Support

Resources & Tools

101 - 169 of 169 results for "groov"
Comparison of PLCs and Ladder Logic with Opto 22 Hardware and Software
Documents - 1087 - Published:
Opto 22 controllers like the groov EPIC edge programmable industrial controller and SNAP PACs (programmable automation controllers) are fundamentally different from PLCs (programmable logic...more
groov Products Cybersecurity Design and Best Practices Technical Note
Documents - 2310 - Published:
Version en Espanol When you’re gathering, processing, and sharing operational data from industrial equipment on premises or located remotely, cybersecurity is a big worry. Opto 22’s groov...more
groov Server for Windows Data Sheet
Documents - 2060 - Published:
Opto 22’s groov® Server for Windows (GROOV-SVR-WIN-BASE) runs on a Microsoft® Windows® computer and provides groov View software for building and viewing operator interfaces...more
White Paper: I/O for the IIoT
Documents - 2338 - Published:
In an era of increasing connectivity and technical capabilities, it seems like simple ideas should be simple to achieve. But industrial internet of things projects, even simple ones, are still...more
groov Server for Windows Release Notes
Documents - rm_groov_server - Published:
Latest release notes for groov Server for Windows. This document provides information on new features, enhancements, and bug fixes. To get the latest updates for groov Server for Windows, go to...more
Press Release: groov EPIC Serial Module
Documents - 2299 - Published:
Opto 22 releases four-port serial communication module for new groov EPIC System. GRV-CSERI-4 serial modules expand EPIC system capabilities to add communication with RS-232 and RS-485 serial devices.
Press Release: Announcing groov EPIC
Documents - 2291 - Published:
Opto 22 announces world's first Edge Programmable Industrial Controller: groov EPIC. This completely new system brings the future of automation to the present by combining guaranteed-for...more
Press Release: Opto 22 introduces new groov EPIC and groov RIO models with Ignition 8 onboard
Documents - 2367 - Published:
Opto 22 introduces two new products to run the latest version of Inductive Automation’s Ignition and Ignition Edge. The new groov EPIC® processor, GRV-EPIC-PR2, and groov RIO® edge I/O...more
Press Release: Opto 22 Releases groov EPIC version 1.4.1
Documents - 2326 - Published:
Opto 22’s groov EPIC firmware update version 1.4.1 enhances secure remote access with VPN and adds Inductive Automation Ignition options. The new update adds virtual private networking, new...more
groov EPIC User's Guide
Documents - 2267 - Published:
This user's guide shows you how to assemble, initialize, configure, and maintain a groov EPIC system and use groov EPIC processors, part numbers GRV-EPIC-PR1 and GRV-EPIC-PR2. ...more
Press Release: Opto 22's groov EPIC Learning Center Delivers Hands-on Training
Documents - 2313 - Published:
Opto 22's groov EPIC Learning Center delivers hands-on training. This complete functional system lets engineers and developers train, experiment and even develop proof of concept projects right on the workbench.
Press Release: Another win for Opto 22’s groov EPIC
Documents - 2334 - Published:
Opto 22 is proud to announce that, for the second year in a row, groov EPIC® has been selected as a winner in Control Engineering’s Engineers’ Choice Awards. The opportunity to...more
groov EPIC Brochure
Documents - 2396 - Published:
It’s not a PLC. It’s not a PAC. It’s not a PC. It’s an Edge Programmable Industrial Controller (EPIC), and the acronym says it all. This brochure explores all of Opto 22's groov EPIC product line.
