 22 SNAP PAC controllers to communicate using Modbus/TCP, Modbus Serial RTU...more
BACnet MS/TP Protocol Integration Kit for SNAP-PAC-S
Downloads - Published:
The BACnet MS/TP Integration Kit for PAC Project™ (Part # PAC-INT-BAC) enables your Opto 22 PAC system equipped with a SNAP-PAC-S1 or SNAP-PAC-S2 controller running a standard PAC Control...more
Allen-Bradley DF1 Integration Kit for PAC Control
Downloads - Published:
The Allen-Bradley DF1 Integration Kit provides users of Opto 22’s PAC Control software (version 8.0 and above) an easy method of communicating with Allen-Bradley drivers or PLCs using the...more