Resources & Tools

1 - 15 of 15 results for "sample"
Opto 22 Energy Monitoring Unit Quick Start
Documents - 1816 - Published:
The Opto 22 Energy Monitoring Unit (OPTOEMU1) is a complete package of hardware, software, and sample files that makes it easy to monitor a 3-phase electrical device—such as an air...more
Opto 22 Energy Monitoring Unit Data Sheet
Documents - 1815 - Published:
The Opto 22 Energy Monitoring Unit (OptoEMU1) is a complete package of hardware and software that lets you monitor energy usage for a 3-phase electrical device—such as an air conditioning and...more
Digital I/O for Raspberry Pi Selection Guide
Documents - 2208 - Published:
Now you can safely and reliably sense and switch industrial-level electrical loads with your Raspberry Pi® and Opto 22 industrially hardened digital I/O. This Selection Guide describes...more
User's Guide: DNP3 Integration Kit for PAC Control
Documents - 1773 - Published:
The DNP3 Integration Kit for PAC Control allows Opto 22 SNAP PAC controllers, using PAC Control™, to connect via an Ethernet network or serial port and communicate using DNP3, the Distributed...more
README for DNP3 Integration Kit for PAC Control
Documents - rm_dnp3_int_kit - Published:
README file for DNP3 Integration Kit for PAC Control. IMPORTANT: The DNP3 Integration Kit for PAC Control is available as a free download from our website. It is provided as...more
Modbus Integration Kit for PAC Control Technical Note
Documents - 2164 - Published:
The Modbus Integration Kit for PAC Control (part number PAC-INT-MB) allows Opto 22 hardware controllers using PAC Control to communicate using the Modbus Serial RTU, Modbus Serial ASCII, or Modbus...more
HART Sample Subroutines for PAC Control Technical Note
Documents - 2129 - Published:
This technical note describes how to install and use the HART (Highway Addressable Remote Transducer) Sample Subroutines for PAC Control. These subroutines allow Opto 22 controllers using PAC...more
Sharing groov View Data with Microsoft Excel
Documents - 2252 - Published:
This document provides instructions for the Sharing groov View Data with Microsoft Excel free code sample download. The instructions are also included in the zip file. If you want only the...more
Logging groov View Data to Microsoft Excel (Instructions)
Documents - 2251 - Published:
This document provides instructions for the Logging groov View Data to Microsoft Excel free code sample download. The instructions are also included in the zip file. If you want only the...more
Technical Note: Door Access Manager
Documents - 1366 - Published:
This technical note introduces two sample applications for use with SNAP-SCM-W2 (Wiegand) serial modules and SNAP Ultimate I/O: an ioControl strategy that configures modules and handles up to 16 doors,...more
CAN RX/TX Integration Kit for PAC Project Technical Note
Documents - 2151 - Published:
The Opto 22 CAN Integration Kit for PAC Project - Transmit and Receive (part number PAC-INT-CAN-RXTX) provides sample PAC Control subroutines and charts so that your Opto 22 SNAP PAC System...more
SNAP PAC RESTful API to Access Database Technical Note
Documents - 2204 - Published:
This technical note describes how to read data from an Opto 22 SNAP PAC programmable automation controller and place it in a Microsoft Access database. This tech note accompanies the sample...more
SNAP PAC RESTful API to Excel Spreadsheet Technical Note
Documents - 2203 - Published:
This technical note describes how to read from and write to an Opto 22 SNAP PAC programmable automation controller via the PAC’s RESTful API, using Visual Basic for Applications (VBA) with...more
Using the SNAP PAC REST API with Excel
Documents - 2229 - Published:
This document (included in OptoTutorial 2229) provides the instructions to create a Microsoft Excel® worksheet with Visual Basic® for Applications (VBA) macros that: Read and write to...more