groov EPIC Chassis Data Sheet
Documents - 2247 - Published:
The groov EPIC® chassis is designed to hold a groov EPIC processor and power supply, with models available to hold several groov® I/O modules. This data sheet includes...more
Press Release: Opto 22 Releases Two More groov EPIC I/O Modules for 2019
Documents - 2333 - Published:
The new modules support CAN bus integration and high-density temperature sensing. The two new modules include: GRV-CCANI-2 (serial communication, 2 channels, CAN 2.0B, channel-to-channel...more
groov EPIC System Product Guide
Documents - 2250 - Published:
This document lists all the Opto 22 groov EPIC® System part numbers, including groov EPIC processors, power supplies, and chassis; groov I/O modules; and groov...more
groov EPIC Learning Center Setup
Documents - 2311 - Published:
Note: This document applies to the obsolete product GRV-EPIC-LC.  For the assembly document for the new groov EPIC Learning Center 2 (GRV-EPIC-LC2), review groov EPIC Learning Center 2 Assembly...more
groov EPIC Processor Data Sheet
Documents - 2245 - Published:
This data sheet describes Opto 22's groov EPIC® processors, part numbers GRV-EPIC-PR1 and GRV-EPIC-PR2, which are embedded Linux®, real-time controllers with...more
.NET OptoMMP SDK for groov EPIC and SNAP PAC
Documents - 2135 - Published:
The .NET OptoMMP Software Development Kit (SDK) for groov EPIC and SNAP PAC provides an easy-to-use interface for a developer to quickly create an Ethernet I/O-based application for Opto 22...more
groov EPIC Processor Firmware Release Notes
Documents - rm_grv_epic_pr1 - Published:
Release notes for the latest update to firmware for the groov EPIC processors (part numbers GRV-EPIC-PR1, GRV-EPIC-PR2). Includes information on new features, enhancements, and bug fixes for each...more
Technical Note: groov EPIC Update Checklist
Documents - 2327 - Published:
This basic checklist gives a high-level view of steps for updating your groov EPIC processor with new firmware. If you've updated your GRV-EPIC-PR1 before, the checklist may be all you need; but...more
Technical Note: Migrating from SNAP PAC to groov EPIC
Documents - 2323 - Published:
If you already have an Opto 22 SNAP PAC System, you may be looking at groov EPIC and wondering how it is different, and whether you should migrate to an EPIC system. What would you gain? What issues...more
UKCA Declaration of Conformity (groov EPIC and groov RIO)
Documents - 2370 - Published:
This document is the Manufacturer's Declaration of Conformity for the products listed herein, in accordance with the rules, regulations and standards of the United Kingdom. The models cited...more
groov EPIC Processor Handling Instructions
Documents - 2378 - Published:
This one-page document provides important information on how to properly carry, install, and remove a groov EPIC processor to a chassis (see groov EPIC Chassis Data Sheet, form 2247). This page is also...more
groov EPIC Power Supplies, Converters, and Adapters Data Sheet
Documents - 2246 - Published:
groov EPIC® power supplies, converters, and adapters provide AC or DC power for your Opto 22 groov EPIC System. This document provides information, specifications, and dimensional...more
.NET Controller SDK for groov EPIC and SNAP PAC Technical Note
Documents - 2148 - Published:
The .NET Controller Software Development Kit (SDK) for groov EPIC and SNAP PAC provides a simple, easy-to-use interface for a developer to quickly create an application to access objects in a PAC...more
Installing & Configuring Samba on groov EPIC Technical Note
Documents - 2321 - Published:
This technical note shows you how to install Samba on your groov EPIC processor. Samba is free software that provides the application necessary to use the SMB/CIFS protocol, which supports network...more
La Ciberseguridad y Mejores Practicas para groov EPIC
Documents - 2310s - Published:
Cuando se junta, procesa, y comparte datos de equipos industriales en las instalaciones o en sitios remotos, la ciberseguridad es una gran preocupacion. El sistema de groov EPIC® de Opto ...more
Installing & Configuring MariaDB Database Server on groov EPIC Technical Note
Documents - 2320 - Published:
This technical note shows you how to install MariaDB, a small, lightweight, open-source database server, on your groov EPIC processor. This tech note is only for advanced developers who are...more
Press Release: Opto 22 Releases Three New groov EPIC I/O Modules
Documents - 2328 - Published:
New I/O modules address demands of specialty and low-cost applications, including dry contact monitoring, temperature control, and mixed voltage. The three new modules include: GRV-IDCSW-12...more
Subscribe and Publish with MQTT Nodes, groov View, & SNAP PAC
Documents - 2235 - Published:
This OptoTutorial shows how to: Use Node-RED to subscribe and publish to an MQTT message stream Parse message strings Display data from a message in groov View Push data from groov View...more
Press Release: Opto 22 Responds to Inquiries Regarding URGENT/11
Documents - 2322 - Published:
Opto 22 would like to reassure our customers that, after careful and thorough review, we can state that none of our hardware or software products contain the VxWorks IPnet TCP/IP stack or variants of...more
Legacy Edition, PAC Control User's Guide
Documents - 1710 - Published:
This document is the Legacy Edition of the PAC Control User's Guide. It includes all the information you need to use PAC Control with groov EPIC, SNAP PAC, and legacy hardware. Use this guide if...more
Legacy Edition, PAC Control Command Reference
Documents - 1711 - Published:
This document is the Legacy Edition of the PAC Control Command Reference. This guide includes all the commands that apply to groov EPIC, SNAP PAC, and legacy hardware. Use this guide if your PAC...more
PAC Display User's Guide
Documents - 1702 - Published:
This guide shows you how to use PAC Display, part of the PAC Project Software Suite, to create human-machine interfaces (HMIs) for your groov EPIC or SNAP PAC System. NOTE: If you are using PAC...more
PAC Control User's Guide
Documents - 1700 - Published:
This document shows you how to use PAC Control, part of the PAC Project Software Suite, to develop control programs to run on groov EPIC processors and SNAP PAC controllers. These programs, called...more
Legacy Edition, PAC Display User's Guide
Documents - 1712 - Published:
This document is the Legacy Edition of the PAC Display User's Guide. This guide includes all the information you need if you are using groov EPIC, SNAP PAC, and older Opto 22 hardware with PAC...more
OptoOPCServer User's Guide
Documents - 1439 - Published:
This guide shows you how to use OptoOPCServer, part of the PAC Project Software Suite, to share data from your Opto 22 groov EPIC System, SNAP PAC System, or Ethernet-based I/O units with OPC...more
OptoTagPreserve Command-Line Utility Technical Note
Documents - 2190 - Published:
OptoTagPreserve™ is a command-line tool that archives and restores tags and values in PAC Control™ strategies running on a groov EPIC processor, PAC R-series or S-series controller, or on...more
PAC Project Data Sheet
Documents - 1699 - Published:
The PAC Project software suite provides flowchart-based control programming, a Microsoft Windows-based HMI, and more for your groov EPIC System or SNAP PAC System. PAC Project comes in two forms: Basic...more
OptoMMP Protocol Guide
Documents - 1465 - Published:
This guide is for programmers who are writing custom applications to communicate with Opto 22 memory-mapped devices. These devices include groov EPIC processors; groov RIO modules; SNAP PAC...more
PAC Control Command Reference
Documents - 1701 - Published:
This document provides detailed information on commands used in PAC Control, part of the PAC Project Software Suite. PAC Control is control programming software used by Opto 22's groov EPIC System...more
Configuring Email Applications for Opto 22 Products
Documents - 2384 - Published:
You can use many Opto 22 products to send email notifications to keep engineers and technicians aware of important conditions in your system. For example: You can send email through a PAC Control...more
Opto 22 Mobile Apps for Automation
Documents - 2126 - Published:
** NOTE: The Opto iPAC app is no longer available on the Apple Store. This document remains on our website for customers who already have the app and need assistance with it. You may also want to...more
Using IEEE Floats in Opto 22 Products
Documents - 2386 - Published:
While computers, CPUs, and electronic devices store numbers in binary format, most often they represent real numbers as floating point numbers, or floats. For example, in industrial automation...more
Using Power Supplies with Opto 22 Systems
Documents - 1271 - Published:
This technical note gives an overview of power supplies for use with many Opto 22 control systems and recommends types of power supplies for Opto 22 mounting racks. This note applies to SNAP...more
Optimizing PAC Project System Performance Technical Note
Documents - 1776 - Published:
This technical note includes optimization tips to help you design your PAC Project™ system and program your PAC Control™ strategy to ensure optimum system performance. These tips are also...more
Split-Core Current Transformers Data Sheet
Documents - 1938 - Published:
Split-core current transformers (CTs) offer an easy, safe, and inexpensive method for monitoring electrical energy usage. This data sheet describes split-core CTs with a 0.333 VAC secondary. These...more
PC-Based I/O Overview
Documents - 1165 - Published:
This document shows examples of system architecture for PC-based I/O control systems and lists Opto 22 products that work together for PC-based control. System examples include: Ethernet...more
Case Study: Rust Automation & Controls
Documents - 2388 - Published:
View in html Remote I/O over MQTT helped Rust Automation complete a critical water management project for the Pinebrook Water District in Boulder, Colorado. Using a combination of Opto 22 groov...more
Case Study: Intrinsics Imaging
Documents - 2389 - Published:
View in html Intrinsics Imaging’s AI-powered Heijunka Vision analytics-as-a-service software replaces specialized, difficult to maintain machine vision systems. But when Intrinsics was...more
Case Study: Lethbridge College Gains Flexible Automation System for Research Requirements
Documents - 2404 - Published:
View in html The Aquaculture Centre of Excellence at Lethbridge College mimics conditions in large commercial aquaponics facilities, but for research purposes, they needed a highly flexible...more
SNAP PAC Brains User's Guide
Documents - 1690 - Published:
NOTE: Due to the unavailability of essential parts, all SNAP PAC brains (EB-series) are obsolete and no longer available. Instead of Ethernet-based brains, use a SNAP-PAC-R1 controller/brain; it has...more
SNAP PAC Brains Data Sheet
Documents - 1689 - Published:
NOTE: Due to the unavailability of essential parts, SNAP PAC brains are obsolete and no longer available. Instead of Ethernet-based brains, use a SNAP-PAC-R1 controller/brain; it has all the...more
SNAP PAC R-Series Controllers User's Guide
Documents - 1595 - Published:
This user's guide shows you how to install and use Opto 22's SNAP PAC R-series programmable automation controllers. SNAP PAC R-series controllers are on-the-rack industrial controllers. Each...more

Page 2 of 2